Looks nice ,but wish you had a smaller diameter one for people who don't need that much hose length. Narrower is fine, but it still sticks out really far from the wall to accomodate that length.
@FastCapLLC5 сағат бұрын
@johndoe6032 thanks for the feedback, we will pass this along to our engineering team.
@CBWHellbound3 күн бұрын
It doesn't allow for the ruler stops when a specific drilling postion is required especially during the processing of drawer fronts. This would also not work for the EASYSTICK. Great idea and getting closer to a complete solution, thank you!
@ActionTeamJoe3 күн бұрын
I like the light box setup
@ackmartin606 күн бұрын
Great idea but you should make a fittings for 4" and 5" hoses. Almost anyone who has a blum machine has a dust collector and would connect it to a 4” or 5” dust collector hose not a shop vac. They come with a 4” hose connector.
@FastCapLLC3 күн бұрын
@ackmartin60 Thank you for the feedback, we will pass this along to our engineering team!
@FastCapLLC3 күн бұрын
@ackmartin60 If there was an accessory adapter that would allow you to use the Blum V2 Vacuum Connector with a dust collector hose would you purchase it for your system?
@Ryan-nh2os7 күн бұрын
Will this work with the Blum Easy Stick, or only with the standard ruler?
@FastCapLLC3 күн бұрын
@Ryan-nh2os The Standard Ruler at this time. It doesn't work with the Blum EASYSTICK
@enzorocha29777 күн бұрын
If I were editing this, I would've used the footage at 0:37 rather than the one we see at 0:35, so when you say "and now, instead of having to tip the blade...," the corresponding visuals would match the dialogue. When you pulled out and laid the flat back tape, viewers expected a demonstration of how it's used. Yet in the next shot, it's a close-up of the rounded tape instead. This is jarring because that's the opposite of what was expected. In editing, it's called a continuity error. Ah well, you're a carpenter, not a videographer, so no big deal, I guess. A tip for next time.
@FastCapLLC3 күн бұрын
@enzorocha2977 Thanks for the feedback! Always room for continuous improvement
@codarussell79258 күн бұрын
Can you use the clamps while this is installed?
@FastCapLLC3 күн бұрын
@codarussell7925 Which clamps are you referring to? The SawHood is mounted using the saw's accessory holes. If you have a clamp that uses that accessory hole, you can't use both simultaneously. If you have 2 accessory holes on each side you can use an accessory along with the Sawhood.
@JurassicJolts11 күн бұрын
Nice
@RobyWanKenobi12 күн бұрын
Does the center of the 1/2 inch hole line up with the center of the anchor?
@FastCapLLC11 күн бұрын
@RobyWanKenobi It will be a tiny bit offset but not enough you would notice unless you have an exact height you need.
@RobyWanKenobi11 күн бұрын
@@FastCapLLC I will be marking through a hole in a cleat that has a specific height. Do you know the offset?
@jalan647315 күн бұрын
You do not need to remove the door to do this.
@TreeOfLifeWoodworking17 күн бұрын
The obvious issue with this is the guide rail wobbles all around you have nothing keeping it locked in place. I saw it move several times just during the demo. Make an alignment stop for that... and you have a better product
@ya0000717 күн бұрын
review or sales commercial?
@2Shine5517 күн бұрын
What does WASP stand for?
@FastCapLLC17 күн бұрын
WASP is a Barcode Technology software used for inventory management system. WASP is the name of the software.
@RandyandPetraJ19 күн бұрын
A good improvement would be customer service. Descent products, but quality is questionable. After 2 months and maybe 2 uses of a BRAND NEW tape the locking mechanism broke. Customer service refused to provide support because I didn’t purchase off their own website. Ridiculous. Would never purchase a product from them again.
@FastCapLLC19 күн бұрын
@RandyandPetraJ We are sorry you had a bad experience we will definitely replace that for you. Even though you didn’t purchase it from our website. We are surprised it broke within 2 months, that shouldn’t happen, our tape measures last for years. Please email [email protected] with your blade style and your address and they will send you a replacement.
@RandyandPetraJ19 күн бұрын
Descent products, but quality is questionable. After 2 months and maybe 2 uses of a BRAND NEW tape the locking mechanism broke. Customer service refused to provide support because I didn’t purchase off their own website. Ridiculous. Would never purchase a product from them again.
@FastCapLLC19 күн бұрын
@RandyandPetraJ We are sorry you had a bad experience we will definitely replace that for you. Even though you didn’t purchase it from our website. We are surprised it broke within 2 months, that shouldn’t happen, our tape measures last for years. Please email [email protected] with your blade style and your address and they will send you a replacement.
@edwardgonfindini729519 күн бұрын
Good idea, but did you jump a step? Jamb extensions are not in yet. Fast cap has brought awesome ideas to market.
@FastCapLLC19 күн бұрын
@edwardgonfindini7295 Yes, of course, we were trying to show the function of the Best Fence Double Stop
@rboswald19 күн бұрын
I hope Spencer gets a royalty.
@FastCapLLC19 күн бұрын
@rboswald We have reached out to Spencer but haven't heard back from him. We are hoping to hear back from him soon!
@mim204620 күн бұрын
That only seems to work with flat casing, but if you have a colonial or other type of casing, you can’t flip it in for end and it would not be sitting flat and would be sitting on an angle.
@FastCapLLC19 күн бұрын
@mim2046 Yes you are correct it is designed to work best for flat casing. With Colonial, it will still save you some time if you do batch cuts. Like you said, you wouldn't be able to flip the boards.
@kimgarback56620 күн бұрын
Shoot, looks like this video is no longer working. Is there another version of this video out there somewhere?
@FastCapLLC19 күн бұрын
@kimgarback566 We test the video on a few different browsers and were able to play it. Was an error message popping up? Or was it not playing at all?
@kimgarback56619 күн бұрын
@@FastCapLLC it was saying the video no longer exists. I'll try it again on a different browser.
@kimgarback56613 күн бұрын
@@FastCapLLC Hi, I was able to get it playing finally on Google Chrome. Thanks!
@jamesritchie854020 күн бұрын
Have to careful that the sharp tip of the miter doesn’t slip behind the stop making your cut long
@looopy2u20 күн бұрын
What a load of rubbish. Soon gets expensive if you have to replace it every time you do a compound cut. The saw is a compound miter saw😂😂😂😂😂😂😂😂😂😂😂
@crownmoldingbyspectaculart94122 күн бұрын
This type of stop is ideal for those who do a lot of window and door casing
@BradKaboord23 күн бұрын
That stop must save a lot of time when doing a whole house. As well as just doing batch work/repeat cuts.
@crownstopfence584123 күн бұрын
Outstanding!!!
@IanSGI25 күн бұрын
Video improvement request: the background music is a little loud, making some speakers hard to understand. Love the improvements, though, and that you share them.
@FastCapLLC24 күн бұрын
@IanSGI Thanks for the feedback! For our 2024 improvement video will be mindful of the background music.
@joaovasco396928 күн бұрын
We need your producs to be easly available in Europe 😢
@bwilie717329 күн бұрын
Is the short 8 second guitar riff at the 5:35 mark from Shawn Mullin’s “Lullaby” song? 😃
@MrOmega85529 күн бұрын
Totally unnecessary! You can just loop the cord around the spool.
@williamstankiewicz3313Ай бұрын
WELL DONE PAUL!!!
@fabricef6825Ай бұрын
Without saying it, they do the 5 whys technique to dig deeper the process.
@TravisMagicАй бұрын
Junk
@christopherarmstrong2710Ай бұрын
2:14 “The test of any company is their bathrooms.” Love it! 8:27 Employee satisfaction will guide you to customer satisfaction, and customer satisfaction will guide you to success. 10:55 “What does it matter what the plant looks like, if they have zero defects?” ~Shingo 14:50 Japanese are open to foreign connections. You can call the president and get the assistant, and the assistant is current and up to date with all of the information in the company. The only challenge is the language barrier. 17:04 Great processes are key to OE and quality. The Japanese have a high quality life because they are in pursuit of quality in everything they do.
@JackBusseyUKАй бұрын
I love that product 🎉👍👍
@christopherarmstrong2710Ай бұрын
Great video. Curious what your thoughts are on using a 3rd party 3PL vs. keeping fulfillment in-house?
@FastCapLLCАй бұрын
keeping it in house is the easiest way for you to be able to make improvements, eliminate waste, and make the process the most efficient it can be. It also allows full ownership to easily pivot due to unforseen circumstances, or new improvement ideas quickly and easily. There are maybe some circumstances in which using a 3PL might make more sense - such as square footage constraints etc. If that is the case though, you should always find someone willing to work with you to make constant improvements to their processes based on your requests, or it will be a nightmare.
@christopherarmstrong2710Ай бұрын
@@FastCapLLC Great insights, thanks Paul. I also imagine FBA/Amazon wouldn’t be any better, especially if needing to resolve issues with defects? Ideally, no defects would ever make it out of the plant or factory floor - but in the rare event that they do, it’d be best to have a system to manage or minimize them at the warehouse (e.g. inspection protocols, etc.), to ensure they never reach customers. It’d be hard to catch them if they make it all the way to a 3PL facility, I would imagine.
@relkus3249Ай бұрын
cc ?
@christopherarmstrong2710Ай бұрын
Fantastic, a leader of leaders! And I totally understand the part about taking care of customer returns and defects on a deep, visceral level, in my mountain bike shoe startup. Anyone who hasn’t tried running a business before will never know what it feels like-but it’s extremely important to do those things. Customers are the core of any business.
@christopherarmstrong2710Ай бұрын
3:13 Love the bathrooms!
@christopherarmstrong2710Ай бұрын
Wow, super nice 👍
@mattmack8103Ай бұрын
Amazing facility. Everything has a fast and efficient flow right down to their "KNUJ" isle.
@-PORK-CHOP-Ай бұрын
Yeah Nah too much play and plastic clip look like they will break easily, how do I use the Domino without it ?, same way I am using it currently, don't need this complicated gadget.
@christopherarmstrong2710Ай бұрын
😂 Nice 👍
@RuvinEventsАй бұрын
When the videos hits 1:30 it sounds like mark cuban.
@suheladesilva2933Ай бұрын
Very impressive system, thanks for the video.
@JamesBehn-x3gАй бұрын
Kool video showing Lean Manufacturing in action. Thanks for sharing. Lots of good ideas here.
@peterbarlow8912Ай бұрын
Have several green left/right tapes. The thumb lever clip is great and the two way scales are also. As a guy the has been reading scales for 5 decades I could do without labeling all the eights. It’s just too busy!
@FastCapLLCАй бұрын
@peterbarlow8912 Thanks for the feedback!
@peterbarlow8912Ай бұрын
@@FastCapLLC make the traditional tape in a left/right. The pinch clip is saving my pocket hems from shredding.
@warmac57Ай бұрын
Part Gorilla
@marybradley210Ай бұрын
Will this fit on a Hercules miter saw?
@FastCapLLCАй бұрын
@marybradley210 No it currently only works with the DeWalt 12" 779, 780, 781, & 790. We are working on creating more versions for other saws. We will keep you posted when they launch.