So “CCV” filter can be removed “from what I’ve heard”… and like all cars prior to BS treehugger things it can vent naturally with the same “drip” line.
@BuyFixFlip13 күн бұрын
Exactly my 12 valve cummins just has a drip line that's it. Same with the egr all stuff to screw them up.
@davidrobinson635325 күн бұрын
Tanks a lot in the UK Has a jeep like yours only his has tracks it’s really good he is restoring it also. He has a KZbin channel called TANKS A LOT.🇬🇧🇬🇧🇬🇧🇬🇧
@markbasilotto202729 күн бұрын
I have questions about a kubota swap I wanna do to my yj is there a way we can talk so I can pick your brain
@BuyFixFlip27 күн бұрын
Join the kubota swap group on Facebook! And add me on there!
@allennundel6532Ай бұрын
also, 71 cis had a master cylinder access by the accelerator pedal. This one does not. Not a 71...
@allennundel6532Ай бұрын
71 jeep cjs had a fuel tank under the drivers seat. This one has a fuel spout in the back passenger side. this is probably a 73 or later.
@matthewb8229Ай бұрын
When you get women figured out, can you upload a video? I've been married almost 20 years, and I'm just as confused as the day I met her.
@BuyFixFlipАй бұрын
This is the best, I'm with you man clueless!
@bentull5789Ай бұрын
I'm swapping my 47 now. Did you regear the axles?
@BuyFixFlipАй бұрын
Stock 5:38s just add an overdrive if you need to.
@bentull5789Ай бұрын
@@BuyFixFlip nice. Thanks for the reply
@davebud5658Ай бұрын
That thing is awesome .
@rattybastardАй бұрын
Adjust your timing at idle and it should smooth out. Cool build, we have lots of diesel powered jeeps underground at the mine
@kenroberts2556Ай бұрын
great idea,ww2 had made a few duel axle supper jeeps. A guy in northern Ill.has the only one which was a ambulance.The referrence book pictures his super jeep one only.
@chancefluke7833Ай бұрын
Would a 1.9 TDI fit?
@keithhill9138Ай бұрын
If you ever have trouble with the mod 18 T case get yourself a model 20 T case. It has the big hole in the back because the 20 is a stronger case and the levers will fit the same.
@leadfarmer556Ай бұрын
Look out for deer. You really need a windshield at minimum. A roll bar. Yes
@RADIOACTIVEMASCULINITYАй бұрын
very cool!
@soweitsobitter9288Ай бұрын
What a treasure.
@marcusw86Ай бұрын
I love it! It looks fantastic, you definitely captured the spirit of the old Willie’s style.
@IanFrancisco-CAPianoman2 ай бұрын
I'm still trying to figure out the transfer case. 2x4x6 and the third lever does something for the front and rear simultaneously, plus separate driveshafts for each rear axle rather than tied together like a semi. Ingenious! All from one transfer case?
@BuyFixFlipАй бұрын
One shifter engages the front axle, one shifter controls high and low for the front axle and middle axle. The other shifter controls high and low for the rear-most axle.
@maxiflow86952 ай бұрын
Great job bro!!!
@UHO2212 ай бұрын
Mantap 👍👍👍👍👍🇮🇩🇮🇩🙏
@jamesmeredith3812 ай бұрын
There was one back in the 1980s in one of the magazines Dirt Everyday, Truck'n, or Jeep called the armadillo!
@kobusdutoitbosman62402 ай бұрын
…this is HUGELY exciting would REALLY like to see it perform some day where are you stationed in the US of A ? (This enquiry is from ZA’s Fairest Cape Winelands) Excellent job and project well done‼️ It should work well But listening to your story, it is fact that you put in lots of figuring and thought, physical energy and engineering creativity I am extraordinarly impressed My first Jeep was a CJ-2A obtained in 1965-66 ex Zululand in ZA and since then i remained fascinated and absolutely sold on this wonderful invention since (ex) WW II Most certainly as intriguing as you can get…👊💯 My compliments : you are doing a really great job and will follow your spoor (tracks!) with keen interest in time to come • Again: WELL DONE and thank you kindly for sharing Its a real thrill beste 👊🔥 🪖
@BuyFixFlip2 ай бұрын
Thank you so much for the kind words, I'm in Ohio in the US. I've wanted to build one for a long time and finally pulled the trigger on it. I will definitely be testing it out here soon!
@PakAnto-bl4zv2 ай бұрын
- pand toper. - lend lover.
@PakAnto-bl4zv2 ай бұрын
(Y)
@lowrangeoverland90132 ай бұрын
Outstanding ‼️💯👍🏆🥇
@user-ts2od5up6l2 ай бұрын
ยอดเยี่ยม
@nickynik59512 ай бұрын
Wa bagus sekali💕💕💕👍👍👍👍
@UHO2212 ай бұрын
👍👍👍👍👍👍👍👍🤝🇮🇩
@afb787592 ай бұрын
👀👀👀👀👀👀👀👀🇺🇲🇺🇲🇺🇲👍👍👍
@MacsSpecialitiesProperties2 ай бұрын
Super Sick 6x6
@BuyFixFlip2 ай бұрын
Thanks man!
@iansykes19832 ай бұрын
Pretty cool 👍🏻
@BuyFixFlip2 ай бұрын
Thanks man!
@loganator2 ай бұрын
Awesome build! Which forum did you source the engine from? Is it IDI?
@BuyFixFlip2 ай бұрын
Greg at overland diesel has a kubota swap group on Facebook.
@justinesplin67892 ай бұрын
I would love to see what modifications were needed for the transfer case.
@BuyFixFlip2 ай бұрын
I'll try to make a video on it!
@infernoking75042 ай бұрын
I would build a cab and cage for it so it would be okayish in a impact
@infernoking75042 ай бұрын
I miss my 1992 jeep xj even through the chrysler electronics made it very unreliable maybe one day ill build it again
@gregmargison11292 ай бұрын
You've really outdone yourself on this one! Bravo!
@BuyFixFlip2 ай бұрын
Thank you very much!
@andykirkendall82852 ай бұрын
Awesome 😎
@BuyFixFlip2 ай бұрын
Thank you!
@cob_capone17292 ай бұрын
Would it be possible to put a 12 valve Cummins into a Willys
@BuyFixFlip2 ай бұрын
That would be alot of weight (800 plus lbs) in such a small area and lightweight vehicle.
@cob_capone17292 ай бұрын
@@BuyFixFlip so you’re saying it’s possible
@gregmargison11292 ай бұрын
@@BuyFixFlip 1000lbs for a 12V Cummins.....ooooof! Big girl
@arthurfrayn26522 ай бұрын
4-BT, or a R2.8 Cummins maybe... R28 is only 503pnds, 4-BT IS 794pnds
@cob_capone17292 ай бұрын
@@gregmargison1129 it would have an insane power to weight ratio though
@nickarnup92992 ай бұрын
First and nice job
@scotttienken74602 ай бұрын
Hey Tanner this is Scott.. we met last night at truck stop & you borrowed my jack... great meeting you man! Glad to help a brudder diesel bro!... I hope you made it home safe... I did @ 8 AM lol drove all night.. hey what was the name of that noise canceling muff for my isuzu pup diesel 4x4? I dont utube much and could not msg u
@BuyFixFlip2 ай бұрын
Hey brother, thank you so much again for the jack. The exhaust was called a vibrant 1138 exhaust from summit racing it's just a muffler that pulls out a ton of drone and noise.
@scotttienken74602 ай бұрын
@@BuyFixFlip See??? you helped me right back man thanks! I have a 2000 S10 at home I may convert, too!
@kentuckysleepyhollowband16112 ай бұрын
Hey man so I want to do the same thing but little different truck do you no if the v1903 is the same block as the v2203 I can't seem to find anything
@BuyFixFlip2 ай бұрын
Yes contact greg at overland diesel he is the 03 series engine expert!
@chriswebb89783 ай бұрын
How’s the drive ability on the road and the mpg
@BuyFixFlip3 ай бұрын
It's great on the road. The only thing I would change is to throw an overdrive on it. My new kubota build has 3.73 gears. Mpg is about 30, depends on the driving but always high 20s low 30s.
@woodyaborn56413 ай бұрын
Well that was helpful!
@BuyFixFlip3 ай бұрын
Read the description..
@Taylor-oh5os3 ай бұрын
Plan on doing a similar build, what all are you running in your drive train
@BuyFixFlip3 ай бұрын
I went over it in another video, all stock drive train!
@spyder23833 ай бұрын
Never put an axis power anything into a US military vehicle!
@appleztooranges3 ай бұрын
HF is having a tent sale for $249. Going to grab it I think over the Daytona
@BuyFixFlip3 ай бұрын
That's insane, I think I paid over 400. I still love this thing!
@appleztooranges3 ай бұрын
@@BuyFixFlip awesome. I’ll grab it. Can work on snowblowers with it too lol
@HILLBURKE3 ай бұрын
Its like a legit Mahendra roxer
@danhunik79493 ай бұрын
You might be interested in the Kubota diesel swap done on Robot Cantinas channel. www.youtube.com/@robotcantina8957
@Fulcrum2053 ай бұрын
You should put in a thermostat to get your temps up to ~190. This will boil off the water in your oil and greatly prolong the life of your engine
@frankiedecarlo37673 ай бұрын
What is best years for these motors to buy?
@ryevdee60643 ай бұрын
Appreciate you giving feedback on the worst-case-sand scenario! Thinking I gotta get one the only space I can work on my truck is a sandy area in FL haha
@BuyFixFlip3 ай бұрын
I lived in Florida for 7 years and that's what made me think, my Jack's would always sink.