Great info Dave, wish I would’ve watched this sooner, perhaps my center serving would still be intact. Nonetheless, the new string will be here soon and I’ll will get to refetching and knocking my practice Center point HPX shafts.
@1951pointer15 күн бұрын
You need to be a f....xx rocket scientist to operate that Acuslide.....
@jojogrow58156 күн бұрын
is there anything i can do to fix that clicking noise because it happens everytime i decock
@jojogrow58157 күн бұрын
also i’m confused you said after cocking let back twice then once with the gear stop but on my 425 siege a sticker says “ backed d handle once and then hood gear stop and manually rotate silver knob backward until it stops
@WyvernsCreations7 күн бұрын
@@jojogrow5815 this year they went to a different series of instructions in an attempt to get people to stop over back cranking. As noted on that brake most times two turns back is all you need to do
@jojogrow58157 күн бұрын
my crossbow just started doing that bumping noise like you showed how do i fix it
@harveyrousejr.20699 күн бұрын
Excellent review! Makes a man want to spend some money on the latest and greatest. I've never weighted my Assassin 360, however, 9.97 lbs. sound pretty light. I would bet mine weights more than that.
@harveyrousejr.20699 күн бұрын
I purchased my first Excalibur from Wyvern's back in 2018. I purchased the Assassin 360 and it has been a solid bow with zero issues. I saddle hunt and it has proven to be rugged. I pulled it from the case prior to NC bow season a couple weeks back and could still drives tacks with broad heads. Can't say enough good about Excalibur.
@matthewengland762311 күн бұрын
Hey thanks for this info I have a Ten Point Wicked Ridge Raider 400 With cock and de-cock I have shot this crossbow around 40-60 shots and I can see orange bow string thru the black severing I was going to contact Ten Point but I guess this isn't necessary thanks for your Expert advice MattBoB NH Hunter
@NPDESstormwatertraining17 күн бұрын
I have the 10 point siege for 25, it doesn’t have the pin in the crank handle to disengage the front string which makes the brush extend beyond the end. How can I disengage it?
@WyvernsCreations17 күн бұрын
That one you can’t. It has a different dfi system
@NPDESstormwatertraining16 күн бұрын
So what you’re saying is that it doesn’t disengage at all. If that’s the case, can I put a slight tension on it to put the brush back behind the front so it doesn’t get damaged?
@WyvernsCreations15 күн бұрын
yes just don’t go too far
@NPDESstormwatertraining15 күн бұрын
Thanks!
@stevenhicks81518 күн бұрын
Is this the same way to lube cables strings and servings on the swatx1 also?
@BillSmith-u7u19 күн бұрын
For those people trying to do this. Watch the video, when David turns the compressed air can upside down that is the key to the issue. That when your nock becomes freezing cold. Pause for 30 seconds letting the nock becoming even colder, then use the hammer. And yes the 1/8" rod works and you can get it through the bolt. I did 6 in 3 minutes once I when back to watch the video again.
@donjaun142323 күн бұрын
I tried it. So stiff to turn I thought I’d break the shaft. But I did it.. then I still couldn’t turn it off . Used pliers and it broke. Now my I can’t use an expensive arrow either. Once you put them in you can’t get them out. These things suck!! I will never buy another ravin because they are greedy and there proprietary arrows suck too. If you’re lucky 5 arrows out of 12 will fly thesame.
@Robert-n4p1g25 күн бұрын
Great video sir
@zzz7zzz927 күн бұрын
But it can't affect flight at shorter distances. I'm shooting regular montecs on my crossbow bolts, and they are literally hitting the same hole as my field points at 20 and 30 yards. I'm not taking further shots, so i can't ask for better performance than that.
@bjjbrawler1Ай бұрын
Bad ass bow! Gotta say that internal crank is pretty cool... love that camo too.
@tomgriffin3800Ай бұрын
Will it be on Xbox also?
@HarveyHostetlerАй бұрын
Great video I just bought a viper 430 I have about 70 shots in it. Then I started noticing the string separating a little bit. It had me very nervous but this explains why it’s doing that. I definitely have a peace of mind now.
@HarveyHostetlerАй бұрын
Great video I just bought a viper 430 I have about 70 shots in it. Then I started noticing the string separating a little bit. It had me very nervous but this explains why it’s doing that. I definitely have a peace of mind now.
@HarveyHostetlerАй бұрын
Great video I just bought a viper 430 I have about 70 shots in it. Then I started noticing the string separating a little bit. It had me very nervous but this explains why it’s doing that. I definitely have a peace of mind now.
@kenreiner259Ай бұрын
Good work Dave. You da man !!!
@chefswild8870Ай бұрын
Don't I wish they just lay down like that in real life when I make a heart or double lung shot with my crossbow. 😆 Gotta spine them if you want the result we're seeing in this game. Still looks pretty cool to play!
@davidwilkins5198Ай бұрын
we had some limitations...we did do a blood trail deal but it opened up a can of worms and we wanted to make the game free...
@JerrezАй бұрын
Ill gladly buy if you add the stryker crossbow
@davidwilkins5198Ай бұрын
it will be a free game
@BlowingDummy-s9sАй бұрын
Martin Kimberly Thomas Shirley Harris Michelle
@cosmiccragsman1Ай бұрын
Me WANTS!
@davidwilkins5198Ай бұрын
another week or so and it will be available to download
@kylegandy3125Ай бұрын
Thanks for the tip!! Just had new strings put on from factory it came back in locked position. Was stumped for an hr until I found your video!!! Thanks again
@toninigАй бұрын
Will the high rings work with Excalibur scope
@WyvernsCreationsАй бұрын
We include tall rings with the revx
@toninigАй бұрын
@@WyvernsCreationsdo you sell them
@boomerrangerronАй бұрын
Nicely done video! And a fair assessment of TENPOINT's newest introductions. I'm more impressed with their second-tier line, or the WICKED RIDGE offerings. I'm currently shooting the M-370 which took five deer last season. I'm looking seriously now at both the Wicked Ridge VIPER S415 and also their newest reverse draw option as well. Might wait till next year as they introduce more new technology and drop the price on the existing models. We shall see. Wish I lived closer to your shop!
@M1keG23Ай бұрын
Just curious what my wicked ridge Blackhawk 360 would prefer bolt wise, right now I’m using the aluminum xx75 bolts but want to upgrade to premium carbons, specifically woven carbon shafts, so are the evo x center punch a good choice? I see your prices on your website are great for them
@WyvernsCreationsАй бұрын
That or our dragon claws
@linescum444Ай бұрын
Excaliber matrix 380fps is a beast ,no crank still simple ???
@luislorenzo7168Ай бұрын
Thanks so much for your help
@quintonstone7324Ай бұрын
I have been trying to find out if I am to wax the serving where it rides over the rail or use lube on my flatline 460. I think you answered that question. Was looking for a bit more information on the exact wax and lube spots but still good info.
@WyvernsCreationsАй бұрын
Here you go. kzbin.info/www/bejne/r6i6fmiXbZiiiqssi=UiuOiVMfy6V21GCm
@anthonywells733Ай бұрын
Can I use string snot on crossbow string and cable
@WyvernsCreationsАй бұрын
Yes but scorpion venom is cl Anne and easier
@tahoe829Ай бұрын
Badass game
@davidwilkins5198Ай бұрын
almost done with it!
@quintonstone7324Ай бұрын
Just bought the Flatline 460. Have not installed the Burris scope that came with it yet. Would it be wise for me to pull those two bolts and use blue loctite on them and tighten them down? if so will i need this in a bow press if I remove those bolts?
@WyvernsCreationsАй бұрын
Just give them a snug. Don’t need to remove or a press
@jimcarriekarker8399Ай бұрын
Grat informtion and I appreciate your honesty.
@jimidavis6796Ай бұрын
Thank you. There is absolutely no literature shipped with the 505 to explain this
@paul2532Ай бұрын
Do you still service scorpyd crossbows i need my string and cables changed.
@WyvernsCreationsАй бұрын
We do but we are screaming busy. Give us a call and we can get you in
@JohnEckenrode-o2g2 ай бұрын
What did your Matrix bow weigh when ready to hunt?
@squirreljumper1202 ай бұрын
Awesome guy bought my 29x from him!!!!!!
@johannaltmann37622 ай бұрын
Blabla
@gaelewis66233 ай бұрын
What's the name of both Cross bows?
@ronaldcagle80943 ай бұрын
I’m looking at either the venom x or the turbo s1 which do you all recommend?
@WyvernsCreations3 ай бұрын
The turbo is narrower and more tunable but more money. Can’t go wrong it’s a trade off. Both are great bows
@christopherworkman61433 ай бұрын
I have a problem with both my crossbow and my two rifles. Even if I bring the crossbow/rifle up to my eye, I have to tilt my head to about a 40° angle to look through the scope. Does this affect accuracy?
@WyvernsCreations3 ай бұрын
It can. Your generally not comfortable in that position you may want to try taller scope rings
@frankgalati27493 ай бұрын
Is that❤❤😮 23:13 what you got me for my Christmas birthday Easter Halloween your birthday and all the other holidays it's really nice one thank you for the video and sharing
@RobertWilliams-um8cv3 ай бұрын
Very useful info, thanks. I have been looking for a scope upgrade for my X bows.
@davidjames73823 ай бұрын
Dave is great. Bought my first Tenpoint from him years ago. Sold that one..and was able to pick up a TP FX4. Bought a Zeiss XB75 ( when they were out for crossbows) from Dave. Great shipping and fast service.
@charlesbeaver56653 ай бұрын
So if the Rhino nock is used then why do you need the arrow retention spring? They should’ve stayed with the Guardian system…Excalibur dropped the ball here. What’s the actual draw weight of the limbs…300 ish pounds?
@frankgalati27493 ай бұрын
It mentioned that it was a 400 so I'm thinking it is 400
@wesmonahan84884 ай бұрын
I’ve been looking on your website I have mag 340 I like 400 grain finish weight what arrows would you recommend I order from you I’d like to get about 2 dozen
@WyvernsCreations4 ай бұрын
Go with our dragon claws they weigh 400grns with a 100 grn tip
@wesmonahan84884 ай бұрын
@@WyvernsCreations for the 16 1/2 inch quills?
@WyvernsCreations4 ай бұрын
No. 16.5” dragon claws. Look on the site under Excalibur accessories at the wyvern custom Excalibur arrows wyverncreations.com/excalibur-accessories/custom-premium-excalibur-arrows/
@wesmonahan84884 ай бұрын
@@WyvernsCreations and holy shit I wish I’d had ordered a wyverized mag 340 from you for that price 🤦🏼 either way i normally make my own arrows just don’t have the time and can’t handle the anxiety of it anymore I had some maxima hunter reds cut and some half inch long victory inserts and a grim reaper mini mag getting pass throughs on michigan bucks at 50 yards with that set up total weight about 411 grains but not really proper set up for bow broadheads stick out way past stirrup so have to pay attention not to bump and not proper knock had string go underneath last arrows sent and tear vein off still killed the buck though only went 22 yards I ranged him from tree so looking for proper fitting upgrade
@wesmonahan84884 ай бұрын
@@WyvernsCreations just question if I use lighted knocks will that bump me up to 425 ish or should I go gold tip swift to stay around 400 with lighted knocks?
@Greenkabin4 ай бұрын
I have the tenpoint havoc rs440 and some how the left trigger release pin fell off gone. I'm not sure where it came off, and I'm not sure how it came off. Where can I find one. Also, can the bow still work after getting wet in the rain. One day, my bow got wet, and when I attempted to de-cock and it make lots cranking noise, any explanation is appreciated
@WyvernsCreations4 ай бұрын
Ya…that is all one piece. You will want a service center to replace that for you they won’t sell just the part. There is a bushing that is probably gummed up from being wet. Same deal a service center can pop out the crank and clean the bushing for you