Would like to visit again some time as I do like the site. Only thing that put me off was the team balance was very one sided towards players that were obviously regulars. This made it very hard for my team to make any progress and seemed very off putting to some new players that were there.

Yeah I have been looming to see what the storage charge amps should be on my 11.1v 1100mah lipo and finally someone showed me it was 1.0 amps

Yes I'm still enjoying my MP5 but if I'm honest I have heard some bad reviews on the Bolt MP5's particularly the SD versions for general build quality and fire selector issues with all models due to the plastic selector disc used inside the RIF. I wouldn't write off the Bolt brand but maybe be ware of the MP5 models. Definitely steer clear of the SD versions.

Not as far as I'm aware they never said anything about upgrades on Airsoft Competitions where I won it. FPS has dropped off quite a bit since this was filmed so I have replaced the hop rubber to a Modify X Range 70°, replaced the original spring with a ZCI M150 AEG spring, fitted a spring bearing and removed the barrel bridge. Currently shooting at 470fps on 0.2g (2.04 Joules) and 330fps on 0.43g (2.16 Joules) . Seems to have good range and accuracy but not really been able to test this properly yet.

I believe it should be fine it will just take a while. Do a bit more research in the RC community who use batteries of that size more than I would in airsoft. For example RC cars, helicopters and drones.

For storage mode it seems the Imax won't allow anything higher than 1 amp so I'd go with that on 11.1v for your battery then just let it do its thing till it bleeps and flashes up the end message.

@@zombiesquadairsoft1492 thanks! And why do you use storage mode and not discharge?

@@radjan666 discharge would drain the battery completely if left to completion which is not a good state for LiPo batteries unless you are using it as part of a disposal process. Storage mode will stop charging/discharging when the correct storage voltage is reached.

@@radjan666 Just found this page online which has a lot of info about LiPo batteries www.cnydrones.org/lipo-batteries-and-safety-for-beginners/

Sorry its taken a while to get back to you but I'm afraid I can't remember what it cost as several of the parts I fitted I had lying around at home from previous projects.

If I'm honest at first this particular one was not good. Tried running it on 7.4v 20c battery and it kept jamming up eventually damaging the gears. Fixed that and switched to either a 7.4v 25c or an 11.1v 15C and now runs spot on. Since then I've upgraded hop rubber and nub to Mapleleaf ones and range and accuracy is amazing. Seems to be my main RIF of choice now. If you do decide to buy a Bolt RIF and your on Facebook then look for the Bolt owners group that I run.

@@zombiesquadairsoft1492 thanks for the reply appreciate it thinking of the mp5 with a m9 pistol

That's what I'd do based on the research I've done.

Charge at 8.4v Reason is because a 7.4v battery is 2s. And each cell is 4.2v. So 2x4.2 = 8.4v

You are correct. For a single cell to be fully charged it should be 4.2v but in this video I don't mention the cell voltages and I am only demonstrating how to start the balance charge process. It dose not show the completed charging process.

The front hand rail kit is from Cyma. Hand to do a bit of work with a Dremel to make it fit. I have since changed the mosfet from the Gate X ASR to a Jefftron active brake trigger contact set as well.

@@zombiesquadairsoft1492 Thanks for the quick reply and good to know!

@@zombiesquadairsoft1492 Delighted I came across this vid, it's hard to find reviews on the Bolt MP5 and I'm looking to buy one and extra mags so the CYMA mag reference is good to know.

@@LM-fq7in if your on Facebook why not look up my UK Bolt Airsoft owners group facebook.com/groups/2833037910080905/?ref=share

@@zombiesquadairsoft1492 Perfect just sent a request to join and thanks again for the help!

Sorry can't help with this as I have never used the discharge mode

Sorry mate couldn't comment on using 18650 batteries as I have no experience with them.

Scope is from Amazon. Cost £65. Spike Tactical 1.5-4X30BE Rifle Scope w/Tri-Illuminated Recticle & PEPR Cantilever Mount Airsoft Hunting. Very clear with good adjustment for individuals eyesight

@@zombiesquadairsoft1492 thanks

I would think the only thing stopping them coming to the US will be down to legal copyright licensing issues. Are you sure there are no US suppliers of Bolt Airsoft. I also run a Bolt Owners group on Facebook facebook.com/groups/2833037910080905/?ref=share

I'm sure we have at least one US member in the group.

@@zombiesquadairsoft1492 evoke sells bolt licensed products but they dont have this yet

Thanks for the tips but this was a mates pistol which he has already sold to finance other RIFs

@@zombiesquadairsoft1492what did he get out of interest how did you rate the ICS quality.

@@CryptoBond007 he's made several purchases. Thought the quality was very good. Quite fancied one of these myself.

@@zombiesquadairsoft1492build quality seems really smooth and it has a fixed barrel which is also good if you want to use a suppressor. a good side arm with a few tweaks definitely.

I'm from the UK mate Orange tip is an American rule.

@@zombiesquadairsoft1492 oh ok

A lot better but note after this vid I also had to replace the complete gear set as the motor pinion and bevel gear decided to self destruct. So it now has as SHS pinion gear and Modify caged gear set.

Also changed the mosfet from the Gate X-ASR to a Jefftron V2 active brake trigger contact set.

@@zombiesquadairsoft1492 hello, is it compatible with standard gears? They’re not proprietary gears?

@@NorotorFC yes they are standard gears I have now replaced mine with a set of Modify caged gears and an SHS pinion gear on the motor. Gear set uses 6mm bushings.

Louth, Lincolnshire, England. Game site is The Gaol, Oakham thegaolevents.co.uk/?domain=www.thegaolevents.com

Check this video on KZbin kzbin.info/www/bejne/nmLPc6GDm9WbY5I

@@zombiesquadairsoft1492 thank you.

Hi there, sorry its took so long to answer but all you need to do is change mode on charger to balance for best results.

Thank you.

@@TheDragonkeeper90 at least you will know how to make decent camo to prepare for the asian invasion!

Hi there, sorry my response has taken so long but I've only just found your comment. No we don't have a club it's just a few friends that try to get together for Airsoft skirmish days now and again. We are based in Louth, Lincs