People mostly do it for wheelies if your trail riding really no point

Where's the link for the controller you upgraded to ? I'd like to change mine to a more powerful sensorless controller to eliminate hall sensor issues.

Does it work till now without issues?

Can you please stop saying the brace goes on your “foot” seriously wtf are you talking about ?

For anyone who wishes to built something similar for themselves, it's important to get the dimensions right. For the balancing to be accurate, the balancer needs to be perfectly level and the axle needs to fit the wheel axle hole snugly. So make sure those two arms are exactly equal lenghts, and the bairings are mounted at the same spot. Once you have made one leg, use it as a template to drill through the pilot holes you made for the bairings, so you copy it down on the other leg.

lmaoooo is that ann road powerline trails?

5 litre su ekliyorum ama camda göremiyorum

Wtf 😂 can't see what you're doing ya wab

Had no success with my Triumph 2008 Bonny. With all adjustments perfect, sure the lever is easy to pull but the actuator at the clutch end only moves 14mm now. Without the device it moves 18mm and that extra 4mm is what dis-engages the clutch better for minimum clunking into first and easier changes. Someone will no doubt say my adjustment is wrong but this is what levers do. Easy to move but at the expence of distance.

that knob is excellent, where can I get it?

Moen Cliffs

what grit sandpaper???

I have a 2024 DRZ400S that doesn't even have a kickstarter. But I kind of wish it did. It's electric start only.😢

I started racing on a kx60, i never had an issue using a clutch

It's double the viscosity of most other so, it's "concentrated" oil

I purchased the Surieen R134A AC Recharge Hose with Gauge and BPV31 Bullet Piercing Tap Valve Kit. I installed the bullet piercing valve with no problem and it is functioning properly. After that I screwed on a new canister of 134a refrigerant to the recharge hose & gauge. I punctured the 134a canister with the screw T-valve. The problem I'm having is that when I open the T-valve to release the refrigerant, no refrigerant will come out of the recharge hose exit end. I then attached the 1/4 to 1/4 Adapter with valve core and still NO refrigerant will exit the recharge hose. I checked to make sure the refrigerant canister has been punctured by unscrewing the T-valve, refrigerant does escape. So I know that is functioning correctly. Please tell me what I'm doing wrong. Thank you

Dane Forges

Miss your videos...thanks.

If you put the balancer on a lathe, you will see that the inner cave, where the pin goes, is NOT centered. You must simply regroove the cave and adjust the bubble.

Informative and very well explained, excellent video!

I use Supertech oil & tranny fluid.

I'm putting an engine guard on . I busted mine but Jerry rigged and got home

Garcia Larry Walker Shirley Jackson Daniel

Kickstart is a lifesaver and this manufacturers take it all away. All brands do it that right now😔

You just said power off then I see the fan running all on a sudden. What did We miss.

My question is my Infiniti has two engine air filters. I'm missing one because one got damaged and I placed an order on Amazon for the next day. Is it OK to drive? Just maybe 5 miles without a missing air filter in the city, there's not that much dust or debris just typical Chicago city air in the fall. I know it's not good, but I don't have a choice until tomorrow, so I will try to drive for less than 10 minutes. Do you think that's OK and won't do much damage

miss the old yz videos😢

58 is for hills and single track, put a smaller Than stock if you wanna ride just flats n go faster ?

What is the name of the special hose

Life saver. Thanks so much for this helpful video.

Thanks pal. Fitting mine tomorrow in my xt

Add some 1amp active balancer or equalizer. And you can add a wake up button. A momentary switch will do a magic SWITCH SHORT THE P- AND B- from the bms and just press the button for 5seconnds or less everytime your bms will go to sleep

sounds like Christopher Walken

I had a yz250 and it felt great on trails for me only thing its a 2 stroke and vibrates a bit more than a counter balance bike I weigh 200lbs and stock suspension is fine because it’s softer I don’t do no crazy jumps just woods riding and single track also hill climbing and I’m thinking of picking up a new tbi 250sx all e start I believe and u can tweak the suspension for woods riding

YOU DIDN'T PURGE THE HOSE

Thanks bud you saved me a bundle! Some fridge tech was quoting me 400 bucks to recharge my freon! 🤘

Hi don't know if you still reply as it's a old video but I'm following your guide to add one to my motorycle. I only have one ac wire going into my headlight loom on the rectifier are both ac poles inputs for ac or is one ground

I got probably the same unit but im confuse a lot, if rs 485 connected to the inverter, then ct - in is connected to the probe? But how about ac input do we connect with power outlet? Thanks in advance

Video is epic

is it only for trail? or you can install it on a heavy bike for a soft clutch?

Thanks for inspiration! Although, I do not understand why the bench needs wooden backstop legs attached? This type of hydraulic lift already has a build in backstop mechanism from metal. The middle layer could be thus omitted.

dude, luv your enthusiasm but it would've been nice if WE could SEE the bluetti display instead of a blinding sunlight reflection we cannot see the specs you are pointing at SMH lol

where can i get a battery I have this same exact bike and wana make sure im getting one tht fits the ports and everything can somebody share a link or help in anyway?

Okay I have most figured out. I need more detail on how to install the wires into the plastic clips especially under the airbag - it seems like there is not a release on the clip (blue wire) below the air bag

thank you for this very informative and easy to digest content. im watching 5 years after the upload and this is video is more informative than others. thanks a lot

It's the best motor oil out there. But I change it every 5,000 miles. My vehicles are still running

you can get cheap full synthetic as well. Not a bad idea if you plan on keeping the car for several hundred thousand miles.

Thank you. My mini bike chain locked up and this help me fix it and get back to riding. Ur the man

I know what I want for Christmas

Its all about the riders not the bike its only a 20%