Now let's see the inner tie rod changed 👍😉

I just need to vent. I’ve never had an appliance I hate as much as this piece of shit garbage Samsung. I will never ever buy any Samsung anything ever again. I can’t wash a damn blanket or a single towel for that matter! I literally get so mad I’ve yelled at my wife about it and damn near ruined my marriage because this gawd awful garbage can’t be fixed! Not even a year old and I’ve rebuilt every part possible. Never have I had this much frustration over a junk ass appliance. Samsung can kiss my ass and if I could I’d put it in a box and mail to the president of that company … along with with a months worth of my neighbors dog shit in the box…and maybe the dog too if he doesn’t learn to shut up at 3 a.m !. It just kills me that Samsung knows they are crap and yet they still sell them to dumb Americans like me who apparently love spending $900 on a life shortening, frustrating piece of piss ass appliance. If I put one sock in it or a blanket, it will not spin correctly no matter what I do. I can’t figure out where to put the damn soap in either…it’s like they hid that. Even hooking the water lines up took me a full day just figuring that out. About the only thing decent about it was that it was easy to connect the cable box to it and the remote came with batteries. lol, end rant.

Is this the 3.6L v6? Sts Also you did not replace the one on the passenger side correct I was wanting to see it.

Thank you. Your video was spot on and very detailed.

THANK YOU!!!! This really helped me!

Thanks, It was the dumb nut!!

Best video that helped me thanks 🙏🏼

You got a lot of water into your attic by spraying along the top ridge which is a vent the whole length of roof.

Can this or the pcv valve cause oil in my spark plugs? Changed the valve cover gasket/tube seals and still getting misfires.

I cant find out how to calibrate a wa484dshawr/a1

00:19 recalibrate

Very helpful,thanks!

I have a back on my lap

That nut on the bottom is left hand thread so if it’s loose, tighten it by turning it counterclockwise

Thank you for this video. So clearly explained! Just wondering what kind of brand of tie rod was used. Is this repair also called "outer tie rod ENDS" repair?

What was wrong with the saddle valve?

Thank you SO much! I broke my mirror about a year ago and finally found a replacement piece at a junk yard! Searching for videos, this was the only one i found for my time frame (mine is 2014) and it worked perfectly! Thank you so much!

After doing the job, I get a a high pitched squeal from the driver's side for about 10 feet when I shift and move in Reverse. No squeal if I just shift into Drive and move forward. It happens whether the car is warm or cold. What might that be?

Thank you! This was perfect for my 2011 T&C. Nice and short. Got it done quick.

Wow im having the same exact oil problem and my valve look just like that. Please tell me this fixed it??

Awesome, thank you guys

Thank you! The year I needed a video for.

Our huge girl RR was 10 months old, when we brought her sister - same parents, 2nd litter - back home. Gret was the spitting image of their mother, so pup Hilde tried to nurse when they met. They got along great that day - until we went to bed, with the pup in Gret's spot. It was the 1st time she ever growled. They had a big sister/brat little sister thing going from then on. Full grown, they were 118, and 106 pounds. Wonderful lives they led, with both aging out at 12. We miss them all day, every day.....

Nice

Hello I’ve been scouring the Internet trying to find how to replace the piece before the mirror that little triangle piece any advice on how to do it, it would be appreciate.

Just a thing I noticed. When your son put that cotter Pin back in. I saw the nut spinning. It wasn't tight around 8 mins in this video. If you still have that car. You might want to check it. But other than that. Great video Father and Son :)

Pool shock. That's all you need.

What is the model # for the rods?

❤

What a joke.. Forgetting to show results.. “oh I forgot” wow.. waste of time.

i just learned something!! Thanks Dan!

Wagging the tail is not what you think. You are putting out shite information. Rosie is great. On top of that, you could put anyone in that room and have them give high-pitched vocal interactions with physical attention and get the same result. She would spin and act fired up no matter the human.

The video is great. Your commentary is not needed. ?

After 3 years my suspension rods went out. I replaced them. Wish I would have bought a speed queen.

Maybe cut the wire and re connect with Wago connector?

Your dogs are beautiful

It's the mirror itself fell off and have to put a new one on

Our Samsung washer was delivered & installed just two days ago!!!! It has a loose, springy tub as described in this video!!!! The machine would not go onto either the rinse cycle or the spin cycle. It would just STOP!!!!!!! At least we know what's wrong with it!!!!!!

Great video, I know have all the information I need to troubleshoot my machine, concise and to the point, love it

You are bad news telling people to scrub the roof that is Nuts you will ruin the roof doing that. Take this video Down!!!

How did you get the top agitator nut off. You said two hand but then jumped to using paint can openers

My washer has the 8C error code, we already replaced the MEMS sensor but it's still doing the same thing. It basically fills up with water, it's about to spin but drains the water, then does the same process about 2 other times before it starts washing normally.

Dude! Thanks to you I did this in 15 minutes!!!!😅

Just what I needed to see

I had a RR and am familiar with their speed, acceleration, their rough paws, their strength and was wondering if they had ever been used for sled pulling. Yours is the only I've come across that pulls sleds.

Thank you! I have a 2008 town and Country and all the other videos stop at 2007. This video worked on my 2008. I replaced it myself and I'm a 70 year old woman.

At 4:08 on an 07 will be harder than it looks after not changing it since 07 , in this video the father made parts looser so it's easier for the son to make it look easier to us as we watch this video of a 16 yr old fixing it. Sadly alot of videos don't tell the full truth of how it is in real life. I tried doing the part the son was doing at (video spot - 4:08) and it was super hard to do at home. If you bring your vehicle to a shop make sure you scratch a line on the metal parts that need to be fixed so when it's done you can see if it was replaced or not. FYI

My washer has been doing the UB error for almost a year now and I changed the rods and tightened the bult, but that didn't fix it. You're video is the ONLY video I found that taught me how to calibrate the washer and now it's running perfect. I feel so dumb but THANK YOU SO MUCH!!!! ❤

Thank you for sharing this, God bless.

How do you reset this machine?