REPLACING VACUUM PUMP AND BRAKE BOOSTER HOSE ON MY 2006 VW MK5 GTI..!

[@BilqeesSamson-bk1ll]

Hey bru, am mk5 gti brakes seized up car starts well and everything but as am about hit 1st gear ad drive nothing car won't move beacuse the brakes prevent car from noving, where ti start please help

[@BROOKLYNNITRO]

You can take the caliper off and see if you can unseized the brake caliber. make sure the emergency brake cable is not stuck. If that doesn’t work, then you probably have to replace the brake caliber.

[@LeviBulger]

Hey Antonio, i hope you see this and can reply quickly. I noticed you cut the part where you got the hose out of the firewall... How did you eventually remove it?! I assume it's also normal for it to be hissing air as you are pulling it out? I can't remove this damn thing and don't want to break anything else (I don't care about the hose/valve). Any help would be appreciated!

[@LeviBulger]

Does it just pull out with enough force?

[@BROOKLYNNITRO]

To be honest I just had to work it out it was a pain in the butt but I got it a little twist and turn and pulling and it eventually came out

[@LeviBulger]

@@BROOKLYNNITRO Right on man, thank you for replying quickly. I finally got it out after working it with a panel trim tool for a bit. When it finally gave, it was like stupid easy. 😂. Appreciate the help either way, and I'm sure someone will be coming into this comment section at some point in the future with a similar issue so hopefully it'll help someone else. ✌️

[@GangStar_6]

I got my 07 MK5 GTI throwing a P0171 and P0507. I replaced my break booster vacuum lines as they were cracked to hell. In the process broke my coolant diverter valve so new now. Lol Problem is the P0171 is still coming on. Sometimes while driving in first or second gear to rpms pump up to 3~4K and while driving I get a hesitation in acceleration. Plus when put a full tank of gas and smash down the road my oil pressure goes to zero.

[@BROOKLYNNITRO]

That code is a pain in the butt. Somewhere along the line you still have a vacuum leak. I'm having a similar issue but my code is p2178. I did everything that I can do to fix it and it is still popping up.

[@orlandoplass2]

If it’s hesitating you probably need to change spark plug and coil

[@jcool2892]

Same crap to my 08 GTI, throwing P0171 & P0642. Will try to check the brake hose, also the same as yours got heitation & jerking sometimes. I Will also try to change sparkies and coils ( Audi R8 & NGK Iridium 7)

[@younggodz4104]

Same issue P0171 . Smoke test shows leak in the vacuum hose

[@xi.Tactix]

I had P0171 in my MK5 & some random misfire code. Replaced Pcv and bam fixed, smoked the system found small leaks and those were fixed and last thing I could think was a valve in PCV stuck open surely enough that was it

[@singhsarabjit]

Brake Vacuum pump is not going in all the way, any suggestion? thank you

[@BROOKLYNNITRO]

Make sure you grease the O-ring up a little in the keyway is lined up. A little tough

[@singhsarabjit]

@@BROOKLYNNITRO Thank you brother for replying, done all that. Do you think I should clean bore with sandpaper, then clean with brake cleaner and then put some grease there so that it can slide easy? Thanks..G

[@metalix_8657]

Bro how did you get the bottom of the break booster hose out tho

[@BROOKLYNNITRO]

It was a tough one for me. But you gotta pull really hard and it’ll pop out. Put a little twist as you pull in and when you get it out it’s gonna release some air it scared for a sec me. so just wanna let you know that part.

[@falleniris1998]

@@BROOKLYNNITRO i need to know how you got it ON. its so hard and it feels like the nipple is flexing

[@BROOKLYNNITRO]

What part are talking about? The booster hose

[@falleniris1998]

@@BROOKLYNNITRO yes the one you take out from the brake booster I can’t get the bottom part on.

[@BROOKLYNNITRO]

@@falleniris1998 I put a little oil around it. It took a little force but it went on.

[@breashea]

So while changing my time chain and tensioner I some how broke the plastic piece the is at the one end of the brake booster vacuum line that’s underneath those hoses do you happen to know where I can find that piece?

[@BROOKLYNNITRO]

You can try fcpeuro.com or urotuning.com.

[@leeroyakaelroonio3626]

Hey bro so were you having brake issues? Or what kind of issues were you having

[@BROOKLYNNITRO]

Vacuum pump was leaking and the hose was old and cracking.

[@leeroyakaelroonio3626]

@@BROOKLYNNITRO no brake issues? I recently replaced my seals on the pump and my brake pedal gets hard at idle. But once i give it some gas it softens up. Any suggestions on what i can do?

[@BROOKLYNNITRO]

I didn't have any brake issues. Check all your vacuum hoses that come off the vacuum pump. If all of those are in good shape. I would get my brake booster checked out.

[@leeroyakaelroonio3626]

@@BROOKLYNNITRO thanks for the help brotha ill go ahead and do that and im also gonna show love and sub 👍🏼

[@HM.Hatchet205]

Mine goes hard at idel aswel hopeing its just a leak to

[@CR15PY1]

Can I have the link for the rear vacuum hose?

[@BROOKLYNNITRO]

www.ebay.com/itm/Kayser-Brake-Booster-Hose-1K0612041KC-/232755910183?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

[@jasonhazelwood9383]

I think that this is the part that I see leaking oil on my FSI turbo engine. Thought about changing my brake booster line also. Have a nagging vacuum leak code popping up all the time. Wondering if the vacuum pump could be causing the code? Hmmm... Great video.

[@BROOKLYNNITRO]

Thanks. What code is popping up?

[@jasonhazelwood9383]

P0171

[@connorstarowesky7812]

@@jasonhazelwood9383 did replacing the brake booster line help your code?

[@BROOKLYNNITRO]

What code are you getting? Changing my brake booster line did not fix the code. My diverter valve was broken.

[@connorstarowesky7812]

@@BROOKLYNNITRO P0171 and P0507 (Revs too high at idle)... I found a puncture in the brake booster line and hopefully its the vacuum leak that is causing the codes

[@한준희-h1l5n]

Mate how was Pierburg parts going? Is that working great?

[@BROOKLYNNITRO]

Working great 👍

[@한준희-h1l5n]

@@BROOKLYNNITRO where did you get that part?

[@BROOKLYNNITRO]

fcpeuro.com and other sites I also use is ecstuning.com and urotuning.com.

[@한준희-h1l5n]

Cheers mate

[@prudentjb]

Nice weather dude