Accuracy Issues with TenPoint Reverse Limb Bows

Here is a way you can fix some of your accuracy issues with TenPoint reverse limb crossbows. This includes such bows as the Siege, Havoc, Flatline or Nitro. You don't need a bow press to fix this issue.

[@vanhaus5022]

The master at work, Dave knows more about this stuff then the manufacturer…haha

[@johnwilliams5120]

Great Information. Very helpful. Thank you for sharing. This is something I will surely keep an eye on.

[@briansupermag3918]

Wow now that is great information. Thank you Wyvern

[@mblakey4736]

Great informative channel! I just ordered some arrows (aka bolts) for my Viper S400 off the website. Prices were considerably lower than ordering from TenPoint and my order was shipped the same day! Thanks for all you do!

[@boomerrangerron]

Great tip, and seems a good reason to stay with their standard configuration bows, and maybe under the 400 FPS level with their Titan M-1 or second label Wicked Ridge M-370.

[@chickimac1]

Like my Scorpyd I got from you. Very good accurate shooting bow

[@slayerarrow]

Great guy and greats service , you can tell you are talking with a pro when you call him.

[@TODinWY]

Great Info! Thanks!

[@TranquilityAcres]

Thanks for the heads-up

[@BestICan]

Should the rail/riser bolts be tightened without string tension? Being under full tension kept the limbs in a particular position that was changed as soon as tension was relieved.

[@wyvern360adventures7]

you can do it while under tension...I just did it in the press to show you the amount of motion those loose bolts can cause

[@jasonmhanes1]

​@@wyvern360adventures7 thanks for this video- I am going to check my siege !

[@mkaz3997]

That could save a helluva lot of headache down the line! Thank you sir! I'm guessing it's the same principal on the Nitro 505?

[@wyvern360adventures7]

yep...any of the reverse limb bows

[@Vuhjayjay68]

PS thanks for any help

[@moondog3901]

Tighten with tension on the limbs? Can alignment be checked after it is secured? Also should these be tightened to a specific torque?

[@WyvernsCreations]

Yes you can tighten them with tension I did it in the press to show they were loose. They are conical they self align. Good and tight. Not sure what the physical torque is

[@cheachyang3502]

hi what the limp length??

[@Vuhjayjay68]

What would cause my havoc rs440 to keep shooting to the right Ten point replaced the scope twice and the two bolts are tight I just checked them I can sight this thing in at 20yrds and I won’t get 15 shots out of it before it starts shooting to the right again so I’ll adjust the scope back to the left about 23 clicks and shoot dead on then without saying it BOOM It’s shooting to the right again

[@WyvernsCreations]

Your scope rail is probably not straight down the rail. If it’s offset enough you will crank the scope far enough that it won’t hold the adjustment. Look down the rail and line the rail against the scope rail and see if it’s offset. If it is you can pop off the stock loosen the bolts to the scope rail readjust it and re tighten it

[@josephallen2755]

Do you have a video of a string replacement of Wicked Ridge fury 410 or a reverse limb string replacement

[@WyvernsCreations]

Sorry we don’t. You need a press It’s basically like every other bow you just do it upside down

[@snowprince5232]

Another Question; will any brand of bow press work for tenpoint reverse draws? Or do they need a specific press provided by tenpoint?

[@WyvernsCreations]

TenPoint does not make a press. The last chance with the narrow adapter works great

[@craftsman2533]

nice its not necessary to press it first before tightening right?

[@wyvern360adventures7]

correct, you can just tighten them up without a press

[@adaleparker1956]

Is this true of the scorpyd reverse bow. I've never seen an accuracy issue mine. It's a tack driver!

[@WyvernsCreations]

Bolts loosen on every crossbow. Worth checking them now and then

[@Nate1776_]

What bow press is in the video? Will it work with flatline 460? Thanks.

[@WyvernsCreations]

Last chance ez press with the narrow bow adapter and yes it works well

[@Nate1776_]

@WyvernsCreations alright thanks. I would image you guys sells the press?

[@WyvernsCreations]

Yes we do

[@davidedwards5372]

Great info. Thanks!