David Armenta

Пікірлер

@zac.bolin01 4 ай бұрын

I think when my motor goes out I’m gonna get a 140 too

@zac.bolin01 4 ай бұрын

This bike looks almost exactly like the Apollo rfz

@zac.bolin01 4 ай бұрын

Different frame and gas tank and seat it looks like but all the rest of it looks exactly the same

@zac.bolin01 4 ай бұрын

Yep on my bike there’s pretty much no first gear. Once you get moving you have to shift to second

@BetasigmaSSRalt 4 ай бұрын

Can you link the engine and how fast can it go?

@BetasigmaSSRalt 4 ай бұрын

Can you link the engine

@sicksour7791 4 ай бұрын

I use brake grease on my slides and the slide pins too! Just be sure not to get any on the rotor and if you do blast it off with brake kleen. Really good video!

@Morcego538 5 ай бұрын

how do you measure the brake pads and break levers and brake tubes to order them online?

@CIA_Alien 5 ай бұрын

Nicely done David! Love your shop!

@davidarmenta4812 5 ай бұрын

@@CIA_Alien thank you so much. We recently moved actually and I made sure the workbench came with us to our new home!

@IamAdrian88 5 ай бұрын

Great video

@davidarmenta4812 5 ай бұрын

@@IamAdrian88 thank you!

@sirbrad2336 5 ай бұрын

Get a new hobby.

@davidarmenta4812 5 ай бұрын

your right ill state watching old KZbin videos and leaving comments

@Ralphescobar_ 6 ай бұрын

Can somebody help me with mines my starter broke off

@corywilson1488 7 ай бұрын

Where can I get the chain adjustment screw u have

@davidarmenta4812 7 ай бұрын

im not too sure possibly eBay or tbolt usa I believe its called a chain tensioner screw

@edwincorrea945 8 ай бұрын

Good thing for CC. Turn the garbage music off, or turn it down so your voice isn't combatting all the extra sound. Other than that, I'm glad you made the video on the light installation. Very helpful.

@michaelsaint7325 9 ай бұрын

Amazing retro fit I bought a Works motor high performance engine from a company t-bolt USA that guy Vince really knew his stuff they build an engine for me complete I didn't have to do anything except install it even the wiring system was hooked up completely even the kill switch CDI coil carburetor with Janet all I had to do is add fuel two bolts sprocket and chain exhaust system and I was up and running in their time keep up the great work enjoy your videos Carlos in San Diego sent me

@rickyviramintes9567 10 ай бұрын

Are the wires all plug-and-play?

@NoahBeran 11 ай бұрын

At 2 minutes in that silver tube thing in the caliper I pushed like half an inch out so I can’t take out the retaining pin what can I do

@kelleeb7823 Жыл бұрын

Looks like my 7th grade shop class on a day when the teacher called in sick.

@davidarmenta4812 Жыл бұрын

haha when the cool substitute teacher came in and started showing the kids some real stuff haha!

@bboyjunkee Жыл бұрын

You da man

@davidarmenta4812 Жыл бұрын

Thank you!!

@bigsmith573 Жыл бұрын

I’m doing the same thing to my thumpstar tomorrow. Cool video man!

@davidarmenta4812 Жыл бұрын

Super exciting I hope it goes smooth and the video helps you!!

@nicolehernandez1501 Жыл бұрын

This is one of the best if not the best video I’ve ever seen to swap a engine thank you so much

@davidarmenta4812 Жыл бұрын

Thank you so much! I hope it helped you! when I was first taking on the project I noticed that no one had a good video so I was determined to make one!!

@Rippinandfishin Жыл бұрын

how hard was the cdi to hook up?

@davidarmenta4812 Жыл бұрын

it should just be one plug under the seat

@whitewolff3802 Жыл бұрын

What is that song bro

@JR-gd7pg Жыл бұрын

Good onya lads. Great bench. Solid and I bet it’s working a treat. Well done 🙌

@freezerburn04 Жыл бұрын

I’m a bit late to the party but thought I’d mention pulled tube stems is from low air pressure. Keep it over 25-30psi and you’ll be good. Cool vid, thanks 🙏

@davidarmenta4812 Жыл бұрын

Thank you so much I read on the forums years back that you should run no more than 15 psi I think I run my car at 35 So idk if my tubes could handle 25-30

@freezerburn04 Жыл бұрын

I hear what you’re saying but my point was that the rim can spin inside the tire when under inflations has occurred. Especially if your gearing is low. This will invariably rip the tube stem off:( There should be a psi rating on the tire just try to be close to it👍👋 ‘Freezer

@davidarmenta4812 Жыл бұрын

@@freezerburn04 good call I might just try it I mean what's the worst that can happen my valve stem rips off 🤣

@MerkMonarchX 4 ай бұрын

@@freezerburn04 or get a rim lock

@MerkMonarchX 4 ай бұрын

@@davidarmenta4812 rim lock is what you really want

@wallm30 Жыл бұрын

Hey thanks for posting this, just wondering can i lub my air filter with wd40

@davidarmenta4812 Жыл бұрын

I probably would just get the K&N recharge kit from an auto zone

@bmwvillan Жыл бұрын

Hey I have a ssr125 fully auto and want to swap it with that same 140.. Can you convert it to fully auto?

@davidarmenta4812 Жыл бұрын

im not sure I think it wouldn't be worth the bother

@kingkong81icloud Жыл бұрын

Your better off buy a cheap stolen an recovered KDX or Yamaha DT125R, I had a pit bike like that was a money pit , I snapped my chain , and spokes in back wheel

@davidarmenta4812 Жыл бұрын

In the video I show the things you need to change and the chain was up there I had a no name bike when I was in high school the chain snapped and hit my stator cover and stator that was expensive to fix because I had no idea how to do so. The spokes have been a pain they need to be tightened correctly or the true of the wheel is off. they are not for everyone but so are bigger bikes. I feel like the maintenance on those is far more than these.

@kingkong81icloud Жыл бұрын

@@davidarmenta4812 yea everything that happened to you happen to me ,

@douggoff5784 Жыл бұрын

I've had the chance to use this table a couple of times now. It's fun to whip out in front of people:) I can see what people are talking about when they say the legs are delicate, but they're design to support a "mostly" vertical load, not be torqued from the side or pushed back into place. If you just let the table open or close on it's own and don't force anything, it works great kzbin.infoUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh Once it's set up, it's pretty solid. My only gripe would probably be related to the clamps provided. They're not the highest quality. They do the job, so no big deal, but they could be better. All in all, pretty cool gadget.

@davidarmenta4812 Жыл бұрын

thank you so much im so glad these did the trick for you! its definitely a mash of a few designs to get this one to work but I absolutely love it and hope you do too!!

@danstaszko6930 Жыл бұрын

So all I need to add a light to my ssr is a rectifier and a light?! It's that simple?

@axceler8t Жыл бұрын

finally a tutorial of someone building a workbench without having a workbench prior. Thank you. Subscribed.

@lucasorourke8759 Жыл бұрын

Could I add a tail light to the same wires as the headlight or would I need something else

@romanokun1547 Жыл бұрын

tHE WHOLE BIKE IS NOT EVEN SSR ANYMORE

@davidarmenta4812 Жыл бұрын

Damn Right lol

@Baseballedits711 Жыл бұрын

I have replaced mine and the brake pad inside fell out UGH just got them on too. Not sure what the deal is. The rotor seems far away when I try to tighten the bolts and bolts seem too short??

@davidarmenta4812 Жыл бұрын

I'm sorry to hear that did you make sure you bleed the lines did the brake feel soft

@Scrunchychingo Жыл бұрын

I live out in the country. But not really interested in going “off-roading”. I’m just looking for something to ride in the ditches down to the local convenience store to get a soda or stuff like that. Less than 1 mile round trip. Is this something I would be happy with for that purpose?

@davidarmenta4812 Жыл бұрын

100 percent and then some most people will buy those Colman bikes from tractor supply or sportsman's wear house for stuff like that and strap a cooler to the back

@josephhursey8899 Жыл бұрын

How much does the engine cost

@landonivey5811 Жыл бұрын

Him saying the worse thing you can do is ride with out back brakes. Me thinking how I bought by bike with out back pads and have rode it a couple of times