Tube Socks Malone

Пікірлер

@thegixxxerway 4 күн бұрын

I’ve tried the dark and it does look cool but I prefer clear .

@LennyNaicker-b5n 7 күн бұрын

Brilliant 3 part video. As a beginner biker, you made 8t super easy to follow and understand. 🙏🙏 Awesome

@Rowhedge 7 күн бұрын

Thanks very much for this. I had the same problem as you -- a break in the power to the relay...turned out to be a corroded connection on the lead that comes from the battery to the small in-line yellow 20a fuse. Have to remove it to check. Very helpful diagnostic video though, wouldn't have found the problem without it....cheers!

@TubeSocksMalone 4 күн бұрын

@@Rowhedge I’m happy it helped troubleshoot your problem.

@DjdnsnSnyder 11 күн бұрын

Will these make a fuel pump turn off?

@BigDogHDSPB 12 күн бұрын

190/55 👍 190/50 better for drag racing.

@jbath39 24 күн бұрын

Side fairings have to come off to take out the left and right side screws for the tank cover

@juliocampos1116 Ай бұрын

Duuuuud, let me know where you f$king live to buy you a beer, you just saved my life thanks

@davidschutte9167 Ай бұрын

Even tip de zei kant van de ketting hoeft niet wit te zijn! Dus kun je er gewoon af halen voor mensen die wit niks aan vinden

@fonta1009 Ай бұрын

6 years later sup G

@coltonkent4392 Ай бұрын

My ECU plug A doesn’t have a pin in it?😂

@humannature3916 2 ай бұрын

Have you seen 110 - 115 temps?

@KendricRomero-f8i 2 ай бұрын

Dam bro thank you very much 🤘

@hexyrexy 3 ай бұрын

I tested my bank angle sensor and when I tested the red/white wire with the green wire, it read close to the battery voltage. Any chance anyone knows what that means? When I tested the white/black wire with the green wire it read close to the battery voltage as well.

@fordtough83 3 ай бұрын

i know this an old video but i'll try anyways. if i get 12 v on both the wires on B.A.S. what next

@NewtPK 3 ай бұрын

Planning on doing this ride this weekend.

@dtogo4286 3 ай бұрын

How did you get the lube off the rim?

@SocialVoiceApps 4 ай бұрын

190 seems safer for daily riding .. am I wrong ?

@chezrejacobs 4 ай бұрын

what if you don't get connection on pin 4 and 18 on the black connector?

@alexyogi8 4 ай бұрын

I use MOTUL lubricant but it always end up with oil splatters on my clothes and the seat!

@DH-zj9jb 4 ай бұрын

Thanks bro. Helped

@chezrejacobs 4 ай бұрын

my bike still not running after watching all three videos

@laservlx 4 ай бұрын

Its pronounced " Mo Tool" Belray superclean still flings off. Until they banned it in Canada i use belray super clean religiously and i still had to clean my wheels once a week .

@MathewGaray 4 ай бұрын

Lmao “I could literally do this in 5 mins if I wasn’t dicking with the fucking camera” lmao

@cheny6489 4 ай бұрын

use C3 not C2

@comonerleon 4 ай бұрын

Can you adjust the foldability in it. I don’t want them folding easily

@TubeSocksMalone 4 ай бұрын

Just tighten the screws more and it will become more difficult to fold. Honestly though they don’t fold super easy so they won’t just flip up by accident. Never happened to me. Maybe if they were some Chinese brand or some but these are solid.

@comonerleon 4 ай бұрын

@@TubeSocksMalone Mike my man appreciate the reply. Perhaps I read too much into the potential dangers. I just ordered the same ones diff color for my R1M. I ride too aggressively and race too much for it to potential flip up. Do you reckon if I really tighten them up they couldn’t be forced to fold by normal pressure only thru excessive force?

@TubeSocksMalone 4 ай бұрын

@comonerleon I would say yes to if you tighten them enough they would only fold with excessive force. At the very least to the point you would feel comfortable it would definitely not be accidentally flipped up without purposely doing it or sliding. Keep tightening until you feel you like it. I tighten mine enough that it almost didn’t move so I loaned it just a tad. I also took them apart and added blue lock tight on and just make sure it’s all good. I think it’s good practice to double check all. Never know if it was made on a Friday 😂. Like the old saying goes never buy something made on a Friday or a Monday.

@davidsamano6303 5 ай бұрын

What if I have no volts going to my starter?

@davidsamano6303 5 ай бұрын

I am not getting power from my solenoid to the starter, would that cause my cluster to not get any power as well?

@jordanhardy3515 5 ай бұрын

"For safety" yea right, I bought it because it looks bad ass😂

@Just.Mig33 5 ай бұрын

Car , bike, any vehicle don’t tailgate . At least 6 ft

@renata13-13 5 ай бұрын

Thanks for sharing…I haven’t started my bike in almost 3 years. I am going to take mine off & clean it out.

@seahawksforever9504 5 ай бұрын

Great simple video to learn. Thanks.

@BSABD315 5 ай бұрын

cant find it on my cbr 125 2008

@johnnychavarria5318 6 ай бұрын

The two plugs on the clutch switch does it matter which plug goes on each prong

@texasblake115 6 ай бұрын

Hell yeah good video

@lukebond431 6 ай бұрын

I have a 190 on my cbr but I also have a different tires with different tred on the front I get a wobble feeling at high speed. Could it be down to tires or somthing else?

@TubeSocksMalone 6 ай бұрын

The front tire probably needs to be rebalanced. Good chance anyway if you’re get a wobble at high speed or wheel bearings

@itsaliviahere8229 7 ай бұрын

I know this is old but thank you!!! 🙏🙏 so helpful

@TubeSocksMalone 7 ай бұрын

Glad it could help

@hurricanej1240 7 ай бұрын

Can I put a 190/55 on a mt07 Yamaha ?

@timstuder4533 7 ай бұрын

Great video!

@-M-power 7 ай бұрын

What mode is the best and give more power to bike R or S ?

@TubeSocksMalone 7 ай бұрын

Each mode has the same power BUT what it does is massively reduce engine braking. Race mode has very minimal engine braking so when you roll of the throttle like a normal motorcycle the engine starts to slow the bike down. In race mode on the Aprilia it does not so you don’t lose power or speed while rolling off the throttle and you would use brakes more like in a race. Track mode has slightly more engine braking and S is street mode it has normal engine braking.

@-M-power 7 ай бұрын

@@TubeSocksMalone thank you so much for quick response.

@Charlie-gt1ru 7 ай бұрын

Thank you man

@drifterxl12 7 ай бұрын

Awesome thanks

@kadrisadiku2846 7 ай бұрын

life saver

@danielstorey3696 8 ай бұрын

I'm having the exact same problem. This stuff is terrible and flings off all into my mudguard and front sprocket area. It also dissolved the pre-existing lube inside the links and made a huge mess of my wheel.

@movingtarget4784 8 ай бұрын

looks amazing even in daylight!

@TheEminemRecovery 8 ай бұрын

How do I put it back on?! the gas tank under the tankfairings won’t fit properly

@carlosliranzo4706 8 ай бұрын

Awesome video man super straight forward, subscribed

@mr.tarkovish2587 8 ай бұрын

I see another Merkules fan😏

@Ro20_ 9 ай бұрын

That looks badass. I bought the green ones for my ninja so i can have them ready for summer

@trsskater 9 ай бұрын

You must not have used a textile jacket that has holes in it if you say perf learher flows more air. My Icon Contra 2 jacket is almost like not wearing a jacket because mesh flows just so much air. In Virginia it gets too hot to wear leather in the summer because the sun will fry you even when moving. Its so hot even in mesh with highway riding i will still will be sweaty when I get to my destination. It doesnt have rhe same level of slide protection as leather but from other people who have crashed if don't buy a cheap textile jacket you won't get road rash. The jacket will be done but it does its job. The people with road rash has an urban city level low speed jacket and then went down at at 50mph and wonder why it shreaded. If you are doing higher speeds you need more than 450D fabric for a slide.

@ronenbenaaron2661 9 ай бұрын

debating between: bridgestone s23, PIRELLI ANGEL GT2 TIRES, PIRELLI DIABLO ROSSO IV TIRES which you from you think is best ? or better to be with bridgestone s21 (Aprilia rsv4 rf currently have Q4 was using it only for the track, now on the street)

Ең жақсы KZbin

Пікірлер