Did you clean out the injection return lines before installing the new pump? Sounds like it may have pulled crud from the old pump problem through the return side and has the new injection pump plugged up.
@BackFarms3 ай бұрын
I didn't but I did after the rebuild pump gave me the same issue.
@Pennies_on_the_dollar4 ай бұрын
Man yeah!!! Getting awful close now!! One of the best fishing lakes around!! I hope your ventures may include some NC stops 😁 Hoping your work schedule works the way you want it too 😁 Thank you for the tour, never been that close at the bottom of the dam. Look fwd to seeing what you get unto next 😁😁🇺🇸🇺🇸👍👍
@BackFarms4 ай бұрын
There will definitely be some NC stops as long as time permits. I could of got right up to the bottom but there was quite a few people fishing and I didn't wanna disturb them.
@Pennies_on_the_dollar4 ай бұрын
@@BackFarms 🤞🤞 Ttjat was pretty cool to see regardless!! 😁😁
@gleanerk4 ай бұрын
You pronounced it correctly,but you’re in the south so we call car lake or even better bugs island lol !
@BackFarms4 ай бұрын
I thought I was right and I thought the guy on the radio was talking about that area.
@cesmith45665 ай бұрын
I know how that goes, life and work comes before the fun. Good luck on the job in Virginia it'll be a lot of time away from the family! If you need anything call ,sitting in a hotel room every night ain't much fun. Stay safe traveling!
@gleanerk5 ай бұрын
When finished,it’ll be a great planter 👍🏻🇺🇸!
@BackFarms5 ай бұрын
Yes it will. I'm gonna be in your neck of the woods, might have to come pay you a visit.
@Pennies_on_the_dollar5 ай бұрын
Man yeah, you went after it Logan!! I know how those buildings can be getting stuff into!! That M sure does run good!! What was that , that came out of the excavator bucket during the swing? Pretty good purchases, looking fwd to seeing those cultivators on the M!! The sprayer project will be right up my alley!! 😁😁 I hope you didn't come down too sick 🤞 Look fwd to seeing whats next, and thank you for bringing us along!! 😁😁👍👍🇺🇸🇺🇸
@BackFarms5 ай бұрын
Must of been some mud or horse manure that fell off. When I moved it the last time to where it was when the video started I had a tape measure on it that I couldn't see and I swung over the planter and it fell off hit it.
@Pennies_on_the_dollar5 ай бұрын
@@BackFarms 😁😁😁👍👍👍
@gleanerk5 ай бұрын
Enjoyed watching! Hope the family and you are well !
@BackFarms5 ай бұрын
Everything is good my way, hope everything is good your way.
@dehavenfamilyfarm5 ай бұрын
I have to shuffle equipment around quite a bit too. Good prices on the equipment!
@BackFarms5 ай бұрын
Never seams to be enough room for equipment.
@gleanerk5 ай бұрын
Is it still working?
@BackFarms5 ай бұрын
To be determined, I think the residual oil is still dripping off it.
@gleanerk5 ай бұрын
30
@VintageFarm10865 ай бұрын
That's going to make good fertilizer
@Pennies_on_the_dollar5 ай бұрын
I do love that shop😁😁😁
@gleanerk6 ай бұрын
Trailer legal ✅! Truck needs repair 🤔💰!
@BackFarms6 ай бұрын
Legal trailer and no truck to pull it, that's how it goes right.
@Pennies_on_the_dollar6 ай бұрын
Man yeah, you just dove right into that wiring!! I need to add those silly clearance lights as well to my gooseneck. Y'all have harbor freight there? Those trailer wiring kits have a good amount of wire and it's nice gauge too! I buy it in place of rolls of wire 🤣🤣🤣🤣 Turned out nice, OCD huh....Yep, I know EXACTLY 😁😉 Oh my on the truck, I bet that wasn't cheap at all , or have you tackled it yet? Thank you sir for bringing us along!! Look fwd to seeing what's next!! 😁😁👍👍🇺🇸🇺🇸
@BackFarms6 ай бұрын
We have harbor freight but I just buy the wire and lots from rural king. The wire comes in 25 ft rolls of I remember right and I think the lights are better. I haven't tackled the truck yet, I'm honestly afraid to. It's not something I can check and put back together if I need to use it while I wait for parts, it's all or nothing. Once it's apart it's apart till I fix it.
@Pennies_on_the_dollar6 ай бұрын
@@BackFarms I wish we had rural king close 😢 I buy the wire set minus the lights, it's like 14 bucks and it's 25 ft I think. I would go broke in a RK 🤣🤣🤣 Oh my, bet it's hard to be without a working truck, I hope it goes well when you do!! Keep us posted!!
@BackFarms6 ай бұрын
@@Pennies_on_the_dollar it still works but just not 100%. I used it today to make some pennies for the four digit dollar part. If I knew 100% if it was just the actuator that was bad I'd buy it and replace it but the turbo could be sooting up making the actuator go bad. So I have to pull the actuator to check the turbo which means I have to drain all the coolant pull the actuator and check it. If the actuator is bad a can't just put the old one on until the new one gets here because it needs to be calibrated which requires a friend with a scan tool or a $200 purchase on my end.
@Pennies_on_the_dollar6 ай бұрын
@@BackFarms 😳😳🤦🤦 Man that can get complicated quick!! 😳😳
@BackFarms6 ай бұрын
@@Pennies_on_the_dollar yea I'm like you with an updraft carb 🤣
@gleanerk6 ай бұрын
Happy new year to the family and you .
@dehavenfamilyfarm6 ай бұрын
Enjoyed the harvest footage! Is the F bigger than the G?
@BackFarms6 ай бұрын
The G is the next size bigger than the F.
@trailrider01946 ай бұрын
My grandfather had a 45 baler on the farm I grew up on. My dad did all the baling pulling it with a Farmall Super C. I had to ride on the twine box and stop him when a bale didn’t tie and we could tie it by hand while it was still in the chamber. It’s a fond memory but one I wouldn’t want to relive. I must have eaten a ton of dust. I wore goggles to keep the dust out of my eyes.
@Pennies_on_the_dollar6 ай бұрын
Man yeah Logan, ole gleaner held its own though!! Really enjyed seeing the boys in there with you!! Sounds like you have some changes coming for sure!! I am so excited about seeing how my first year will go!! I really appreciate the advice, and insight!! Looking fwd to seeing how things continue to unfold!! Thank you for bringing us along!! 😁😁🌽🌽🌱🌱🇺🇸🇺🇸
@gleanerk6 ай бұрын
Totally understand on combine and also only had 6 ish acres but felt like it was a hundred acres. You and the boys getting it done !
@RandWFarmstead-TonyWalsh6 ай бұрын
Looking a forward to seeing what you have going on Logan. Take care and have a blessed rest of the week my friend.
@BackFarms6 ай бұрын
Thanks and Merry Christmas.
@gleanerk6 ай бұрын
It’ll be interesting! Glad you are back doing videos on a schedule. Later da da look
@BackFarms6 ай бұрын
They will be on a schedule as long as I can make them, sound like some out of town work is in my future.
@richardwade41946 ай бұрын
Was the. Gleaner scrap yard you was at Genes i have F3 and 4010 i use
@BackFarms6 ай бұрын
Yes it was. I don't recall seeing an F3 and they might have a 4010 or two, we got some parts for our 4010 from them.
@richardwade41946 ай бұрын
Been dealing with them when the father was alive good guys to deal with they have 1 F3 but most F2 stuff is same I have F2 to sell and the 13 grain head for it
@BackFarms6 ай бұрын
@@richardwade4194 I've been trying to get 2 F2s in a trade deal but the other part go back and forth losing each other's contact info.
@Pennies_on_the_dollar6 ай бұрын
Man yeah!! Looking fwd to it Logan!! I am jealous that you have a shop to keep all those goodies and work on them!! I froze my NC jiblets off yesterday pulling the carb on Glenda!! Looking fwd to the schedule and upcoming work!! Hope y'all have a Merry Christmas!! Should see one Saturday shouldn't we? Duh...Nelson that's what he said 🤣🤣🤣🇺🇸🇺🇸😁😁👍👍
@BackFarms6 ай бұрын
I'm not gonna lie it's nice 😂 but it's not heated and concrete I swear is colder than the air temp so I freeze anyway but just killing the wind and rain is worth it.
@Pennies_on_the_dollar6 ай бұрын
@@BackFarms Yes I agree that concrete can keep you chilled, but with y'all's winters....the rain and wind delete had to be amazing like you said!! 😁😁👍👍
@BackFarms6 ай бұрын
@@Pennies_on_the_dollar here lately we've had NC kinda winters 🏖️
@Pennies_on_the_dollar6 ай бұрын
@@BackFarms I have noticed that!!! 🏖️🏖️🤣🤣
@joshuawheaton6226 ай бұрын
This is cool! Hopefully they dont go out of business unfortunately here in Michigan i think theres only 2 places I know like this thst still exist. All of the tractor and combine salvage yards here been closed up! One of the only ones remaining only take in combines from the 80s up they said its cheaper for the farmer to buy a dozen pre 80s combines that it would be to buy the parts from them at a yard.
@matthewbesecker44326 ай бұрын
Where is this located? There's a few parts in looking for? Merry Christmas from Besecker Family Farm to Back Farm and family.
@BackFarms6 ай бұрын
Attica Ohio, Merry Christmas to you as well.
@gleanerk6 ай бұрын
Parts galore 👍🏻🇺🇸, enjoyed watching! Merry Christmas to the back family
@BackFarms6 ай бұрын
Thanks, Merry Christmas to you and yours as well.
@cesmith45666 ай бұрын
Some people go on vacation to Disneyland...Logan: the boys and I are going to the combine bone yard!!
@BackFarms6 ай бұрын
Heck Ya
@dehavenfamilyfarm6 ай бұрын
Lot of cool history there. Would be a shame if they all got scrapped....
@BackFarms6 ай бұрын
Yes it would.
@farmworkMi6 ай бұрын
Man its crazy how many there are seems like you could buy like 4 of them and make one whole one
@BackFarms6 ай бұрын
The determining factor on how many you could make would be unload augers. Definitely a shortage of good ones.
@davidcarroll46766 ай бұрын
My grandpa ran a gleaner e gas combine for years
@fredf33916 ай бұрын
Twinsburg is south of Cleveland . Every year in August they celebrate twins I found it by accident looking for a Nestle warehouse back in 90s maybe check it out
@BackFarms6 ай бұрын
I've heard of that
@cliveabrahams21836 ай бұрын
Lovely ,❤nice so sad to see her going ❤❤
@gleanerk6 ай бұрын
Da da look ! Thanks for educating us on that part of the assembly of combine! Enjoyed watching!
@BackFarms6 ай бұрын
Lots of da da look that night.
@cesmith45667 ай бұрын
After working on M2 for the last5 years ,Everything on an F is just so little? I need to replace a bunch of bearings on mine also ,it made it through corn but is awful noisy
@BackFarms7 ай бұрын
What you meant to say was everything is a more manageable size lol. I was lucky to make it through beans with the bearing and I was lucky to make it through corn with everything else.
@gleanerk7 ай бұрын
Yep I’m on the agreement on lottery and biden economics! Wow you did it and shared info on how too ! Thanks buddy! I’ll have to invest into torch !
@BackFarms7 ай бұрын
It's tricky to make a how to video and cover everything. But I think I got most of the good points.
@richardabrahamson58117 ай бұрын
Torch the bearing. It works. Nice video
@Pennies_on_the_dollar7 ай бұрын
You are an inspiration regardless Logan, glad you finished and the ole Gleaner made it!! 👍👍😁
@RandWFarmstead-TonyWalsh7 ай бұрын
Farming is always tough, better luck next year.
@BackFarms7 ай бұрын
Yep, isn't that all farmers say "there's always next year"
@eugenedev81647 ай бұрын
I have a 1990 LN7000 my self
@Pennies_on_the_dollar7 ай бұрын
I am behind, but looking fwd to seeing it back together!! 😉😉🌽🌽
@BackFarms7 ай бұрын
I haven't put videos out on it yet, still putting ones up from the rest of the year. I'd say around Thanksgiving this first video of the repair should be up.
@Pennies_on_the_dollar7 ай бұрын
@@BackFarms Looking fwd to seeing it, trying to get started myself on ole Glenda and a header cart!
@RandWFarmstead-TonyWalsh7 ай бұрын
Best wishes getting it put together and picking your corn.
@gleanerk7 ай бұрын
Didn’t take long 👍🏻🇺🇸💰
@joeschraubecornfield59457 ай бұрын
My dad had a 45 that damn thing would not tie consistently which made a long day in 85 degree heat ,I was never so happy to take it to the scrap yard so it would not be some else's misery !!!😮
@donvoll25807 ай бұрын
Good day from Ontario I remember many yrs ago neighbour had one. Up here they were really nothing. Yes I think it will be a tinker toy 46 were better, Massey came long proved very well Yes we had 273, I think NH had it made. Thanks
@raymondutter26167 ай бұрын
Pop had one with a 4 cylinder Wisconsin ,pulled with the farmall H.. Post the equipment please, show us more than plow day. Thank you for the 45 ...
@gleanerk8 ай бұрын
Yes I agree,need more implement at tractor shows .
@RandWFarmstead-TonyWalsh8 ай бұрын
I agree with what you say in that no one shows very many implements at shows. I started a video series on roadside finds and have enjoyed seeing some old implements. Thanks for sharing this piece and hope you have a blessed day and week ahead.
@cesmith45668 ай бұрын
You never have problems with any of them when there's no hay on the ground!