Пікірлер
@ipcsl316 15 сағат бұрын
Succinctly and simply demonstrated this essential operation to ensure an air lock free cooling system for the Bongo. The last 2 minutes of this video completed provided instructions on the last stage of the process and we now have a well running Bongo ourselves. Many thanks
@TheTriumphGuy101 13 сағат бұрын
I’m so happy I can help! :)
@XoXHannah41XoX Күн бұрын
Hi thanks for the video it's super informative! I'd be interested in the car checks document, did you end up posting it online somewhere?
@TheTriumphGuy101 18 сағат бұрын
@@XoXHannah41XoX hey hey! No I didn’t in the end! Thank you for reminding me, I will make that video soon :D
@nevo6400 Күн бұрын
Not driving it enough
@TheTriumphGuy101 Күн бұрын
@@nevo6400 yeah! Well my mother drives it every day but it’s not been driven far enough
@nevo6400 Күн бұрын
Yeah needs longer driving each day... Had the exact problem with my mini cooper....
@TheTriumphGuy101 Күн бұрын
@ yeah it’s not ideal, I’m going to do an oil change / filter (it’s due soon anyways) and then tell my mum she must drive it further haha
@Reamees1 2 күн бұрын
Please more videos with the G
@TheTriumphGuy101 2 күн бұрын
I wish! I’ve sold it today unfortunately:(
@hamster639 2 күн бұрын
Condensation, normal on those cars.
@TheTriumphGuy101 2 күн бұрын
Yeah exactly :)
@Alex-bf7mc 5 күн бұрын
The other side is literally impossible. Terrible design
@TheTriumphGuy101 5 күн бұрын
@@Alex-bf7mc yeah it’s an awful design! I removed the whole headlight - video here: Point to note - some of these have 3 bolts to remove, mine only had two. Peugeot 208 Headlight Assembly Removal | Step-by-Step Guide kzbin.info/www/bejne/m4Wap6hpprSFoK8
@hasanwasti2374 5 күн бұрын
The Peugeot 208 (2014 model typically has three bolts securing each headlight. Two of these bolts are located in the engine compartment near the headlight, and the third bolt is found behind the front bumper
@TheTriumphGuy101 5 күн бұрын
Yeah like I said in the other comment. I didn’t remove 3 bolts. Maybe this is for LED headlights only :)
@hasanwasti2374 5 күн бұрын
He cut the video as he unscrew the 3rd bolt which is behind the bumper. Why you are not telling the full truth? I just opened my Peugeot 208 2014 headlights by seeing your video. When the headlights is not coming off i call my friend who is Peugeot mechanic he said there is a 3rd bolt behind the front bumper. And as i remove the 3rd bolt now my headlight is free to remove.
@TheTriumphGuy101 5 күн бұрын
Ahh, I never removed a third bolt. Maybe it’s because yours are LED? I flimed everything I have done.
@GrindAndClap 6 күн бұрын
Absolutely 💯 Keep it real
@TheTriumphGuy101 6 күн бұрын
Hey guys! Please check out my playlist where I fix people’s cars for FREE :D kzbin.info/aero/PLh2LtQu0AiMqmnyydUs8yAxVin37fESgK&si=2alkZPx5ya87c25t
@alandavies1054 7 күн бұрын
The other side is much more difficult…did you not have a spring on it to hold in the bulb ? Mine did and it’s almost impossible to get the spring on again…I lost the original one in the engine bay and had to buy a pack of them from Halfords 😂
@TheTriumphGuy101 7 күн бұрын
Hey hey! Check this video out on how to remove headlight cluster :) I removed it to do the other side ;D Peugeot 208 Headlight Assembly Removal | Step-by-Step Guide kzbin.info/www/bejne/m4Wap6hpprSFoK8
@tootifrutti1191 8 күн бұрын
I tried this, it didnt work. Is there another way to reset?
@TheTriumphGuy101 7 күн бұрын
It should work :) have you got the ability to plug it in? :)
@andreeabianca5459 8 күн бұрын
I know the video is old but my experience might help someone save a lot of money, I was experiencing only sometimes when I really had to brake that the pedal suddenly turns hard and it won’t brake, I changed the brake booster, master cylinder, vacuum pump (tandem pump), the hoses, the brakes, the fluid, the callipers and discs, basically the entire sistem with still not solving the issue, it turns out there there is a rubber connector that due to old age when vacuum is created it sucks itself and blocks the vacuum, a piece that costs 3€ and its located where the hose goes from the engine place towards the interior of the car, just follow the vaccum line and you will find it
@TheTriumphGuy101 8 күн бұрын
@@andreeabianca5459 that is really helpful advice! Thank you so much! This may save other viewers a small fortune!
@vandre12 11 күн бұрын
When my VW is fully warmed up sitting idle the heat sucks barley warm but when I start driving I can actually feel hot air … any ideas what’s causing this ?
@TheTriumphGuy101 11 күн бұрын
Hey hey! Great question! Is it 100% reading at 90 degrees at idle? These cars are well known for taking a while to heat up. Out of all cars I have owned (I’ve owned quite a lot) these heat up the slowest, even after a new heater core
@chimeydorje511 13 күн бұрын
My heater blows cold air, temperature is good no leaks , took out the heater core and there’s no blockage put it back but one of the pipe is cold and the other one is hit m not sure what could be the problem now
@TheTriumphGuy101 12 күн бұрын
Hey, out of interest how did you test for no blockages in the heater core? If one pipe is hot and one is cold then it will defiantly be a blocked heater core. Mine was £40 and I replaced it myself :) these heater cores are prone to blocking in VWs due to the Silcone balls they put in the expansion tank
@joyfunnell2780 13 күн бұрын
Super helpful video, going to view a car tomorrow after previously buying a lemon that I had to scrap after just 1 year, will def be doing a better inspection this time and have done extensive online pre viewing checks.
@TheTriumphGuy101 13 күн бұрын
@@joyfunnell2780 thank you so much for your kind comment, it genuinely means so much to me. I have nearly 200 videos and a lot of my older stuff (poorly filmed) gets a lot of negitive comments - I am genuinely only trying to help. If you are local to me (Dorset England) I will happily veiw a car with you if you want a mechanics eyes on it. Or, message my FB “The Triumph Guy” if you have any questions and want to send pics / videos of cars you want to buy. I am always here to help people
@showamantv5219 13 күн бұрын
My heat comes up sometimes now, depending on weather but I do believe there’s something making it stay cold random times
@TheTriumphGuy101 13 күн бұрын
If it’s completely random, have you looked at the lever I show in the video? Maybe it could be an electrical fault with that lever. If I can help in any other way let me know
@JackWillers-q5o 14 күн бұрын
Same issue with my touran but them 2 pipes inside the cabin don’t seem to get hot? Changed thermostat and flushed all the coolant out including rad I’ve also taken them pipes off engine bay side for the matrix/core and jet washed that out still no luck ?
@TheTriumphGuy101 14 күн бұрын
@JackWillers-q5o hey hey!! Both pipes don’t get hot? Confirm that the car is at operating temperature (90 degrees)
@JackWillers-q5o 14 күн бұрын
@ yeah gets up to temperature and sits there happily
@TheTriumphGuy101 14 күн бұрын
@JackWillers-q5o ok, can you message me on Facebook? “The Triumph Guy” Il take a pic of my car and show you what to do next.
@JackWillers-q5o 14 күн бұрын
I’m getting codes saying heater unit locked ? No flame? Fuel gage lower limit not reached? Low voltage cut-out(automatic)? Glow plug flame monitoring implausible signal ? Not sure if any are related but it comes up heating auxiliary’s and they are the cards that show. Thank you so much for you’re reply’s im at a lost end with it
@JackWillers-q5o 14 күн бұрын
@@TheTriumphGuy101 done mate
@TheTriumphGuy101 16 күн бұрын
Good afternoon all! I am fixing GOOD people’s cars for free, these could be friends / family / strangers. Please check out my playlist - kzbin.info/aero/PLh2LtQu0AiMqmnyydUs8yAxVin37fESgK&si=vrq6ixntSwUrJugZ To help you can donate money via the “super thanks” function, ALL MONEY I RECIVE VIA SUPER THANKS WILL GO TOWARDS PARTS :D
@stevesjobsUK 17 күн бұрын
Typical misleading KZbin video. There are 3 bolts.........
@TheTriumphGuy101 17 күн бұрын
@@stevesjobsUK I didn’t remove 3 bolts.
@TheTriumphGuy101 17 күн бұрын
I’ve just looked through the video, and the process is correct. Two bolts on the headlight it’s self. 2 torques screws to access the bolt closer to the Center. I don’t know if you’ve skipped certain parts of the videos This video is to help people, I would appreciate it if you didn’t tar me with the “typical misleading KZbin video” as this isn’t the case.
@stevesjobsUK 17 күн бұрын
@TheTriumphGuy101 but you've now had 2 people tell you their headlights have 3 bolts, one is hidden by the bumper. Perhaps you are wrong. From an engineering perspective only 2 bolts would be a poor design.
@TheTriumphGuy101 17 күн бұрын
@ I would definitely know if I removed 3 bolts. Unless the headlights with LED are different. Mine are the basic headlights.
@jeffreybernard4089 20 күн бұрын
i wd subscribe but frankly the camera work is terrible, not even keeping the object in view.. would have been nice to see.. how you cleaned it, how you placed the condenser and the tightening and untightening of screws
@TheTriumphGuy101 20 күн бұрын
@@jeffreybernard4089 hey hey! Thanks for your kind comment, I have improved massively on my camera work since this video. I took ALOT of critique on this video and my earlier ones too. I know have a tri pod and another stand for bonnet work. Again, thank you so much for not being nasty about it like other do. Have a great evening and a happy new year
@jeffreybernard4089 20 күн бұрын
ok.. had i seen the comments i probably wouldnt have added to the negativity. so yea next time please explain how you cleaned it and where you put what kind of oil. i am doing this today. i changed the cap and the rotor.. all worked fine but i got some shuddering on acceleration, so im sure i need the points replaced also. had my 73 about 1 year and never got to the ignition before. fascinating! wish me luck.
@TheTriumphGuy101 20 күн бұрын
@@jeffreybernard4089 good luck! I’ve not switched to an electric ignition. To be honest when I need to change friends points I will re make this video:) Thank you again for taking your time to give me feedback though! I genuinely appreciate it :D
@jeffreybernard4089 18 күн бұрын
yesterday i changed the rotor and cap but the points i got from rimmer were not the right ones. so i removed the old one and on inspection the ground side had like a mini hill on it and the pos side had a big hole. so not having new ones, i took a dremel grinding stone to it and got both sides as flat as possible. then i reinstalled. in the process i used carburetor cleaner and a q tip to clean the plate and other yucky areas. a bit of 3 in 1 in the felt under the rotor and a bit in each hole. i pulled on the vacuum advance to make sure it moved freely. then i put the car in 4th gear and moved it forward till the bump on the rotor post was highest. using a .015 in gauge it was just a bit tight so i loosened the screw a bit and got it to open a hair more. tightened it… checked with gauge again and i put it all back together. car started incredibly fast. took it out for a drive: best its ever driven.
@TheTriumphGuy101 18 күн бұрын
@ nice one! Happy for you :D I love driving my car once it’s all been tuned up perfectly! I was extremely lucky to buy this car when it was tuned perfectly so I now know what it should be like :D I had a dodgy dizzie which I’d have to do timing on a lot. I learnt to do it by ear eventually, anyways, fast forward a bit I now have electronic ignition and a rebuilt dizzie :D I now only check timing once a year and rarely need to a adjust!
@jeffreybernard4089 20 күн бұрын
i wd subscribe but frankly the camera work is terrible, not even keeping the object in view.. would have been nice to see.. how you cleaned it, how you placed the condenser and the tightening and untightening of screws
@irfanozaydn9953 21 күн бұрын
Hello, how did you do it without removing the bumper?
@TheTriumphGuy101 20 күн бұрын
Thanks for the comment, you don’t need to remove the bumper :) Watch the video all the way through and it shows you. Any questions, please don’t hesitate to get in touch
@irfanozaydn9953 19 күн бұрын
@@TheTriumphGuy101 Thank you very much, I will try it as soon as possible, the LED is faulty, I am thinking of checking it out.
@TheTriumphGuy101 19 күн бұрын
@ ahh good luck :D
@irfanozaydn9953 19 күн бұрын
I don't think I can succeed but I will try :D
@onemarone2010 17 күн бұрын
@@TheTriumphGuy101 there's 3rd bolt at the side..
@cakefactoryy 21 күн бұрын
Bro this was super helpful!
@TheTriumphGuy101 21 күн бұрын
@@cakefactoryy genuinely I’m so happy to help!! There will be a clutch job and a timing belt change on this car soon! So make sure you stay tuned :D
@rolandkettle 21 күн бұрын
This is really helpful, thanks. What size bit did you use for the bolts either side of the latch?
@TheTriumphGuy101 21 күн бұрын
@@rolandkettle hey heyyy! Thank you for your comment :D I’m really sorry, but I have forgotten the size of the top of my head. I had to barrow one as it’s fairly large
@rolandkettle 21 күн бұрын
I now know the answer - it’s an M8 spline bolt. Don’t try bodging it with a normal hex bit like I did the first time, you’ll burr it! Thanks again, the video was so useful for fixing it.
@nonegiven9579 23 күн бұрын
I had this exact issue and unfortunately the temporary fix didn't work. Ended up getting a replacement 2nd hand tandem pump off eBay, it was off a newer vehicle and the pump outlet design had been changed to prevent this loose fitting issue.
@TheTriumphGuy101 23 күн бұрын
Ahhh unluckily, apparently Bosche make a replacement which is better and more reliable
@nonegiven9579 23 күн бұрын
Great video. Do you need to loosen off the brake master cylinder cap before winding back the caliper pistons?
@TheTriumphGuy101 23 күн бұрын
Thank you so much for your kind words, Yes, sorry did I miss that in the video? I do a lot of videos sometimes I miss this step.
@tomt2428 23 күн бұрын
Very helpful video, does it make a different if it’s petrol or diesel or is the process the same.
@TheTriumphGuy101 23 күн бұрын
Good morning, Thank you for your very kind comment, This was a diesel, I presume the same apply on a petrol, check to see if you have the “bleeding” hose, PLEASE PLEASE PLEASE, watch the video all the way through, I stress from extremely important points at the end. One being - bring the car to running temp! This is a must. Once and only once it’s at running temp do up the expansion tank and carry on “seesawing”
@TheTriumphGuy101 29 күн бұрын
How to Drain, Flush, and Bleed the Coolant System on a Mazda Bongo | Complete Guide kzbin.info/www/bejne/bHvTkmmvjqx3qs0
@TheTriumphGuy101 29 күн бұрын
Full playlist here - kzbin.info/aero/PLh2LtQu0AiMq1naugcgV6lOBkjQHwdZZM&si=H2pIemdrRIlUvzg_
@AmitMalulOfficial Ай бұрын
Is it safe to do this with the electrical system without using a diagnostic tool? Doesn't do any damage or trigger a light on the dashboard?
@TheTriumphGuy101 Ай бұрын
@@AmitMalulOfficial I didn’t use a diagnostic tool. Essentially if you have a diagnostic tool this job is ALOT easier as you do not need to remove the electric motor :) Good luck
@AmitMalulOfficial Ай бұрын
The calipper pistones need to be rotated while pushed?
@999Coaching Ай бұрын
Great advice! Just did this myself and it worked. All the other videos wanted me to get under the car and take panels off. Life saver
@TheTriumphGuy101 Ай бұрын
Thank you so much for your comment :) I am glad I was able to help :D
@SakibAhsanTamim-x8s Ай бұрын
Hello, "The Triumph Guy" I was analyzing your channel and saw that in your channel have some problem, That's why your channel is not much growing and not getting much engagement, If you can solve these problems, Your channel will grow like a storm. If you tell I can tell these problems. Where can I tell? Here or ig or where?
@TheTriumphGuy101 Ай бұрын
Hey thanks for the comment, I’m pretty happy with the growth and engagement :) Have a great day
@raymondarnold5716 Ай бұрын
Nice one Father Christmas 😉
@TheTriumphGuy101 Ай бұрын
Haha happy Christmas!!!
@GrindAndClap Ай бұрын
woooo 1st!!
@mrslimz4148 Ай бұрын
My heaters only blow cold air
@TheTriumphGuy101 Ай бұрын
Hey hey! It’s probably a blocked heater core then :)
@TheTriumphGuy101 Ай бұрын
Check out this playlist for all things Vw Touran! kzbin.info/aero/PLh2LtQu0AiMpRetNd72ibzc5P7A1ZD7j_&si=DR5YpgL87ZT6YWWj
@beedronesuk9848 Ай бұрын
Cool video
@TheTriumphGuy101 Ай бұрын
Thank you so much ;D I have some long form on this caravan too! I have also been away in it now over the summer - still needs some minor bits!
@chirho100 Ай бұрын
Jaguar’s new logo looks like two 9s that are 69 each other.
@treykearns4867 Ай бұрын
A beautiful breed, a wonderful steed, it's something i need, I'd love one, indeed, though I can't afford one, i must concede. It makes my heart bleed.
@TheTriumphGuy101 Ай бұрын
Great poem :)
@raymondarnold5716 Ай бұрын
Slow down on the picture flipping, I can’t tell what is what 😎
@TheTriumphGuy101 Ай бұрын
Haha sorry bro ;)
@Boababa-fn3mr Ай бұрын
He said vag instead of vadge 😂
@TheTriumphGuy101 Ай бұрын
VW - AUDI - GROUP ;)
@Boababa-fn3mr Ай бұрын
@TheTriumphGuy101 I know. Most people deliberately call it VADGE for fun.
@TheTriumphGuy101 Ай бұрын
@@Boababa-fn3mr oh hahahaha! Il do it next time ;) I own a VW and an Audi, so I will be doing more content on them soon! Hahaha
@andre-7423 Ай бұрын
Jaguar is just changing their customer base, now it is a car or for sexual deviants and freaks.
@gregstretton8584 Ай бұрын
Copy nothing...(except the Puma brand) nobody will notice :-)
@TheTriumphGuy101 Ай бұрын
Haha! No one will ever notice 😂😂
@TonydaSilva-s4f Ай бұрын
advertizing a 69 it looks like 2 Js upside down
@ArturKruczek-v3u Ай бұрын
How to install clutch sensor in Volvo V60, model 1.810.236 sensor
@Peteablokeoutdoors Ай бұрын
Great video mate 👍🏻
@TheTriumphGuy101 Ай бұрын
Thank you :D
@athulmuttissery7530 Ай бұрын
The new logo is reminiscent of the comode manufacturer of the same name.
@TheTriumphGuy101 Ай бұрын
@@athulmuttissery7530 can you explain further please :)? Thank you again for taking your time to comment on my video and I hope you have a great weekend :)
@athulmuttissery7530 Ай бұрын
@TheTriumphGuy101 you can search jaquar. The new logo of jaguar is similar to jaquar. Jaquar makes toilets.
@AndyBluSkydive Ай бұрын
..... go
@TheTriumphGuy101 Ай бұрын
@@AndyBluSkydive ?? :)
@TheTriumphGuy101 Ай бұрын
:)?
@TheTriumphGuy101 Ай бұрын
@@AndyBluSkydive oh hahaha just figured out why you said that! Sorry about that! I thought I edited it out! 🤦♂️ I hope you enjoyed the video though and have a great weekend!
@blackworx Ай бұрын
"everything I don't like is woke"
@TheTriumphGuy101 Ай бұрын
@@blackworx how would you best describe the re brand :)? Also, thank you for your comment :)
@TheTriumphGuy101 Ай бұрын
Thank you for your comment :) How would you best describe the new branding? :)