Thx for good info with some humour in between. Nice man
@chickentuber3 күн бұрын
I'm sure 2WDW made it richer which would make the popping worse. A flapper valve delete kit (block off plates) should fix that. They tuned my zx4rr but that bike is restricted and def benefits from a flash. But I agree tho for the ninja 500 you'd be better off putting that money into stiffer fork springs or something.
@SethmotoX3 күн бұрын
Yeah waiting on full exhaust system then I'll do block off plates and probably have them tweak flash once again that should get the bike where it needs to be.
@LaylaBailey-zw5ym4 күн бұрын
tires on that thing look nice 🔥
@syedgilani71086 күн бұрын
I would like to see more vlogs of you riding this bike.
@SethmotoX6 күн бұрын
Gonna be making some in near future.
@demonz78887 күн бұрын
Thank you for doing this bc I wanna do this to mine when I get my 500
@damienturk39118 күн бұрын
Makes no sense should have just bought a 600 cc
@SethmotoX8 күн бұрын
Sure you got double the money to lend me. I didn't think so either. If I had that kind of money I would've just bought the 6r. Lol
@Zankiz5 күн бұрын
go ahead and get that 600cc. I’m sure you will have fun paying for insurance or dads gonna have fun paying insurance
@Qrides8 күн бұрын
I’ve been wanting to do this to my new ninga 500
@SethmotoX8 күн бұрын
Send it. Just make sure you do all the mods and not just the flash.
@bradleybeck16518 күн бұрын
Where did you get the tinted wind shield? I’ve looked all over but can’t find anything
@SethmotoX8 күн бұрын
It is actually for the 400s. I could not find a tinted one for the 500 myself. But found this one and folks in comments were saying it will fit 500s as well and it did.
@Jason-ip6wq8 күн бұрын
Why not just trade the bike in for an inline 4 600cc instead of ecu flashing a 500?🤔
@SethmotoX8 күн бұрын
And pay over double for the 6r then what your gonna pay for the 500. If I had that money I would've went ahead and bought the 6r.
@ac2-rm1418 күн бұрын
@@SethmotoX Correct analysis. Plus the insurance on inline 4 supersport is insane.
@Zankiz5 күн бұрын
Because you can track the 500 and if dropped not feel bad compared to a 600cc inline 4
@sicxdgixxd63269 күн бұрын
Funny how you got down behind the wind screen and didn’t go anywhere, 500’s suck
@MrJamjammers8 күн бұрын
Well considering it's an entry level bike what did you expect? You don't really need anything more than that for the street.
@SethmotoX8 күн бұрын
I just lowered my head a little so my center of gravity was forward under acceleration. Also wasn't even full throttle. Bike is super quick just not fast.
@DylanFoos8 күн бұрын
@sicxdgixxd6326 Sale numbers say differently bud.
@SethmotoX8 күн бұрын
?? Sale numbers say differently?
@DylanFoos8 күн бұрын
To sic….
@corteezyrt9 күн бұрын
Do you know shipping method they used?
@SethmotoX8 күн бұрын
Overnight threw FedEx I believe it was.
@millejansson47999 күн бұрын
I own a ninja 500 myself, ngl the stock mirrors look gr8 imo. real sporty
@entropy51259 күн бұрын
From what i seen from there video. You really need a full header and velocity stacks to make power
@SethmotoX9 күн бұрын
Yes this is correct. I did not have a full exhaust system just yet. Not sure if I will get velocity stacks though. From what I've seen you get pretty my ch nothing as far as performance goes.
@IndependantMind16810 күн бұрын
That's a pretty nice bike.
@vellevlogs346710 күн бұрын
How is your GoPro and microphone set up and what’s the settings? I can’t get my mic to work with my GoPro at all😭 I have the hero 10 and the panda microphone
@SethmotoX10 күн бұрын
I use a media mod to plug the 3.5mm Mic jack. I use both a panda as well as a standard PC microphone with a condenser on it. Just depends on which helmet I have on. Different setups in different helmets. Everything I use is down below. 👇 GoPro Media Mod (HERO11 Black/HERO10 Black/HERO9 Black) - Official GoPro Accessory a.co/d/0dtkz2sN Mini Microphone Condenser,Omnidirectional Flexible Head Vocal Pickup Audio Amplified Equipment Standard 1/8 Inch (3.5 Mm) Aux-in Audio Jack a.co/d/07bJcNTT Purple Panda Lavalier Lapel Microphone Kit - Clip-on Omnidirectional Condenser Lav Mic Compatible with iPhone, iPad, GoPro, DSLR, Zoom / Tascam Recorder, Samsung, Android, PS4 a.co/d/03SjKF9U
@vellevlogs346710 күн бұрын
@@SethmotoX thanks bro
@SethmotoX10 күн бұрын
No problem. Let me know how it works. I just used a little Velcro inside to helmet to hold mic in place as well. Wrapped a little piece up around the mic then some inside my helmet where I wanted mic if that makes sense.
@NinnjaSquid9 күн бұрын
@@SethmotoXim curious how you get the pc mic to work??? Like how do you run it through the helmet. I have a modular helmet and it’s been a pain
@SethmotoX9 күн бұрын
Not sure on a modular. I run an LS2 Assault and I just go from GoPro mounted on chin if helmet and the plug 3.5 straight to media mod and run it under chin and into helmet and Velcro it in front of my mouth.
@michaelzimmer868510 күн бұрын
Dude, you’re not gonna get any real results without putting a full exhaust system on too the flip one is purely for sound
@SethmotoX10 күн бұрын
Your unfortunately not going to get anything with a full exhaust either. From w slip on to a full exhaust your only get anywhere from 3-6 more HP which your not going to be able to tell while in the seat. Will be getting a full exhaust system just simply didn't get one prior to flash.
@michaelzimmer868510 күн бұрын
@@SethmotoX well you’re gonna have to get it flashed again then because your air fuel ratio definitely gonna be different with the full exhaust system
@michaelzimmer868510 күн бұрын
@@SethmotoX and you’re right it’s only about a 5 hp increase but you’re also losing about 11 pounds worth of exhaust parts. You don’t need. It’s all the little things that add up bro but you’re right it’s only a 500. It’s not a liter bike.
@SethmotoX10 күн бұрын
Yeah if I get a liter bike I would do it 100% but I was simply just trying to wake this little guy up is all.
@michaelzimmer868510 күн бұрын
@@SethmotoX same bro that’s why I watch the video. I’m ordering the full exhaust tomorrow and sending my flash to two wheel. Dino works on Monday.
@eatingelizabethsfrizbee10 күн бұрын
Did the mid pipe come with it, or did you have to order it separately 🤔
@SethmotoX10 күн бұрын
The mid pipe came with it. The mid pipe is purple now from the heat. Lol
@eatingelizabethsfrizbee10 күн бұрын
@@SethmotoX Amazon? how much?
@DanShuster-o5x10 күн бұрын
Is the AIS blocked off?
@SethmotoX10 күн бұрын
It is not. Once I buy a full exhaust system I will block AIS and have it tuned once again.
@dshuster7310 күн бұрын
@@SethmotoX I'm not an expert by any means but I installed AIS delete plates on my Ninja 1000 (with a slip on) and my R6 (full exhaust). I stuffed a couple of marbles in my CB1000 AIS and all of them stopped the decel pop. All bikes are different in some way but it may be worth the cost of a couple of marbles to give it a shot.
@georgemcpherson37069 күн бұрын
if you block it off and you still have your catalytic converter you will burn it up, so leave it alone until you get a full exhaust.
@SethmotoX8 күн бұрын
Yes this is why it is still on at the moment and will block them off at a later date once I install full exhaust system.
@Minerror5932410 күн бұрын
That looks awesome. I can't wait to get my hands on my new white ninja 500.
@SethmotoX10 күн бұрын
Appreciate it. Hope you can get yourself one soon.
@Posajdin10 күн бұрын
From what Ive learned in terms of research; coupling an ECU flash with a full exhaust kit is the best way to get the most performance. 2WDW has videos up with graphs of coupling the two and the most difference is seen in the 7-9k rev range (mid range) and if you wanted a few extra ponies in the top range, 9k+, you want to add the velocity stacks. I agree though, in terms of just having a commuter bike with no plans of tracks or twisties, aside from highway pulls.. you don' t really need the ECU flash. Even coupling the exhaust kit, with the stacks, with the flash.. its not needed for regular commuters. If youre looking for a good full exhaust that couples well with 2WDW flash look into the Leo Vince Factory S Full Exhaust Kit. My plan is to hit the trifecta because I plan to keep my 500 for a long while. Allegedly getting all 3 mods done can boost HP up to 10+.. more than enough for a casual rider like myself.
@SethmotoX10 күн бұрын
Yes this is all very true. Even with all those mods at once your not gonna feel much in the seat anyways. Just experimenting with this stuff just to see what it will do. Will be getting a full exhaust here soon to try it out.
@xELITECHEERIOS8 күн бұрын
@@SethmotoXthats completely wrong you’ll definitely notice a difference with those mods ive done it on 2 bikes so far and every time it completely wakes up the bike and removes alot of the factory limitations they put on either for emissions or to chill the bike out responsiveness is off the charts compared to stock and at least on 600s it adds a ton of low end torque i haven’t done it to my aprila rsv4 yet so idk how itll react with that exactly
@SethmotoX8 күн бұрын
Lol we are talking about 2 completely different bikes. Had you watched the video what I said was "I can't speak for bigger bikes." Sure it makes sense it changes a bigger bike with all the Mods at once. This is just a 500 technically a 451 and theres not much to improve as far as performance. Yes the bike is a little more responsive now and as a little more juice on the top end. But it's not going to be all that noticable. The bike is still going to be a 451cc at the end of the day. I'm glad they helped your bikes out though.
@xELITECHEERIOS8 күн бұрын
@@SethmotoX I don’t think you realize it doesn’t matter if it’s a bigger bike or not your gonna notice a 10% gain in power according to dyno sheets a stock 500 with just a tune and no mods will gain 7% in power and with a full system, sprint filter and velocity stacks it shoots up to 13% it doesn’t matter what bike it is you WILL notice that difference you ain’t gonna break lap record but you’ll definitely notice and improve your PB plus like I said the responsiveness of the throttle will completely change with how manufacturers limit throttle inputs
@SethmotoX8 күн бұрын
LMAO I see you don't read comments either. Fair enough. You literally repeated what I said other than I said I don't know about bigger bikes but if it did it would make sense as they are bigger engines and such. Again as far as this bike and what I can speak on your not going to feel MUCH. Sure your going to get more out of it and the bike is going to wake up. Hell you better if you pay some money for it. But it's not gonna be a crazy amount like you can get out of tuning a car. That's all I was saying.
@sexthendrugs10 күн бұрын
What phone mount did you get?
@SethmotoX8 күн бұрын
Quadlock with the wireless charging.
@JessicaSimonson197611 күн бұрын
I heard bad stories from people who done flashes and said bike performed poorly afterwards. This make me Leary of ever doing it on my bike.
@SethmotoX10 күн бұрын
I'm haven't had any issues at all other than a slight imbalance in my fuel to air ratio. Other than that I just simply didn't really get anything worth the $200-$300 you pay for getting your ECU flashed.
@JessicaSimonson197610 күн бұрын
@@SethmotoX I read so many of these places screw up fuel ratios that times people have to pay again somewhere else to fix it.
@Uncle_FOE_50410 күн бұрын
Yea I’ve heard the same
@Niobium238 күн бұрын
Go to a good company like 2WDW, and it’s not a worry. They stand behind their work and test every flash.
@levelupwithsam11 күн бұрын
Looking forward to see how the Ninja 500 handles with a tune from 2WDW. Are you getting a full system exaust too or just a slip on?
@SethmotoX11 күн бұрын
I am going to be getting a full exhaust system for sure. Not sure what kind. Looking into some now.
@levelupwithsam10 күн бұрын
What about engine breaking and on-throttle response? Stock engine breaking is very strong and on-throttle can be a bit jerky.
@SethmotoX8 күн бұрын
Engine breaking is the same. I didn't see much change in that category. As far as throttle it's a bit quicker to the touch but jerkyness is gonna go away with more time on the bike. At first I noticed that but then made adjustments and learned the throttle a little better and I don't get the jerkyness anymore.
@levelupwithsam8 күн бұрын
@@SethmotoX I think you'll only feel the tune above 110mph on 6th gear, where the bike tends to lose power in the 9k+ RPM range out of the factory. Should make for an exciting 2nd and 3rd gear experience when giving full throttle on a long, straight road.
@CrunchDramaNetwork11 күн бұрын
What slip on are you using? I just bought one off Amazon . It hasn't come in yet. Hopefully it'll be fine
@CrunchDramaNetwork11 күн бұрын
Never mind I remember the video you made using the Istunt
@CrunchDramaNetwork11 күн бұрын
Do you know if the 400 fairings are the same as the 500? I want to order some custom fairings but only seeing 400
@SethmotoX11 күн бұрын
Yes the fairs for 400 are same as 500. The bike is basically identical to 400 just changes to engine.
@CrunchDramaNetwork11 күн бұрын
@SethmotoX that's great news thanks bro! I asked the website and they never got back with me
@Zankiz5 күн бұрын
@@SethmotoXThey are not the same fairings. They are different.
@Zankiz5 күн бұрын
@@CrunchDramaNetworkThey are different fairings.
@CrunchDramaNetwork5 күн бұрын
@@Zankiz thank you. The site got back with me and told me they are different. Guess that sucks 😆 🤣
@brandonk593211 күн бұрын
What muffler is that? How do you like it?
@SethmotoX11 күн бұрын
I posted a video on it if you wanna check it out. Link is in description as well for the muffler. kzbin.info/www/bejne/rHXMiGujeJd-rdk
@WoTown-Raider12 күн бұрын
sounds good
@SethmotoX11 күн бұрын
Appreciate it.
@the404man13 күн бұрын
Is your bike an ABS? If so, does the brakes make a weird noise? Went out today without helmet and heard the, what sounds like the front brake making a loud, kinda like fast clicking sound when applying.. Im guessing its the ABS, but not sure, can not find anything on google about the sound, i thought of you, couldn't remember if yours was an ABS or not.. Thanks
@SethmotoX12 күн бұрын
Mine is ABS. Honestly I haven't heard anything like that on mine. I had to mash the brakes twice now and even then I didn't hear a sound.
@uh60rider200015 күн бұрын
I just bought the exact same bike, color and all. I'll probably pick one of these slip-ons up. Thanks for the video
@SethmotoX14 күн бұрын
No problem. You will have a blast on this thing. Ride safe.
@darisgonzales205615 күн бұрын
JUNE 27 🇵🇷😳
@darwinmauricio908317 күн бұрын
Informative, tnx
@CrunchDramaNetwork18 күн бұрын
I got the black one!
@SethmotoX18 күн бұрын
How are you liking it so far?
@CrunchDramaNetwork18 күн бұрын
@SethmotoX I love it! I'm very new to riding. I got 80miles experience 😆 🤣 but I'm getting better each time I take it out. The very 1st time I hit 50mph I thought I was going to fly off the bike. I also almost whisky throttled the 1st week trying to Rev match , which is something I shouldn't have even tried. So far I installed frame sliders and a tail tidy. I got a slip on exhaust ordered that should come in, a couple of weeks
@SethmotoX17 күн бұрын
Nice man. Be careful on that thing. Have some fun with it. It's a blast for sure.
@Torean_18 күн бұрын
Thanks for doing a side-by-side at the end. Great video man, can't wait to see more!
@SethmotoX18 күн бұрын
Appreciate it.
@tsdmoto18 күн бұрын
Thx for the install video, nicely done
@SethmotoX18 күн бұрын
Appreciate it. 👍
@KingJerbear23 күн бұрын
The adjustability is nice for the levers I suppose but you loose so much leverage... looks like it's almost 2 inches shorter! Not sure I'd feel comfortable with that
@SethmotoX23 күн бұрын
I can see where some may have a problem with that. For me in particular I only use 2 fingers to pull both the brake and clutch anyways. It works perfect for my style on the bars. Some use all 4 fingers in which you can't do that with these levers. But it's all about what makes (you) the rider more comfortable.
@JessicaSimonson197623 күн бұрын
Blade mirrors are useless.
@SethmotoX23 күн бұрын
These indeed do not serve much of a purpose.
@OGTheNothingMan22 күн бұрын
Yep, I put it ON rode for like 50kms and took them off and returned them. The most useless part ever built. It's a scam😂😂
@ashirkhizer258018 күн бұрын
Yeah..but they look cool
@GlennSinyo18 күн бұрын
@@ashirkhizer2580way cooler without it😈
@jeffmungai449423 күн бұрын
I got the same bike although where’d you buy the black visor
@SethmotoX23 күн бұрын
The windshield is for a 2023 Ninja 400. It's not the exact same one thats on the 500s originally but it fits it's just a little different of a design. I have a video on it check it out and link is in the description of that video for the one I purchased.
@mylwnas553323 күн бұрын
I like the modifications,i have the same bike i want to change the license plate holder but im not sure what to get to fit the screws ecaxtly
@SethmotoX23 күн бұрын
Look into 2023 Ninja 400 fender eliminator kits They make plug and play kits that fit the 500 even though they say 400. It's practically the same bike.
@christineburnell46923 күн бұрын
How do you like those levers? Are you going to keep them?
@SethmotoX23 күн бұрын
Most definitely going to be keeping them. Much much better than the stock ones.
@CrunchDramaNetwork18 күн бұрын
Yep I put a 400 tidy on mine. Worked great
@eatingelizabethsfrizbee10 күн бұрын
I got one for a Ninja 400 from Amazon for 35.00 dollars it worked great.
@CrunchDramaNetwork25 күн бұрын
Did you have to add or buy anything extra?
@SethmotoX24 күн бұрын
I did not have to buy anything else.
@CrunchDramaNetwork25 күн бұрын
Got the same bike in all black, how's that exhaust sound?
@SethmotoX24 күн бұрын
Honestly I think it sounds phenomenal for the price point. I think it sounds just as good as these expensive slip-ons and full exhaust kits on the market.
@CrunchDramaNetwork24 күн бұрын
@@SethmotoX nice I'm gonna check into it
@Yerocco25 күн бұрын
This color and the red and black are so solid. I just sat on a few over the weekend. Definitely getting one soon lol
@SethmotoX25 күн бұрын
You won't regret it. This thing is a blast.
@Yerocco25 күн бұрын
@@SethmotoX I’m just waiting on the dealership to hit me back lol.
@eboz321327 күн бұрын
$100 to lose like 24lbs in weight is probably the best upgrade you can do.
@SethmotoX26 күн бұрын
Lol it wasn't exactly 25 lbs but it was much heavier than the aftermarket exhaust for sure.
@ThatxboyxNathan29 күн бұрын
How would you rate the installment? 1 being the easiest to 10 being the difficult. I also too recently purchased my first bike 2024 ninja 500 se and I don’t really know much I’ve been searching the web to looking for the best fender eliminator. Do the come with instructions
@SethmotoX29 күн бұрын
Honestly is wasn't necessarily hard it was just tedious to install as it wasn't a plug and play kit. I would say a 3ish for the install. The outcome I'm completely fine with. You can't tell it wasn't a plug and play kit.
@SethmotoX29 күн бұрын
It did not come with instructions at all.
@ThatxboyxNathan29 күн бұрын
@@SethmotoXI appreciate it so much can’t wait to see more content of yours
@ThatxboyxNathan27 күн бұрын
@@SethmotoX so I did mine today and you were not kidding about it being tedious the only thing that doesn’t work anymore are my hazards my break and single lights work
@SethmotoX26 күн бұрын
That's interesting your hazards don't work but your turn signals do. I hope your able to figure that out. Seems like it should be an easy troubleshoot. I didn't have any issues with hazards as they worked fine.
@whitewolfdojo8259Ай бұрын
Sounds great. Just ordered one!
@SethmotoX29 күн бұрын
I don't think you will be disappointed.
@GhadSpeedАй бұрын
Bro i just got my exhaust over the weekend and maaannn i love it. I took the baffle out cause i wanted more of the deep grunt it puts out plus the back gurgles is astonishing. The rubber seal that holds the clamps is ass though it flew away during highway riding lol. Easy fix. I just slapped on some high temp tape to hold it securely. Keep up the good content my guy.
@SethmotoX29 күн бұрын
Appreciate man. Glad you got you an exhaust. I'm sure it sounds great. Ride safe my friend.
@mcgirtICrealityАй бұрын
That ain't no 20lbs bro! Can't be, I'm weighing mine right now.
@SethmotoXАй бұрын
Lol figure of speak man. Prolly more around 10-15 lbs compared to maybe 4-5lbs for the aftermarket exhaust. Let me know how much it weighs.
@CptRabidRabbitАй бұрын
Looks slick good video for visuals on bike been considering mirrors myself so this helps
@paschalmg2523Ай бұрын
How much did you pay for you bike all total?
@SethmotoXАй бұрын
7.5k OTD.
@garydonaldson-yc8sp20 күн бұрын
Nice bike and upgrades.How much does this bike weight also can I get heated grips will be getting my ninja 500 soon 2024 same exact color as yours or do they have it in red optional warm seats as well
@SethmotoX19 күн бұрын
Bike weighs around 350lbs. Does not come in red that I know of and I believe you can get aftermarket heats grips for any bike really.
@trullmannАй бұрын
w/out sounds pretty good!
@SethmotoXАй бұрын
It does for sure. Messes with the back pressure to much though unfortunately. Pops a little to much.