See My Cape Productions

Пікірлер

@davidciminosrhythmkitchen8592 6 күн бұрын

Cool man

@seemycapeproductions7833 5 күн бұрын

@@davidciminosrhythmkitchen8592 Thanks Broman! Thought you might be interested.

@bersisasiyoum 14 күн бұрын

Best

@NancyStewart-d7x 18 күн бұрын

Martin George Robinson John Johnson Melissa

@BigBigNRGY Ай бұрын

Afraid to talk?

@seemycapeproductions7833 Ай бұрын

@@BigBigNRGY lol, no need to talk. It’s a simple demo.

@DivinoOdin 2 ай бұрын

Please where can I get the driver for this tablet, the drivers on the site is recognizing my tablet

@williehazel7284 2 ай бұрын

Sorry guys but the vevor machine I bought is a total piece of crap! Heat temperature was going all over the place and not constant at all. Ruined several hats before I checked the temperature with a temp gun. Temp would rise and fall by 35 to 40 degrees the whole time it was on. I was not aware of it until I ruined a few hats. Tech support said that was normal. That was my answer and solution. Awful way to lose money. Threw it in the trash. They would not honor my warranty. Done. Best be careful when buying this machine or at least check it out before your 30 days runs out.

@Quincyzmusic1 2 ай бұрын

Yeah, it can be a bit of a crapshoot when buying heat presses that are lower in cost. The only way around it is to buy the more expensive models from places like Pro World. This model in in the video has worked well for me. I’ve used it for hats and other small areas on shirt pockets and and stuff. However, I purchased mine from amazon and the first one had a faulty control unit. I actually contacted the manufacturer, not amazon. They sent me a brand new one and it’s been great! Sorry for your experience.

@JessicaMelcher-t7h 3 ай бұрын

How do you not get a crease near the sewing of the 6 panel hat? Everytime I get a crease no matter how much cushion I add.

@Quincyzmusic1 3 ай бұрын

Hello, have you tried decreasing the amount of pressure using the tension adjustment on the top plate? A lot of of experimentation unfortunately . I use a silicone sheet and also a pose of thin cardboard has been helpful to me. Good luck.

@kbh4bratz 4 ай бұрын

Does the crease go away

@jpdudadashow 4 ай бұрын

Do you always use it? How many hat did you press approximatly?

@seemycapeproductions7833 4 ай бұрын

I use it quite frequently. Mostly for hats but I also use in to apply patches to small items like cross body bags and more. I would say I have made at least 100 or more items with this press so far.

@jpdudadashow 4 ай бұрын

I just buy one, i don't wait for the delevery. Thank you for your answer and sorry for the bad english. I'm french.

@seemycapeproductions7833 4 ай бұрын

You are welcome! I hope you have great success with your press!

@davidciminosrhythmkitchen8592 5 ай бұрын

Cimino Like the Q BOX

@othinus 5 ай бұрын

greetings from the Philippines. thank you for the demo. have you tried using a condenser microphone with the pedal? it has built-in phantom power.

@seemycapeproductions7833 5 ай бұрын

Hello! You are welcome. I have not tried using a condenser microphone yet, but it’s a good idea! My guess would be that as long as the microphone has its own phantom power that it would work just the same.

@BrendaDavis-1963 5 ай бұрын

What do you use to build it because when I press leave dents

@seemycapeproductions7833 5 ай бұрын

I use a teflon sheet. If that does not help, try reducing the amount of pressure on the press by loosening the tension knob on top. I have also used a small piece of thin card stock. I hope this helps.

@ElaniePadilla 6 ай бұрын

Hi I know it's been years since this video but di you have a video showing how to change it from Celsius to Fahrenheit ? Thank u

@seemycapeproductions7833 6 ай бұрын

Absolutely, I just made a quick video for you : kzbin.infomhDz-R9CArI?si=HvlXBnioUAxX9NB5

@ravenousone3012 7 ай бұрын

Mines not programming with the DMx controller and it only has 2 functions. Buyer beware

@Quincyzmusic1 7 ай бұрын

Sorry about your troubles. Yeah, sometimes you get what you pay for unfortunately. Mine worked fine and was able to control them with my Chauvet Obey 40. Better lights of course will get better results,

@jackTR11 7 ай бұрын

Same for me. Bought 2. They never worked with my Obey40 on DMX mode. Waiste of money

@Northwarriorcustoms 8 ай бұрын

Would this heat work just as well with leather patches?

@seemycapeproductions7833 8 ай бұрын

I don’t see why not. A leather appliqué should work the same. This press has adjustable heat and pressure adjustment so…. I think it would work well. ( disclaimer)- I am not affiliated with the manufacturer or distributor’s of this press. I am a consumer who just uses this press.

@Dorrito83 8 ай бұрын

I gotta say, I ordered the baritone version of this uke last year and I have no issues like what you're experiencing. I love this thing, sounds great frets are NOT sharp whatsoever, preamp works great. Granted I ordered this directly from the Kala website, the majority of my ukes are kala and I love them. Its unfortunate this was your first uke experience.

@gabekarp3008 9 ай бұрын

Thanks for the review. Sorry to hear there were so many issues but some of them you’ve addressed. I was surprised it.cost $139, Kala makes some costlier instruments that look pretty good. The unbalanced signal between strings is a headscratcher. Is it an under saddle pickup or just a poorly-placed contact mic? Good luck.

@seemycapeproductions7833 9 ай бұрын

Thanks for the comment. I am not sure where the pickup is actually located. I am gonna have to dig in a bit to see. Thanks again for watching the review.

@andretoyo 9 ай бұрын

Im not sure but ‘ve felt the version 1 had a warmer sound and the reverb was better too. Im not sure if 12v or 9v there’s something about it. Of couse the v2 with the auto gain it helps a lot. Great demo as well.

@stefaniecolapinto 9 ай бұрын

Whoops I júst bought this tenor five minutes ago 😂 I hope I get a good one ‘cause I’m a complete noob, I’m not filing down stuff…😅 but I’m glad to hear the company does reply and works with their customers

@seemycapeproductions7833 9 ай бұрын

Hey thanks for checking out my review. I really hated to have to make a negative review about this one. I had heard good things. It could be that I just go one with issues that slipped through the process. Sweetwater and Kayla both offered to take it back. My biggest issue is the pickup not functioning properly. Still haven’t get that repaired. Good luck with yours. If you think about it, come back and let me know how it turns out for you. Thanks again for taking time to watch and comment.

@BaritoneUkeBeast4Life 9 ай бұрын

Hi very good review. I sympathize and understand your pain with regards to the poor setup. I have received a few stinkers myself in the last 6 months that I have been playing the Ukulele. The commenter before me has brought up most of the same points I was going to tell you. I have learned not to buy uke's from Amazon, Guitar Center, or even Sweetwater. Sweetwater is awesome if your buying a guitar and it is priced $399 or higher as they will then give you their free 55 point inspection. I know that Kala offers a similar free inspection if you purchase from them directly. I am very surprised about the sharp frets you have to deal with and the faulty tuning pegs that's not typical of Kala's usual quality control and should have never arrived to you in that condition. I own 3 Kala baritone uke's and bought them from an online Uke store in the US which also happens to be one of the most famous Uke online schools. They offer their customers a free 57 point inspection and for an additional fee they offer a basic setup which includes adjusting the action at the nut and saddle, and a advanced setup that refines the nut profile, intonates the saddle, smooths the nut and bridge and most important, reshape the fret ends and level/crown frets. I always go with the advanced setup and also have them add strap buttons at the heel if needed. The frets on my Kala baritones all came with semi hemi ends, polished and smooth as glass. They are even smoother than my Taylor GS Mini.

@raymondstebbins5904 9 ай бұрын

I'll start by saying I'm sorry you're first ukulele experience was so bad buying an instrument from a box store not the best thing to do shops will do a set up as well as inspect it before selling it everyone's budget dictates what they can afford but at that price point what did you expect you should have got an enya other people reading this do some research buy from a shop set ups everything best place to buy on line the ukulele site watch some reviews/did you replace your saddle the some way you took it out

@seemycapeproductions7833 9 ай бұрын

Thanks for the sound advice and recommendation. I agree and even mentioned in my review that the model I purchased was not a higher end instrument, however I do believe that it should have e been somewhat better than what I received. Just some very basic expectations such as…. Tuning key heads that are secure, and electronics that function properly. Not too much to expect. I can deal with the rest. I also agree that spending a few more dollars to get a better instrument is great advice. Thanks again for the comment and for checking out my review.

@ahmedahraf707 10 ай бұрын

The time doesn’t countdown, if you can help

@seemycapeproductions7833 10 ай бұрын

Hello, sorry to hear your issue. I am not a representative of the company so I can only guess that there is a malfunction with your machine. You should try to contact the manufacturer of the hat pre and tell them of your issue. I have found that many times they are very helpful. Sorry.

@zeitgeist909 10 ай бұрын

nobody will nderstand untill they have the 1024 zqezxxqy1024. It's a really intuitive mixer. All you have to do is read the instruction manual. And then commit forever self sleep.

@Mahaabharath 10 ай бұрын

How to turn all of them emit white light only ?

@Joseph124269 11 ай бұрын

I see a lot of reviews about the noise coming from this pedal, is it true? Not sure who to believe.

@seemycapeproductions7833 11 ай бұрын

I have not experienced noise issues. I will say when the pitch correction is engaged more than about halfway, there seems to be some artifacts created by the effect. I think that is fairly typical of most pitch correction. I only use the pedal for live application. I don’t know if there is more noise floor to signal ratio when using for recording. I really like this pedal. It really gives me control over my vocal.

@Joseph124269 11 ай бұрын

@@seemycapeproductions7833 thank you so much for your reply. It helps a lot to make a decision.

@seemycapeproductions7833 11 ай бұрын

@@Joseph124269 you are welcome. As you know…. When using pitch correction, less is always more. I usually have it as transparent as possible so that it just helps iron out the overall pitch. The verb and delay effects are pretty good and as mentioned in my first comment, it’s nice to have the control. There are times I will fill in for local worship leaders in the area and I feel more confident and comfortable knowing I have my sound. Good luck!

@Joseph124269 11 ай бұрын

@@seemycapeproductions7833 thanks again. They don’t make them anymore though. All the sellers ran out of the product. Hopefully they’ll start making them again.

@SeattleSam-ul5hr 7 ай бұрын

What does this pedal use as a reference? How does it know the correct pitch?

@Joseph124269 11 ай бұрын

I see a lot of reviews about the noise coming from this pedal, is it true? Not sure who to believe.

@paulopinheiro3528 7 ай бұрын

i HAVE ONE.... YEAH BRO. IT HAS IT.

@Joseph124269 7 ай бұрын

@@paulopinheiro3528 I see. Thanks bro.

@ZoeDemarthe 11 ай бұрын

Hi ! I bought the same one but the setup indicator the « out » button keeps flashing red with a « click » sound do you have any idea of what the problem could be ? Cheers

@gimyoungsoyoung Жыл бұрын

beautiful singing…🥹 with or without the pedal both are perfect

@Quincyzmusic1 Жыл бұрын

Thank you so much! I appreciate it!

@seemycapeproductions7833 Жыл бұрын

Thanks so much!

@JohnStuttgen Жыл бұрын

Sounds good

@seemycapeproductions7833 Жыл бұрын

Thank you!

@Jaden_856 Жыл бұрын

Hi can you do a video on putting temp and time and how you put it on farihet because mines is staying on Celsius I need to put it on farihet thank you great video

@carloscorona9892 6 ай бұрын

I would still like a video to see how to change the type of temperature from Fahrenheit to Celsius and vice versa.

@jaehwachoi7726 Жыл бұрын

I recently bought one of these. It's my first DMX light and I'm pretty happy with it so far. I also bought the 18 LED version because I heard it's brighter but haven't gotten it yet. My only complaints are the fan noise and sound mode doesn't work unless the music is turned WAY up.

@niekgrandiek4584 Жыл бұрын

Your voice sounds so much better without the Helicon-shit. You're a good singer, you don't need it !!

@seemycapeproductions7833 Жыл бұрын

Wow, thank you!, I appreciate you taking the time to listen and comment.

@notperfect_learning Жыл бұрын

Thank you so much for your video…your temperature settings for the caps saved me from messing up my second cap. ❤❤❤

@seemycapeproductions7833 Жыл бұрын

You are welcome! I am glad the video was helpful. Good luck!

@terrytarpening9456 Жыл бұрын

The MM does not have compression per the manual. It has noise gate, DesSer, and EQ only. However, Sweetwater description clearly states it has compression too, so, 🤷🏻‍♂️

@scott8193 Жыл бұрын

Such a useful vid. Did you buy any other add ons besides the Teflon sheet and heat tape? I’m buying this machine for dtf onto structured hats. I seen someone say something about a rubber add on for the bottom platen. Can you share a link? ❤

@seemycapeproductions7833 Жыл бұрын

Hello! Thanks for watching and for the comment. Teflon sheets and heat tape is all. I of course purchased some hat blanks. Here’s the link for the press. Hat Heat Press: amzn.to/3Pvr9vk Teflon Sheets: amzn.to/3NteIxl Heat Tape: amzn.to/3Pv8sI7 Here are some Hat Blanks: amzn.to/3JxV2ae I hope this helps! Quincy

@elizabethtate4706 Жыл бұрын

I just got this heat press and I’m getting creases on hats, especially the foam trucker style. Any advice on how to avoid this? I lessened the pressure, but was worried about it adhering.

@seemycapeproductions7833 Жыл бұрын

Hello, yeah, the creases can be an issue. Especially with the foam based trucker style hats. You need to be extra careful with how much heat you use so you don’t scorch or melt the hat. I have not used this style of hat for that reason. However you might try using Teflon sheets on top and see if you get better results. I use them on my regular hats at it seemed to decrease the amount of indentation made by the press. Here’s a link: amzn.to/3qJKhuU Good luck. Let me know if it works for you.

@Taylor___ Жыл бұрын

I can’t really tell the difference!

@seemycapeproductions7833 Жыл бұрын

Hello, yeah… I was really conservative in hitting the effects too hard. I need to do another and make it more obvious. Thanks for checking it out.

@Taylor___ Жыл бұрын

@@seemycapeproductions7833 Aw thank you. Please tag me because I was looking at buying one and I’m struggling to see if it’s worth it. Delay and reverb you get in the desk anyway and the tone button is really hard to make out. And for 170 or so quid? Eeesh.

@unclemel7596 Жыл бұрын

Can you talk ? Or are you deaf

@RomeoRuizMusic Жыл бұрын

Would you say it makes a difference noise wise compared to a normal XLR Cable? Thanks.

@seemycapeproductions7833 Жыл бұрын

I would say that it matters mostly because it is shielded. The braided casing is ultra heavy and will last the lifetime of the mic for sure. There are a lot of good cables out there and any would work. I like it because of the reasons mentioned as well as the design. It looks cool with the mic. The company claims that it is designed specifically for the mic. It carries the signal great and has low noise. Hope that helps. Thanks for watching the video.

@RomeoRuizMusic Жыл бұрын

@@seemycapeproductions7833 thanks so much for the response. I’m thinking of getting this original King Bee. A friend of mine has one hardly used still in plastic and box for $100 bucks. I’m liking the sound a lot. We hooked it up and tested it out. It’s on my SHORTS videos. I’m lovin it ! Lol

@seemycapeproductions7833 Жыл бұрын

@@RomeoRuizMusic absolutely, my pleasure! I really like the original design and sound overall. I had to do a little searching but managed to be able to find the King Bee as well as the Worker Bee. Both are great mics! I reached out the the manufacturer and they sent me a new shockmount for the original that they still had for free! Good luck.

@tiavoofficial8463 Жыл бұрын

Nice review and awesome voice!! I connect the pedal with my amp but the pedal only have the input for the mic, so could i connect the guitar directly to the amp to play and sing together?

@Quincyzmusic1 Жыл бұрын

Hey there, yeah if you are using your amp for both your vocal and guitar,… if your amp has two channels, then one for your guitar and one from the mic mechanic for your vocal. Thank you for the compliment, I do appreciate it. :-)

@charliegill8740 Жыл бұрын

Thank you for this. I’ve been playing for about 6 years and always loved singing. Your video has helped a lot with my decisions.

@Quincyzmusic1 Жыл бұрын

You are welcome, I am glad you enjoyed this. I hope you keep playing and are having fun!

@charliegill8740 Жыл бұрын

Wicked song, too! Have listened to this at least 10 times just for the song alone

@Quincyzmusic1 Жыл бұрын

@@charliegill8740 Thanks so much for the encouragement, I do appreciate it.

@Quincyzmusic1 Жыл бұрын

@@charliegill8740 kzbin.info/www/bejne/p6nPiZx6mrdkoqs this is a lyric video I made of this same song. :-)

@Pontiopuzaras Жыл бұрын

have u alink to some firmware update or something else?

@seemycapeproductions7833 Жыл бұрын

Hello, I am sorry to say that I do not have a link for an update. Best option is to check with the manufacturer. Thank you again.

@Johnnyoffthespot Жыл бұрын

This is great songwriting man!

@Quincyzmusic1 Жыл бұрын

Thank you so much! I appreciate you taking the time to listen and comment!

@nicklemaster6752 Жыл бұрын

Nice vocals and playing bud, thanks for the crash course of the features and the straightforward a/b demo made it easy to hear the big difference the pedal makes👍

@seemycapeproductions7833 Жыл бұрын

Hey man, thank you for checking it out and the kind comments. I do appreciate it.

@albertgutierrez2353 Жыл бұрын

When you connect the output of the mic mechanic2 to your mixer, do you use mic level or line level? Nice review by the way! 🙂

@seemycapeproductions7833 Жыл бұрын

Hello! When using mine, I go from the out of the Mic Mechanic to a mic level input on the mixer. Hope that answers your question.

@albertgutierrez2353 Жыл бұрын

@@seemycapeproductions7833 Thank you. First I thought the output of the mic mechanic would be on line level, guess I was wrong.

@JTroskaTV Жыл бұрын

I think the older Mic Mechanics with the gain knobs were hotter at the output. The newer Mic Mechanic 2 is more or less at unity gain when the Tone button is on. Oddly, it’s a smidge hotter than unity when the Tone is off. So I think it boosts the signal maybe 3dB or so and then the Tone button uses subtractive EQing to clean the sound and get it back down to unity gain.

@luciusweickum2808 Жыл бұрын

Thanks for the vid…. How do you get rid of the box-shaped imprint left from the press, it sort of squared the front of the hat off and made a crease along the top where the heat press ended. If you’re trying to possibly sell the hats, what is the best way to avoid or get rid of that? Thank you!

@seemycapeproductions7833 Жыл бұрын

Hello, great question. Although I’m not a professional my suggestions would be… 1. Make sure you don’t have the the heat plate too tight. Maybe experiment by loosening the tension some. 2. Make sure the heat plate is not too hot so you do not overheat and burn the hat. 3. Make sure you have the inside rim of the hat folded out so that it is not in the press when applying the patch or appliqué. 4. Lastly, I use Teflon sheets between the heat press and my hat to avoid burn and impression of the plate amzn.to/3Zm4wvB I hope these suggestions help. Cheers!

@spartahill Жыл бұрын

Nice job mate.

@seemycapeproductions7833 Жыл бұрын

Thank you, I really appreciate that.

@payeyogarcia1906 Жыл бұрын

You can't find those things 🙄

@seemycapeproductions7833 Жыл бұрын

Yes, they are difficult to find. You might try looking on reverb.com they seem to have some. It’s a reliable and trustworthy site for gear. Thanks for the comment!

@awwhe 2 жыл бұрын

i love your vidss!

@Quincyzmusic1 2 жыл бұрын

Well thank you so much! I really appreciate your comment. :-)

@jamiecooper8585 2 жыл бұрын

Hey! Please can you let me know if trucker caps work with this? I’ve seen mixed reviews

@seemycapeproductions7833 2 жыл бұрын

Hello, the spring tensioner helps pull the cap tightly against the heat bed. However, it’s important to make sure your heat settings are not too hot for the materials in the cap. Nylon is probably more sensitive and could be damaged with too much heat. That being said, this heat press is durable and works as it should and expected. I for one have had a few failures as I learned. I do not work or represent Vevor in any way but do have two of their presses and recommend them.

@jamiecooper8585 2 жыл бұрын

@@seemycapeproductions7833 thank you for that, it’s always a difficult one deciding which to get!

@seemycapeproductions7833 2 жыл бұрын

@@jamiecooper8585 you’re welcome! Good luck! I hope you find the right solution for your projects. I have a link in the description to this particular press if you decide to get this one. Also, would appreciate a like and subscribe. I will be doing more videos for these kinds of products soon! Thanks again.

Ең жақсы KZbin

Пікірлер