So you don’t allow comments..no wonder

You see those lines?? You see any other cars?? You see you have OCD???

Got mine for $325 plus shipping 🎉

Love the walnut furniture

I being doing some research before buying. my options are either X300 ultra or X300 turbo it comes down to this . X300 turbo a long range flashlight that is a narrow light but helps you see everything about the aggressor from really far away and close range even helps you with aiming and no matter the distance the aggressor will always be blinded and visible by the light . x300U its more like houses type space basically short range wide spread light not very strong . Honestly im gonna go for turbo because of my duty gun cartridge 10mm . It’s my duty gun and my all purpose gun Springfield XDM elite 10mm compact.

Isnt this gun basically a remington 700

Thanks for the video,I’ve got my eye on one of these, I actually prefer the wood traditional stock without a pistol grip and funky adjustable stock, but I’m also old as shit!😂

13:49 Have you ever shot a rifle before? Really?

I might consider this over a Mossberg series shotgun. This is CA compliant too.

You can have a pistol grip on a shotgun in WA but it has to be part of the stock. AR style are banned.

Yet another lacking review. How did it wear? Is it wore out after 4-500 hundred rounds? I mean, just because it still chambers and fires a round tell me very little about the quality, to be honest. Those gas rods could be mushroomed and nearly at the end of their operability.

ALL 1911 models MUST have the barrel throated CORRECTLY as to allow the proper feeding and ejection of all ammunition regardless, even reloads...also carefully check and clean your magazines and look for anything abnormal which could cause a stoppage......These days all manufacturers throat their 1911's, HOWEVER, AT TIMES THE GUN SMITH THAT IS DOING THIS DOES WORK LESS THAN ACCEPTABE AND YOU BUY IT AND HAVE A NITEMARE

The 2 best deals in the AR world is 1. PSA premium uppers and kits (if you get ones with no PSA markings and you let someone fire it assuming you have used good parts will assume it's a high end rifle) The best piston AR upper you can get is the T91 upper (wolf A1 upper) it's from Taiwan and unfortunately due to legal reasons they could not get the CHF barrels chromed lined but got a good company to nitride them properly, it's a better system than the HK416, it has been used around the world and will fit on any AR15 lower, it's under 600 dollars but company's make upgraded parts for it. If I had to pick up an AR it would be a 18-20 CHF CL build that's milspec + FN CHF CL barrels are if not the best at least one of, if you can only have 1 rifle CHF CL will just last and with a chromed chamber it makes a rifle so much more reliable especially in feeding and extraction. The US millitary FN barrels on ARs are Hutton cut with a standard chrome lining. When a barrel is cold hammer forged when it comes out of the machine it looks perfect like a mirror and the way FN does it with it's CMV steel and thick lining it's just so much better, I'm pretty sure most other high end company's that offer CHF CL barrels just outsource to FN. I really don't trust or like nitride finishes, some company's do it well but to be honest it really only helps on pistol barrels, so many screw it up I think your leaving our the Pros of a FN CHF CL barrel as they are milspec plus also the much higher performance of a 18 or 20 vs a 16 or 14.5 with ARs I base any build around the barrel and unless it's an obscure caliber it will be FN CHF as for BCGs I'm not sure about the new PSA but milspec phosphate chrome is the best you can get apart from fully chromed. A pinned gas block / gas block/FSB is very reliable and I don't trust Bolton or grub screw ones, my uncle still tells me that cutting off the front sight and grinding it down so it's just a gas block is still better than 90% of the stuff on the market, it can be hard to find low profile gas blocks that are pinned or have the same pin position but it makes the system much more reliable. I got the same kit many many years ago, my first AR build when I was 15 with my uncle and a anodoised 80, the only parts that my ubcle insisted we changed our was the gas tube to a quality inkinel and the extractor spring. With PSA you need to dissasemble it and make sure that the bolt to barrel is clocked, true the upper and torque it down properly, I did not go for a M16A4 direct clone, just went with a good quality solid free-float rail that was on sale and the most comfortable grip to me, rail is kind of short but I don't need alot of gadgets, flashlight and a laser, forgrip, or bipod you can get some pretty light LED lights. But what's ai important with an AR build is making sure the parts are quality and also asking sure everything is tored and staked, hi early you can just buy alot of AR building tools and a borescope on Amazon for a good price or eBay for a lower price but with Amazon you can just "borrow them" As for optics apart from realy high end stuff they are all made in China but some optics company's owned by Notico and others makessome incredible quality magnified prism optics for a great price. A carry handle is good to learn irons, you can get no name backup irons made out of metal for a good price. The recoil is minimal I like the standard flash hider or a 3 prong. I line fixed butstocks like the A2 but also other upgraded ones, cleaning kit and the great thing about a fixed stock is the fact it won't break, it's also nice you can attach a bayonette. My GF who is a very petite east Asian girl that's 5ft5 find the length of pull on the A2 stock fine, recoil is like nothing and the weight is also fine but I'm mostly an AK guy and she prefers AKs also lol For AR builds a real bargain that's available right now is a FN CHF CL 1/8 18" barrel that's 150 Overstock from FN and while online it states .223 it's EU spec .223 and I purchased nearly 10 of these barrels at a discount as they are such good value. On them they all say .223/5.56 the chamber is tight but in a good way as in sib MOA CL barrels. Also another good deal for 110 is a fully chromed MB BCG and bolt that has upgraded springs and an upgraded ejector, alot of company's use MB bolts, the extractor was chromed on the outside but not the inside as fully chromed can cause issues for it to slip. It's easy to clean, looks like the older M16 BCG Alot of people don't realy realise how much more velocity, effect and range you get from going with an 18-20 even vs a 16 if you need a sub 16" barrel your much better going with 7.62x39 or .300blk My truck / car gun is a Romanian AK (full size Draco) with a 12 inch barrel, riveted on an optic rail for a 4x prism, surplus wood forgrip, side folding triangle brace that's mounted in solid and you don't loose much velocity Vs a full sized AK. I used some pic rail between the handguards for a small but powerful LED flashlight, it's a sub 2mao gun, very compact and easy to conceal in a tenis racket case, good out to 400 yards max but since the round is hard hitting and penetrates well I feel anything under 300 yards it's easy to hit and if you had to disable an engine block it would do just fine, I just use 30 or 40 mags usually steel but if you use it for home defense it's best to use some jornady defensive ammo or even some powder coated cast lead. For reloading .300 is better but less powerful and if you want something ultra reliable in a short package it will be quite expensive.

Not realistic enough, ATF guys look like chads

How did you get an optic mounted on a Mk 25 they don’t come with a cut slide and what optic is that do tell

There are some great vids on adjusting the gas. It really helps. I love mine here in Commiefornia. I'm a lefty too.

Holio

I'm annoying tf outta my gf the rest of today with bungholio 😂

I didn’t know a thing about the mod-0 myself, until about 3 years ago and I became absolutely obsessed with it. But I’m also obsessed with geissele, so they had a “what if”? Child… mine is a 100% geissele 10.3 SBR, mill spec (non super duty) parts kit, “F” stamped A2 sight installed on geissele barrel, and every single clone correct component that one would need . I don’t consider it a clone but yes I did have the Crain logo engraved on the right side mag well. It runs gorgeously, but yes it did stir up some controversy the first time I took it to the range. …OH WELL!

Mossberg m149 hawthorn

what rear sight is that? cool rifle, I have a MK18 Mod 1 myself

The Kirkland Signature hoodie is Napoleon Dynamite level humor 😂

🤦🏻‍♂️

What rail is that?

i usually clean my gun after every range visit... but i shoot between 300-500 rds per gun per range session.

I've had NFA sbr's in the past..now I roll with pistols, less gray hair and I get too keep my dog's.

Ur my hero

Junk

312.37 at Dahlonega Armory today....you're welcome

Any issues with loading the mags? I have 4 in total including the ones that came with it, and only one loads normal. The other 3 with a uplula take some effort to load.

I love the candela of the turbo it’s great for pid and wont be like a flash bang indoors as much 😂

Fn 20 round mag I think can fit

I feel your struggles brother. I live in IL, I understand. I have the Benelli as well as multiple post patent Copies. I will assure everyone, a manufacturer, located it the same town as Benelli, Benelli, Baretta, & Stoger Factory is a plus. I have a friend who lives less than an hour away, and has family who work at B,B,&S factory. He explained the difference in the different exporters. Some are satisfied with the cheapest they can get, while others supply a Quality Control standard that must be met. So I asked him to find out who's the most concerned about Quality Control & Quality Assurance. It was almost a month and he told me all about two US Importers. One buys only quality firearms and checks and tweets a few things when the arrive, adding multiple upgrades his customers want. The other does the same thing, but doesn't only offer the Tacticool extras, but multiple versions of the firearm. As well as multiple firearm models. Saving money on transportation costs, by filling a 52' high boy shipping container. After a little research I ordered the same version as you have. Dismantling it and the patented original. It had NONE of the items that others had talked about. After 2,000 rds, zero feeding issues, no excessive wear, no hokey looking machine marks, junked up piston, not ghost loading and cycling, loose screws, blah, blah, blah. I have sold my other versions, and a buddy's friend wants the "Patented Version"... When my "out of stock" order goes thru. Avoid the propaganda and foolish issues because some clown didn't clean & lube his new firearm and check all fasteners. If you read a test or review that includes this lack of due diligence, move on, the guys knowledge and understanding is sub par. Take it from experience, excessive experience at that. Want a Benelli? Order 4 of these for about the SAME MONEY. Want to know why they are this cheap? The monetary value of the Lira was under 60% of what it was, compared to the dollar. I had a guy tell me all about the Turkish Knock Off's, while carrying a Glock Gen 3 "Knock Off" and never owning a Benelli or a post patent version manufactured a block away from B,B,&S. with the same machinery, and a talented & experienced work force that got laid off from Beretta. Including engineers, machinist, and gunsmiths. But he had all the negative propaganda down pat. Just didn't know any of the details. And wasn't interested in learning. Boys, it pays to do your research and gather the facts and data, because without it, you sound like fools. Does yours say... Manufacturered By AKSA Arms?

QUESTION, MANY PEOPLE WHO OWEN THIS GUN SAY IT HAS MISFIRE ISSUES and front sight falling off....what has been your experience at the range ?....ALL 1911'S THESE DAYS HAD THEIR BARRELS THROATED FOR THE PURPOSE OF ELIMINATING MISFIRES WITH DIFFERNT KINDS OF AMMO BY THE MANUFacturer during it's production....i am hoping the people who wrote all these negative comments were beginners and/or set ups.....please respond, because these comments are killing this weapon.....thank you.....

That skyrim outro music tho

Your audio only comes in my right ear

Thorough review! Thx.

I have so much to say.. I disagree with some of these tips.

FarCry5 soundtrack used 🗣️🗣️🗣️ ‼️‼️‼️‼️

Great video 😊 would y’all be interested in doing a video someone just getting into firearms? If not i understand 😊 keep up the good work!!! ❤

Far Cry 5 theme is a nice touch 🤌🏼

wen pewtube rebrand

Reminds me of nam

Dude looks super tactical, bet he could jog at least 10 paces

Love the look and feel of this gun. And like the way it shoots, but I don't like single action guns. Make a double action, and I'll buy two.

Nice

Good video, but dude, you sound scared.

I appreciate the review fellas! Good stuff 👍

If I'm correct, isn't the break-in period on these like 100 rounds?

M16A3=full auto of the M16A4, it was developed and issued to the Navy mainly the Seabees. M16A5 is basically the M16A5 with a voltor extended buffer tube with a collapsible butt stock. Just 20 inch Bear Creek Arsenal cold hammer forged and putting together an AR15A5 like rifle.