Your video was too short, save up footage of worthy content then time-lapse some of your job's for maybe a 15 min video?? I've subbed just wishing you the best! 😁👍 Nice to see such a friendly enthusiastic face!
@JulietteHallieКүн бұрын
@@redordead4491 I appreciate the input! it’s really a mixed bag with viewer retention… some people like long episodes some like the short ones. Some of my videos are longer but I try to keep the content diverse but keep each video to one subject. Most people get bored of just a Timelapse after about 15 seconds. It’s all a struggle to keep people engaged but also stay on subject but also show the actual work too. Constantly just trying things! 🤷🏼♀️ I’m sure a longer video will come up soon!
@redordead4491Күн бұрын
@JulietteHallie sorry if I offended you.
@JulietteHallieКүн бұрын
@@redordead4491 not offended at all! :)
@mariebernard-p5h2 күн бұрын
Tanks
@ItbS2k043 күн бұрын
Can confirm it cost me well over 4k to fully build my f series to an f24. I was gonna k swap but couldn’t part ways with the f. My Pockets are wishing I did.
@JulietteHallie3 күн бұрын
@@ItbS2k04 even a used F20c is over 5k. It’s insane. K24 swap is literally the cheapest and more reliable way in my opinion
@ItbS2k043 күн бұрын
@@JulietteHallieDamn right girl. But I’d love to run a k24 against my fully built itb f24 and see the difference. 👍🏻
@conradfajardo88814 күн бұрын
Thanks for uploading. More uploads in the future ❤
@JulietteHallie4 күн бұрын
@@conradfajardo8881 more are scheduled!! Uploading every Friday!
@michaelnyden80564 күн бұрын
She will make some guy very lucky!
@JulietteHallie4 күн бұрын
@@michaelnyden8056 haha I think I got equally as lucky with my partner !
@robrenner911010 күн бұрын
Turbo it
@JulietteHallie10 күн бұрын
@@robrenner9110 😂😂😂
@conradfajardo888111 күн бұрын
❤❤❤
@conradfajardo888117 күн бұрын
Awesome rollbars on the NC. Been following you for the longest time. Hello from the Philippines 😁
@JulietteHallie17 күн бұрын
I love this roll bar! Thanks for keeping up with all my adventures!
@mintyzee300017 күн бұрын
Nice! Looking beefy
@JulietteHallie17 күн бұрын
I love how this roll bar looks!! But the install? ROUGH😂😂
@JoseYuri19 күн бұрын
My car shakes in the wheel area whenever i go over bumps. Is that shock stabilizer/struts/etc that need to be replaced? Watching these videos will save me THOUSANDS of dollars and I want to learn to take care of my '07 z4. Not even 80K miles on it yet.
@JulietteHallie18 күн бұрын
I’d check ball joints and wheel bearings. Or even bad tires can cause this.
@terraformingcats817519 күн бұрын
Does the BCM need to be programmed for the center Chrono cluster to work properly?
@projman215523 күн бұрын
Hey, if you need to roll the window down, do you need to re-attach the airbag to avoid the airbag light? Or is there a way to roll the window down without re-attaching the battery?
@JulietteHallie23 күн бұрын
I rolled it down without attaching it so it’s possible I just don’t know if it would cause a light or not
@mintyzee300025 күн бұрын
Sounds like your having as much fun as I am with cars lol project car hell!
@JulietteHallie22 күн бұрын
So many projects going on right now! It is crazy around here! BUT i am absolutely loving it .
@conradfajardo888125 күн бұрын
❤❤❤
@davidturk617029 күн бұрын
Great presentation. Didn’t see when you did it in the video, but I’d retract the pistons before removing the caliper. Especially, if you don’t have the specific tool to use after the caliper is removed. Using a wedge (e.g., large flathead screw driver), pry between the soon to be replaced rotor and the worn disk pad. I’ve also used a c-clamp with the worn brake shoe once the caliper has been removed.
@JulietteHallie22 күн бұрын
That is a great practice to have incase you find a frozen caliper!
@ramonphoenix2627Ай бұрын
I love it and i love you
@matt-ballАй бұрын
Can you speak to some of the wiring? Did you have to do anything special to make the cluster work?
@JulietteHallieАй бұрын
There’s a jumper harness. I have a video with all the parts and links on my channel
@UnboxmaniacMatersАй бұрын
How did you turn off the airbag light ?
@JulietteHallieАй бұрын
I didn’t. Just dealt with it
@davebarrow4460Ай бұрын
Do we know how to contact Black Flag customer service? Mine is less than a year old, and it's looking bad.
@JulietteHallieАй бұрын
I’d send them a message on Instagram if I was you! @black_flag_usa
@autoholic_tmАй бұрын
Nice video! Would be great if you weighed everything you are taking off the car and then everything you will put on 👍
@JulietteHallieАй бұрын
Ooo. I wish I had a better scale to do that! But we can compare stock weight to race weight!
@henrik1743Ай бұрын
@@JulietteHallie stand on a regular scale while holding the parts
@JulietteHallieАй бұрын
@@henrik1743 I would if i had a regular scale haha
@Migz_1Ай бұрын
Good evening, what bolts did you use for the flywheel?
@JulietteHallie22 күн бұрын
I dont remember off the top of my head but I think I used flywheel bolts for the K24 from honda
@squarrlАй бұрын
do you find your fuel gauge is inaccurate on the track?
@JulietteHallieАй бұрын
Sometimes slightly off. It isn’t easy to read or register when the fuel is sloshing around
@victorvladimirputinu1746Ай бұрын
Might have trouble hearing the exhaust… over the top of guys whistling at you. 10# x
@victorvladimirputinu1746Ай бұрын
Needs a dyno to get the new changes right. Then you will notice.
@bennyang8049Ай бұрын
@juliette hallie, any plans on doing a k-swap on the r-series minis? If so, will you and your dad do it or do you know of a shop that do k-swaps on non-honda cars in socal?
@JulietteHallieАй бұрын
I don’t plan on K swapping a mini. At this point it’s not really my thing.. r53 is reliable and zippy enough I don’t think putting a k is worth it. Maybe for a r56. But still not my thing at this point. I don’t know for sure if they would do it but Walshmo Racing in so cal MIGHT do it.
@Jonathan-qz9kdАй бұрын
Did you sell the r53?!
@JulietteHallieАй бұрын
This one is sold!
@PatrickEsquiojaАй бұрын
First
@Jonathan-qz9kdАй бұрын
Are all the track days like that? So different compared to the uk 😂
@JulietteHallieАй бұрын
No! This was just a special showcasing event !
@alonsodamian7597Ай бұрын
Promo-SM ✌️
@Ren200Z_MotoringLifeАй бұрын
i would just change new coil packs for a piece of mind, this so called smart coils dont have the best reputation and will cuase inconveniances here and there with all the heat cycles
@JulietteHallieАй бұрын
Agreed. I was planning on it but just wanted to get it up and going again soon to make sure all is Ok
@FATmenDRIVEtrucksАй бұрын
Toyota/Lexus tow rig> Sequoia being cheapest no one wants them lol
@JulietteHallieАй бұрын
My BMW has been great for the last 4 years. It happens to the best of them unfortunately! Eventually I’ll need a truck but for now this will do!
@conradfajardo8881Ай бұрын
Hello from the Philippines! ❤
@JulietteHallieАй бұрын
Thanks for the support!!
@mintyzee3000Ай бұрын
Glad you’re back on the road!
@JulietteHallieАй бұрын
Me too. I cannot afford the tow rig to be down
@johnnyle509Ай бұрын
Do you have ps or ac ?
@JulietteHallieАй бұрын
It has the stock Electric power steering but all AC was removed because it’s a track car. There is a whole series on this build and a playlist on my channel just of the swap videos if you’re interested in more breakdowns on the swap. I have a video talking about parts needed, going through resealing the engine, modifications to make everything work etc.
@kovanmerza7462Ай бұрын
Thank you and fair play to you for not rubbing your back end in the camera like majority of "car girl" channels 😅 video is purely about what the title says it is great job! 😁👍🏻
@JulietteHallieАй бұрын
Haha thank you! I think I am interesting and intellectual enough to not have to show off my body for views :P
@kovanmerza7462Ай бұрын
You are doing fantastic! A real car person and you just got a new subscriber.😁 p.s. im considering a z4 3.0i to start doing track days. How have this been in your experience?
@JulietteHallieАй бұрын
@@kovanmerza7462 I loveeed my Z4! (My dad actually owns it now) It was great, reliable and fun. Its perfect if you want to do the occasional track day and if youre not going to compete. Reason I say that is (at least here in the US) there isnt a huge aftermarket modification base for these. I personally had aspirations to go further in a motorsports career which is why I moved on. But for a fun street car with amenities, comfort and track ability I would 100% recommend the z4!
@user-on3sk3xo6o2 ай бұрын
4 bars in not ok for s2000 you must see 3 bars
@JulietteHallie2 ай бұрын
Good news car is okay and has no over heating issues!
@user-on3sk3xo6o2 ай бұрын
@@JulietteHallie what has the problem is for overheat you find it?
@JulietteHallie2 ай бұрын
@@user-on3sk3xo6o from what I remember it wasn’t overheating this was just preventative maintenance because this is a track car
@danielw83022 ай бұрын
Is that 25 mm steel square tube section? my friend wants me to make one for him and I dont want to take any risks hahahahaha - also the front and rear holes on the main rails seem a little close to the end - in hindsight would you recommend leaving a little extra at each end? Thanks so much
@JulietteHallie2 ай бұрын
I don’t 100% remember but I believe so. I feel like by now someone makes seat mounts/rails for the f56. I’ve had these in for 5 years now with no issues. So I think it’s fine! :)
@nolahahnshouse33892 ай бұрын
Buckys!!
@JulietteHallie2 ай бұрын
Hahaha yes! I went last year had to get this hat😂😂
@ramonmcgee22402 ай бұрын
Are you changing the fluids according to a maintenance schedule or was there something about the performance that led you to change the fluids? I know you discussed it at the beginning of the video but I am asking whether the car's responses during driving tipped you off?
@JulietteHallie2 ай бұрын
Just to keep a maintenance record for myself plus with driving this car on track fluids will see much higher temperatures so I change my fluids more frequently
@andreatozzi41872 ай бұрын
hi, can you please tell me how to check the real km of a Mini using bimmercode or bimmerlink?
@JulietteHallie2 ай бұрын
I have no idea how to do that I’m sorry
@BJ-wo4mi2 ай бұрын
I k swapped mine and love it. Went with a 4piston k400, dry sump and ITBs. Completely different car now
@JulietteHallie2 ай бұрын
The torque is wayyyy better than the f20c!!
@ninozepeda74192 ай бұрын
You motivate me to k24 swap my s2000 lol
@JulietteHallie2 ай бұрын
I have no regrets!
@Mrhurtsdonut2 ай бұрын
beautiful car love the silver on the s2 my buddy has one same colour super clean looking and the hardtop just completes the look best of luck w ur car!
@JulietteHallie2 ай бұрын
Thank you! You either love Suzuka or hate it. Personally not a fan but it’s grown on me over the years
@NthngNbdy2 ай бұрын
Actual work starts at 4:06
@zacaryrobertson39952 ай бұрын
Wow, thank you for your discovery and hard work that allows for the rest of us to skip ahead to. God bless 🇺🇸🙏
@ryanclevinger24082 ай бұрын
But is the k24 more "fun" on the street and track?
@JulietteHallie2 ай бұрын
Since I like my car to run with out issues everytime I drive it ? Yes. Hahaha I’m kidding BUT I think the Vtec in the K is much smoother and sounds wayyyy better. I also like the torque much better for both a track and street car.
@martinalves49582 ай бұрын
Hi Juliette, I see that the previous lights are xenon one and the news not, is there any adaptation to do to remove the xenon system ? thanks :)
@JulietteHallie2 ай бұрын
Nope these were plug and play!
@lachcav98852 ай бұрын
Juliette your S2000 is so awesome.
@JulietteHallie2 ай бұрын
Oh thank you!!
@adrianquirino2 ай бұрын
and price for this??
@conradfajardo88812 ай бұрын
Make the wiring neat on the engine bay later ❤❤❤ good job!
@JulietteHallie2 ай бұрын
Yeah that’s my plan! Make sure all is well. Clean up is easy.