Emmet Moore

Пікірлер

@jamescharles1852 Ай бұрын

These are from Amazon

@jamescharles1852 Ай бұрын

If the remote light does not blink

@FlyB4UDie 2 ай бұрын

Why don’t you show us that the codes actually work , because I did what you did and it doesn’t work 🤬🤬🤬

@davidmendez37 2 ай бұрын

what if light stays solid blue when I press C&D and A&B together. They don't flash

@KurushimiVrishraka 2 ай бұрын

Does not work to cloning lift master though.

@2000jago 2 ай бұрын

0:37 - So what are the instructions for the OTHER two types ? I must have one of those because this instruction to reset codes didn't work.

@DoggieStyle-xo6vb 3 ай бұрын

How come does work for me? I reset everything cloned it. It picks up the new cloning, But it doesn’t work. HELP

@edgarsilva8263 Ай бұрын

Your gate receiver may have a rolling code system. Some programmable controllers work for me while others don't, the weird part is that the controllers more often then not don't have any clear indication of which they are, or anything else that may be useful. One of my gates I was able to program a new controller, but then the old one for some reason stopped working. I have no clue, really

@darrenmcgovern2046 3 ай бұрын

Hey, I have cleared the codes but the programming will just not sync! Any help here?

@IlicIvan 3 ай бұрын

Just one question.. On the original garage key, my garage door lift button somehow got reprogrammed and I have to hold down the button constantly to raise the door, the lower button only works with one click.. How can I fix this?.. Does anyone know? someone

@bekiss2 3 ай бұрын

Thanks from Hungary!!!!!garage key cloned!

@mosiahwilliams8460 3 ай бұрын

Not working. This is shit

@patrycjaradecka950 4 ай бұрын

Hi, not sure if someone has the same issue. I have the same garage fob, but a few weeks after programming it's not working and I have to do the programming again. I even bought two and they both lost programming at the same time. Does anyone know what could be the reason?

@nunomuchao 4 ай бұрын

Thanks

@Paul_Munro 4 ай бұрын

Perfect 👌👍

@AAndre12 5 ай бұрын

How can i add new device and not clear previous ones (on A and B I already have two devices, but I want to ad on C and D 2 more new devices). I want to keepA and B, jut want to add to C and D without reseting A and B (don't have option to clone A nad B again)

@PaulTilleyJnr 5 ай бұрын

Legend, worked a treat

@OLDUSAFMedic 9 ай бұрын

Most of these scams show the device cloning a garage door opener remote that looks like a car key fob. It is not for cars and doesn't even work on most modern American garage door openers.

@maabym 6 ай бұрын

Works well for me ;) check the frequency of your original garage remote before you buy.

@1990drewman 9 ай бұрын

Thanks for that mate

@rizon406 10 ай бұрын

Nice one, mate.

@SGSAutomotive Жыл бұрын

I can clear them no problem. But after programming working earlier with button flashes I can’t get it to work again

@davegrimm4891 Жыл бұрын

this saved me. Instructions that it came with had no mention of needing to reset the buttons first. Once I did, programming it worked instantly

@DrWenChannel Жыл бұрын

Is the Genie GM3T or the ACSCTG Type 1 remote considered as 315/433MHz remote and can use this method? Thanks!

@wowerman Жыл бұрын

I have tried many methods on youtube. The biggest unknown is if remote has fixed code or rolling. If this is rolling type of code you may not clone remote settings sadly.

@A-RJ Жыл бұрын

I had no idea you had to reset it. I thought my 2 yr old had drained the battery so I got new ones and still wasn’t working. Turned out he had just pressed all the buttons at once and reset the thing. I feel a bit thick now but thanks for this video big help 😊

@dianazamfirescu359 Жыл бұрын

Hi. My remote is continuously flashing and no combination of keys can stop this. Do you know what i can do?

@kennethberg Жыл бұрын

crap from china,dont waste your money it doesnt work

@denis8321 2 жыл бұрын

Works for me, keys are programmed, but when I try it on garage doors, does not work. Any suggestions??

@trekgod3 Жыл бұрын

Your garage door opener probably uses rolling code technology. The code is scrambled and changed every time you press the button. The ebay listings for these specifically mention that they don't work with rolling code systems

@denis8321 Жыл бұрын

@@trekgod3 is there on ebay/aliexpress keys with this rolling code function to order?

@trekgod3 Жыл бұрын

@@denis8321 nope. You need to look up the make and model of your opener and find a specific replacement

@RonSamson 2 жыл бұрын

Worthless POS

@maneetsingh7074 2 жыл бұрын

Can this mess up the original

@honestchris7472 2 жыл бұрын

I have tried a few of these on my garage key remote but have not found one that will actually do it.

@Angultra 3 ай бұрын

Same, I suspect the cheap 433mhz remotes are not compatible with my Chamberlain Edit: Upon further research, I believe I need 390mhz

@honestchris7472 3 ай бұрын

@@Angultra I have never found a result for this and I am still looking for one that will work, if my remote stops working I will have to buy a new garage door motor. I hope that you have more success than I have.

@Eliseovillarreal 2 жыл бұрын

I have a xtreme garage door opener and did I not work.

@peterbroad1772 2 жыл бұрын

The solution for me was: hold C and D until the flash hold A and B until the flash KEEP HOLDING A (this bit is missing in instructions below) AND RELEASE B THEN PRESS B THREE TIMES the keys are now clear and there is no light when you momentarily press A, B, C or D Hold down the letter button you want until it flashes and activate the key you want to clone.

@marcathcart7968 Жыл бұрын

Thanks that was the important bit

@FarahAway Жыл бұрын

BROO THANKS SO MUCH IT WORKED BROO I TRIED SO MANY TIMES ON OTHER VIDEOS AND IT NEVER WORKED BUT YOURS WORKS!!

@bigbadaboomboom 9 ай бұрын

Thanks yours was the correct way for me. I got miner from Amazon and it has a blue backing on the fob

@michaelbooth973 9 ай бұрын

Thank you so much, this worked a treat. The included instructions were absolutely useless and none the tutorial videos worked either.

@IlicIvan 3 ай бұрын

@paulcunningham4815 2 жыл бұрын

Used the press B 3 times method and the copy code sets. But then it only works once, as if it loses the code as soon as you use it. Any ideas?

@Human-bf7kz 2 жыл бұрын

Battery might be dead or loose .

@AndyNock 25 күн бұрын

I found the same, did you work it out?

@ydlazkov 3 жыл бұрын

On part 0:50 you said "gone" but the lead light flashed once the same as in part 0:30. I did exactly you showed. But nothing works. 😞

@jeriwidian8502 3 жыл бұрын

Hold A press B 3 times Make sure it was reset Press any key and the light not on If the light when you press is on It must be the reset fail Then do copy

@prestige4ad 3 жыл бұрын

It work with me only for one hour than I need to reprogram again 😅 can you suggest me.

@emmetm1 2 жыл бұрын

That is annoying, sometimes the battery connect separates on them as they are cheaply made and that happens

@deepaksiwach2179 3 жыл бұрын

bought the same control. I did everything you said and didn't worked! Do you have any suggestions? My original key is Hormann Promatic

@jeriwidian8502 3 жыл бұрын

You have to reset first Press A + B till light blink Hold A press B 3 times Make sure it was reset Press any key and the light not on If the light when you press is on It must be the reset fail Then do copy

@emmetm1 2 жыл бұрын

Double check the guide from the seller they all have ever so slight differences in the coding

@chrisc7914 3 жыл бұрын

Thank you

@mariorossello7071 3 жыл бұрын

thx works for me

@yves2348 3 жыл бұрын

Biggest scam from China for YEARS in a row, I had loads of them from different suppliers, they kept sending new ones for free... none of them worked, they couldn´t be erased.

@mrlee5108 Жыл бұрын

Can wipe them off the system.

@seannolan3458 3 жыл бұрын

I have 2 alarm fobs for my jeep and 1 of the 2 remotes doesn't work . If I was to buy these universal remotes would they copy onto my jeep remote . I've liked and subscribed to your channel . Can you put up a video on how to pair to a jeep / car alarm remote and show it with the vehicle before and after please . Thanks . That's a good Dublin accent . Keep up the good work pal .

@emmetm1 2 жыл бұрын

haha! So funny I made this video ages ago and never checked the channel gas that is has this many views. Unfortunately I have a bmw and wife has a mini(also bmw I suppose) and I don't have any fobs that will pick up those freq. Might try finding one!

@gurmukhdulay3534 3 жыл бұрын

Ok I I am ok

@hectormagana3732 3 жыл бұрын

Yeah I bought one but the lights don't flash on mine when I push the bottoms don't buy shit from China

@jon134a 3 жыл бұрын

It does not work Bác your sy.stem I’d not 433mhz. Buy 380 MHz to try.

@bagun5436 3 жыл бұрын

I copy the code exactly as you did, the lights are exactly as yours, but then... doesn't work.

@TomBTerrific 3 жыл бұрын

Same here very frustrating. I have looked at several videos on remote that looks identical but cant make mine work. Only get 1 blue flash. I can get fast flashing light by pushing both A&B or C&D but that’s it.

@gulabjamun173 3 жыл бұрын

@@TomBTerrific yeh same result for me too. Product might be faulty.

@jeriwidian8502 3 жыл бұрын

Hold A press B 3 times Make sure it was reset Press any key and the light not on If the light when you press is on It must be the reset fail Then do copy

@clifdog5 4 жыл бұрын

Pressed the button at the same time but still all buttons lights up

@benmyh 3 жыл бұрын

Hi Any solution to your problem?

@jeriwidian8502 3 жыл бұрын

Hold A press B 3 times Make sure it was reset Press any key and the light not on If the light when you press is on It must be the reset fail Then do copy

@jijdaar4066 4 жыл бұрын

Didn't work for me it only reset

@imanidiotanyway6393 3 жыл бұрын

Cuz it may not be same mhz

@MsVincentC 4 жыл бұрын

Hi, can you send us the link from where you get it?

@GEOTEAM32 4 жыл бұрын

I bought the same control. I did everything you said and didn't worked! Do you have any suggestions? My original key is a pujol vario

@bagun5436 3 жыл бұрын

mine also didn't work

@jon134a 3 жыл бұрын

Buy 380 MHz, 433 MHz is not compatible with your device.

@thefastandthefurious1 4 жыл бұрын

Doesn’t work

@TomBTerrific 3 жыл бұрын

Were you able to get this to work? I’ve had no luck.

@thefastandthefurious1 3 жыл бұрын

@@TomBTerrific I have these notes in my phone. Have no idea if they’re the right notes or not though. Give it a try and let me know if it works. New remote: Press and hold top 2 buttons until they flash a few times. keep pressing them and then press button 2 three times until lots of flashes. Press and hold lightning (or button that opens the door) of current remote. Press and hold button 1 of new remote until both flash lots. They are now paired.

@SzymonMelewski 8 жыл бұрын

Sound like someone is farting lol Is it like this in real life?

@audriux96 7 жыл бұрын

its mic distortion, how do you not know this?

@666hicat 11 жыл бұрын

Yes you can I'm running a pear off 6 x9 blackair speakers off my head unit and thay sound brilliant and is onley 25 watt

Ең жақсы KZbin

Пікірлер