Thanks bro for the video, you saved me sooo much money on my A6!!!

Thank you so very much! Very helpful!

I LOVE YOU BRO ❤ YOU ARE THE BEST IN WORLD , THX FOR YOUR EXPERIENCE 🎉❤

My 2024 ML350 did not have the top 'overhang' that door panels usually have. Instead, you it plugged into the upper part of the inner door frame and required you to leverage it inwards to the interior. No amount of upward lifting would dislodge the door panel. Just an FYI for video viewers who might come across the same issue.

01 AudiS4, you are the man!!! One of the easiest fixes I've seen for my car!!!! Thanks!!!!!!

Thank you for putting this video I tried it on my A7 and now there is no more rattling sound . You saved my 1000 dollars Thanks you

Oh no I have to do that on my Audi 😭 A8

Thx a million I was just about to purchase a new one!!!

I have a solution for this. Already tested and working like a charm. Not sure how long it will last but here goes. First go out and buy "JB Weld 33301 Total Repair - Accelerated Instant Cure Super Glue, 0.18 oz" comes with a UV light attached which cures the glue instantly and hardens. JB weld says it has about 2700PSI of strength and withstands temps of around 300F. Apply small amounts at a time to each side of the triangle piece that is protruding from the flap piece and utilize the UV light to cure. Once you have all 3 sides cured. mate the triangle piece and see if it fits snug. If slightly loose, then apply a small amount of glue to each edge and cure it with the UV light. Then try again, if slightly hard to mate the triangle piece you are ready to put all back together. once you have the manifold flaps put back in place. Slide the female throttle piece into position, using slight force and making sure the flaps are facing the correct position. Then test out the function with your hand. Once you notice this has no play what so ever, you are done with that part. Now you will need to also buy "2.0T TSI Intake Manifold Lever Arm Fix Kit" Install that in place to prevent the triangle intake manifold arm from slipping back out. This device will ensure that doesn't happen. Voila, problem solved. You can use this technique on Audi/Volkswagen's that have the same style intake manifold issues.

Thank you. It works !

Thanks man! Greetings from UA

Having the same problem rn

your video is helpful! save us a big time!

HI this is the best explanation i have seen with p2015 code i hope to repair manifold thank you very much

Thank you for this! I've been searching for 3 months on what has been causing the lumpiness in the engine and the loud as ticking.

I reset it a 6 times and it worked, let the car idle after reset, the. Turn it off and do it again.

Can I apply this on Audi original speakers?

Is the mount the same for the 4.0L

Dude! This completely worked!!!! Thanks!

Hell yeah. You are the man. Thank you for putting this video up. 5 stars!!!

I wouldn't do this "easy fix." Instead, I applied J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Black - 25 ml on the cracked area and the rattle is gone. There are ton of KZbin videos showing this better option of easy fix. P.S Use a plastic tool to prevent damaging the car trim.

i replaced the intake and im still getting misfires and still showing its the manifold when getting scanned, ive pretty much tried it all. has anyone else had this problem?

That suxx

My mechanic replaced intake manifold, and I'm still getting check engine light! Any ideas what's going on?

I recently replaced my intake manifold with the revised one on my 09 mk5, no codes...for 2 weeks now its back......

Thanks for the video. Is that dang thing entirely made of plastic!?

It was ok about the maunt engine?

Thank you, sir!

omg it was this simple… i had removed my whole panel already breaking 2 of the connectors hahah. Hope others fond this vid before

This was an absolute life saver of a video mine just broke on the way home and I was really not trying to pull the door panel off, THANK YOU

please use plastic tools thees panels are expensive

BRO!!!! THANK YOU!!!! That was so annoying… Enjoying my music again ❤

Thank you so much! You might as well be an Audi technician 😂

Im having this code uuuggghhh i just put a new intake manifold on this thing still getting code

Shockingly bad quality. Would not happened on a D3 A8 and sounded much better too.

I know this video is a little older but here I am in 2023 and I have a 2016 Tiguan with 85K miles and the local VW dealership confirmed there is an extended warranty for this part. I'm taking my car in to have it fixed under warranty.

useful video !!! can you confirm iits OK to support the engine from below only ? like with a jack with a piece of wood on the oil pan ? would like to do this at home. Motor mounts are not throwing codes, but I gat a vibration/growl from the engine. Changed my driveshaft carrier for an HD one. Mounts were next steps to eliminate this ...

Thanks

did this for my 16’ audi a6, night and day difference, system sounds brand new. tysm ✌🏻 Bose speakers don’t blow people, this is probably the solution

Thank you man so much

Remove the flaps

Thank You so much this just saved me Some Money as I didn’t have to buy a subwoofer 😊

Thank You so much this just saved me Some Money as I didn’t have to buy a subwoofer

I got a quote on the speaker and is over 500 at audi dealer lol. This quick fix is for free lol.

Tanks on the Info how when can change manifold the car or Reason to change manifold

Thank you my man!! Works tits!!

I have this same problem that can’t be resolved. I have been driving after the oil change for a week then tried again to reset, and it is still saying Full Service can not be carried out. Does anyone have any solution. Thank you in advance for kind help!

Grinder

It works!! Thank youu

Where can I purchase this lock device? Are you interested in selling? Not the barrel but the device