11 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
Пікірлер
@bethwatters3885 18 күн бұрын
Vote blue America 💙🇺🇸
@BilqeesSamson-bk1ll 4 ай бұрын
Hey bru, am mk5 gti brakes seized up car starts well and everything but as am about hit 1st gear ad drive nothing car won't move beacuse the brakes prevent car from noving, where ti start please help
@BROOKLYNNITRO 4 ай бұрын
You can take the caliper off and see if you can unseized the brake caliber. make sure the emergency brake cable is not stuck. If that doesn’t work, then you probably have to replace the brake caliber.
@TheExplorerAlbum 5 ай бұрын
Yall know if I gotta take the fuel pump out to drop the fuel tank? Was gonna replace the tank and fuel pump as a complete unit
@huntermoody7878 Ай бұрын
Just unplug the fuel pump from top.
@gazanahmad6523 6 ай бұрын
What tool did you use to take this off ?
@BROOKLYNNITRO 6 ай бұрын
There's a certain socket for it but I didn't have it so I just used a regular wrench 🔧.
@gazanahmad6523 6 ай бұрын
Thanks, I’ve managed to take it off with an extendable wrench. Online it says 23mm is required but that didn’t even help. Appreciate the video even though I’m a few years late!
@LeviBulger 6 ай бұрын
Hey Antonio, i hope you see this and can reply quickly. I noticed you cut the part where you got the hose out of the firewall... How did you eventually remove it?! I assume it's also normal for it to be hissing air as you are pulling it out? I can't remove this damn thing and don't want to break anything else (I don't care about the hose/valve). Any help would be appreciated!
@LeviBulger 6 ай бұрын
Does it just pull out with enough force?
@BROOKLYNNITRO 6 ай бұрын
To be honest I just had to work it out it was a pain in the butt but I got it a little twist and turn and pulling and it eventually came out
@LeviBulger 6 ай бұрын
@@BROOKLYNNITRO Right on man, thank you for replying quickly. I finally got it out after working it with a panel trim tool for a bit. When it finally gave, it was like stupid easy. 😂. Appreciate the help either way, and I'm sure someone will be coming into this comment section at some point in the future with a similar issue so hopefully it'll help someone else. ✌️
@mohamedallam2252 6 ай бұрын
@ahmed zahry
@jimmckenzie8493 7 ай бұрын
Thanks for not showing how to get the switch out
@SilkRoadFamily 8 ай бұрын
Wow man! Very professionally and precise work! Especially thanks for the Part numbers … no other video showed this information
@ryanpinheiro9324 9 ай бұрын
Not to bad just did it on my 2007 eos
@likejury 10 ай бұрын
Did this solve your oil leak? And is this transmission oil or motor oil leak? Like your video. Thanks
@BROOKLYNNITRO 10 ай бұрын
It did fix my leak that is the transmission oil cooler if I can remember correctly and the engine oil cooler sit behind the bumper underneath the intake manifold
@likejury 10 ай бұрын
@@BROOKLYNNITRO Thank you. Was it engine oil or transmission oil leak?
@Luca-ob4no 5 ай бұрын
@@likejurydsg oil on the side engine oil at the front under the manifold
@singhsarabjit 10 ай бұрын
Brake Vacuum pump is not going in all the way, any suggestion? thank you
@BROOKLYNNITRO 10 ай бұрын
Make sure you grease the O-ring up a little in the keyway is lined up. A little tough
@singhsarabjit 10 ай бұрын
@@BROOKLYNNITRO Thank you brother for replying, done all that. Do you think I should clean bore with sandpaper, then clean with brake cleaner and then put some grease there so that it can slide easy? Thanks..G
@kadenk.845 10 ай бұрын
Are both o-rings the same size ?
@BROOKLYNNITRO 10 ай бұрын
I don’t remember. It’s been along time since I did it. The kit that bought came with the orings
@Luca-ob4no 5 ай бұрын
They sell it as pairs
@H.H.Tuned. 11 ай бұрын
No rtv?
@BROOKLYNNITRO 11 ай бұрын
It was done off camera. I put some in the spots that needed to be in.
@johnoverbay576 11 ай бұрын
my gti has a shuttering issues so im gonna try this and maybe the other two sensors
@johnnoe9682 Жыл бұрын
Tks
@Smashleytulsa Жыл бұрын
I love edm but god thats terrible for this video 😂
@alfonso.elboss8285 Жыл бұрын
What error do I present to you before making the change? the spark plugs came out wet
@MatewanMassacre Жыл бұрын
I can't get the gasket seal to lock back into place. It's difficult to hold the fuel pump in the tank, and lock the gasket seal into place at the same time. Of course, my gasket seal was badly rusted for some reason, and I had to hit it with some Seal Blaster, and a wire brush, to get it loose. Now, I'm having an impossible time getting it to go back into place, when my man here makes it look easy. 🤷♂
@quiles351 Жыл бұрын
It’s actually pink not purple and O/ ring get flat once you tighten them up thats there purpose and its how the seal
@tyrvv8735 Жыл бұрын
Hi what’s the item number for the top hose that connects to the exchanger?
@rommelsanchez2328 Жыл бұрын
La Marca del PCV URO biene con un defecto de fabrica
@NathanPhilps1 Жыл бұрын
Great video. About to do the same job on my GTI. Any chance you remember the torque value for those three M8 bolts?
@BROOKLYNNITRO Жыл бұрын
Thank you. I want to say 20ft lbs. I would Google it to be 100% sure.
@NathanPhilps1 Жыл бұрын
@@BROOKLYNNITROAppreciate the quick response. Been looking on google but found nothing. Likely just enough torque to press down on the 0-rings. 15-20ft lbs should be good. Thanks again...
@Luca-ob4no 5 ай бұрын
@@NathanPhilps1hey what size do i need to remove the 3 bolts ?
@aaronbarnett1782 Жыл бұрын
Did you have trouble finding correct gap I am seeing 0.026 and 0.040 which is correct?
@thiagofiladelfo7992 Жыл бұрын
How do u get that throttle body bracket off???
@kimboofdzners9574 Жыл бұрын
Another good online store is Cascade German, they sale OEM usually 10 to 20 percent cheaper than FCP or ECS. Great video, thank you!
@RV-gy2jo Жыл бұрын
Your pvc intake is in 6 mnds Dead
@marcusmorin2091 Жыл бұрын
Hi, just came across this video because my transmission cooler was leaking. Also, I change the O-rings on it it still has a leak. Did you ever find out if that was the problem with yours? Thank you.
@BROOKLYNNITRO Жыл бұрын
I just put a new cooler and Orings. That fixed my problem. Make none of the hoses are cracked.
@marcusmorin2091 Жыл бұрын
Good deal !! Mine landed up being the transmission filter leaking but I put the new oil cooler anyway..
@DoubleD8056 Жыл бұрын
@@marcusmorin2091 transmission filter?
@vrdrift240 Жыл бұрын
You can leave the headlights and crash bar attached and you don't have to take as much apart.
@vrdrift240 Жыл бұрын
Thanks for this video. I've already got mine apart to replace the a/c compressor that fell apart so I'm gonna fix that exact same leak. Glad I dont have to take off the manifold!
@adamjackson867 2 жыл бұрын
Nice work man keep up with the gti mk5 videos hope you stick with the car not much video it seems like on the mk5
@MrLakerboy824 2 жыл бұрын
Had the same problem.. i bought a new fuel pump module. Im buying the sensor and hoping that works
@DrGrnThumb 2 жыл бұрын
Let me know if it works cause I’m on the same boat. Replaced HPFP and still getting it
@stevenbarragan2007 2 жыл бұрын
How do you take off the opposite ride of the front hose?? Do you just pull the wire part? I don’t want to mess it up ha 😅
@airman64 2 жыл бұрын
I see you had to cut the manifold plastic arm.I was waiting till you got to it
@19_96tyler 2 жыл бұрын
WHAT IS THE TORQUE SPECS???
@davidbarthel9976 2 жыл бұрын
I have had leaking in that area as well even after replacing the o-rings.
@Luca-ob4no 5 ай бұрын
You will have to replace the oil cooler too
@afifhasbullah7135 4 ай бұрын
@@Luca-ob4noSo when the oil cooler starts leaking we have to change to a new oil cooler is it? Not just the o ring?
@Luca-ob4no 4 ай бұрын
@@afifhasbullah7135 i did only the orings and its still leaking fck. But my cooler seemed fine will try to order one soon
@Debo562 2 жыл бұрын
What are the torque specifications for the bolts?
@bretgtimk7968 2 жыл бұрын
on the gti when you swapped out the heat exchanger, When taking out the heat exchanger due to crushed O ring would it be better to leave the hoses in? good stuff man keep on working on cars.
@bretgtimk7968 2 жыл бұрын
When taking out the heat exchanger due to crushed O ring would it be better to leave the hoses in?
@BROOKLYNNITRO 2 жыл бұрын
If it's easier for you to leave it connected then I would. I took mine off the hoses because I had to replace the whole thing.
@bretgtimk7968 2 жыл бұрын
@@BROOKLYNNITRO i think im getting a small leak after replacing the o rings. is there a certain position or way to sit this cooler in?
@bretgtimk7968 2 жыл бұрын
it could just be my imagination however i really think it is just the oil that was left behind. it was really hard to keep attached to the hoses since it was no bending or movement. I tried to clean up as much dsg fluid as i could though. it is not as much fluid as you have puddling around. good stuff though. Definitely just take off the hoses which makes the install and o ring swap way easier.
@Luca-ob4no 5 ай бұрын
@@bretgtimk7968if u live in a very cold area the metal shrinks with intense cold and over time it causes leaks so u should replace the oil cooler too
@Luca-ob4no 5 ай бұрын
@@bretgtimk7968how much was the leak reduced after the o rings replacement ?
@bretgtimk7968 2 жыл бұрын
Is the part number for your DSG cooler O ring the same for a 2015 mk7 gti? i cant find it anywhere.
@CristianG13 2 жыл бұрын
At 18:55 what size the the 12 point screw next to the nut you forgot what size it was? I cant continue till I get the right bit for it
@Unicornmeme123 2 жыл бұрын
Nice clean engine I cant find this sensor on my BKD engine vw golf mk5 2.0 diesel
@jwilson6086 2 жыл бұрын
Great content. Appreciate the notes you put on the screen.
@jamesrichardson4036 2 жыл бұрын
Does it drain ur car battery
@BROOKLYNNITRO 2 жыл бұрын
I had no issues. Had it plugged in for about 6 months.
@briangorgoroso5753 2 жыл бұрын
Did you fix the problem ?? I have the exact issue.
@BROOKLYNNITRO 2 жыл бұрын
Yes.
@venessaanderson9243 2 жыл бұрын
Does the sealant play a good part…I see you answered the other guy…. I just want to know if you have any other problems since then
@BROOKLYNNITRO 2 жыл бұрын
Yes. That’s what they do from factory. And no issues after that everything was good to go.
@venessaanderson9243 2 жыл бұрын
Where did you get the parts
@BROOKLYNNITRO 2 жыл бұрын
I think I got the parts from partsgeek.com or carid.com.
@Rahis_0 2 жыл бұрын
I have accord 2008 and my automatic transmission is shifting rough, could this be the reason why?
@BROOKLYNNITRO 2 жыл бұрын
It could be. You can check by putting your foot on the brake, put in the car and drive tapping the gas a little bit. See how much the engine moves. If it moves too much then you know your mounts or one the mounts are no good. Also, if you can check your transmission fluid make sure it's at the right level cuz that can make it shift roughed as well.
@luckyfox_ishere 2 жыл бұрын
will it work without a sim at all?
@metalix_8657 2 жыл бұрын
Bro how did you get the bottom of the break booster hose out tho
@BROOKLYNNITRO 2 жыл бұрын
It was a tough one for me. But you gotta pull really hard and it’ll pop out. Put a little twist as you pull in and when you get it out it’s gonna release some air it scared for a sec me. so just wanna let you know that part.
@falleniris1998 Жыл бұрын
@@BROOKLYNNITRO i need to know how you got it ON. its so hard and it feels like the nipple is flexing
@BROOKLYNNITRO Жыл бұрын
What part are talking about? The booster hose
@falleniris1998 Жыл бұрын
@@BROOKLYNNITRO yes the one you take out from the brake booster I can’t get the bottom part on.
@BROOKLYNNITRO Жыл бұрын
@@falleniris1998 I put a little oil around it. It took a little force but it went on.
@leeroyakaelroonio3626 2 жыл бұрын
Hey bro so were you having brake issues? Or what kind of issues were you having
@BROOKLYNNITRO 2 жыл бұрын
Vacuum pump was leaking and the hose was old and cracking.
@leeroyakaelroonio3626 2 жыл бұрын
@@BROOKLYNNITRO no brake issues? I recently replaced my seals on the pump and my brake pedal gets hard at idle. But once i give it some gas it softens up. Any suggestions on what i can do?
@BROOKLYNNITRO 2 жыл бұрын
I didn't have any brake issues. Check all your vacuum hoses that come off the vacuum pump. If all of those are in good shape. I would get my brake booster checked out.
@leeroyakaelroonio3626 2 жыл бұрын
@@BROOKLYNNITRO thanks for the help brotha ill go ahead and do that and im also gonna show love and sub 👍🏼
@HM.Hatchet205 2 жыл бұрын
Mine goes hard at idel aswel hopeing its just a leak to