Пікірлер
@sanjaypal2509 22 күн бұрын
Ye charger kha se milega
@KasraOskuie 3 ай бұрын
It looks like EV-PEAK does not read or reply to comments. However, I will leave my concern. I'm trying to check and recondition some 7.5 v NiHm batteries. Base on recommendation of others on Youtub, I set my capacity at 5000 for discharge and 7500 for charge. When cycles are over and I see the "END" flashing, the results I get are 0000 for discharge and 0106 to 0110 for charge reading and all cycles and over 12 batteries when it should show 4 digits for high. Most of my batteries are okay. So, it shouldn't be that low. I don't know and don't understand what I'm missing or doing wrong.
@dashbmw 6 ай бұрын
Hello. What does CAPA mean? What do I need to do when charging and it reaches CAPA before end of cycle?
@rateau-789 6 ай бұрын
The charger hit the maximum capacity of charging the battery
@dashbmw 6 ай бұрын
I know this. So that means that the module is not fully charged. So what can be done to make sure I charge to full ??
@rateau-789 6 ай бұрын
@@dashbmw I have the same issue !! I want to charge my Li-ion but I can't charge each cell to 4.2 V. There is a maximum capacity cut-off function set to 900 mah maybe by turning this option off. I write to the tech support
@rateau-789 6 ай бұрын
@@dashbmw By changing the maximum capacity I solve the issue of CAPA
@garygullikson6349 6 ай бұрын
I have the older "3620" 50 watt per channel and the newer Blue/Silver CQ3, old one has one channel display intermittent. CQ3 works fine.
@ResearchDevelopment-b7j 7 ай бұрын
Hello sir! Please show me how to upgrade firmware ev-peak u1s and reset.
@ResearchDevelopment-b7j 7 ай бұрын
Please show me,ev-peak u1s upgrade firmware and reset.
@garygullikson6349 11 ай бұрын
I have the blue and silver CQ-3 version. Instruction sheet provided is not very helpful. There are a number of YT how-to videos for "4-button chargers" that are helpful. You just have to fumble your way through selecting battery type , number of cells, mah capacity, charge, etc., mode, and then long press the start button to confirm settings and start the charge or other desired function. . Do this until you can access the many functions of this charger by "muscle memory". Apparently, EV-Peak thinks that most users can follow the flow chart etc., in the instructions. Great charger lousy instructions!
@dashbmw 6 ай бұрын
@@garygullikson6349 yes agreed. Not enough detailed data and not enough scenarios for better charging
@KasraOskuie 3 ай бұрын
I agree 100%. The instruction is not complete. Just a general info. For someone new to this, it's almost impossible to understand different scenarios on my own or trouble shoot.
@dylanguo7230 Ай бұрын
Thank you for your feedback! I already forward to our team.
@thebell313 11 ай бұрын
I had two of these charges. Both had the same issue - the fan started making weird noise. The second unit was used just for 8 days. Not reliable.
@thebell313 11 ай бұрын
I had two of these units. Both had the same issue - FAN started making weird noise.
@_evL_ 11 ай бұрын
So I got this Charger recently... From GetFPV. And it's pretty impressive. But I didn't get a Manual in the box.? I had to downloaded it. And it leaves a lot to be desired, the Manual that is. I mean come on EV-PEAK... And this video, of some Chinese chick speaking in broken English, is not helpful. Might I suggest to also make another video with with a fluent English speaking person and going in depth a little more. I am not sure that I am using this correctly. I would appreciate any help from Tubers on this... This Charger is Great.... If ya can figure out how to use it...
@dylanguo7230 Ай бұрын
Thank you for your feedback! 😀
@TradingDailyforyou Жыл бұрын
I bought one today, wats the charging time on a 3s lipo
@sal_ssp Жыл бұрын
same, did you figure it out? and how long should I charge a 3s lipo that just came out of the rc car box ?
@TradingDailyforyou Жыл бұрын
@@sal_ssp this balance charger charges at 1 amp and that charges 1000 mahh per hour..5000 mahh 5 hr...... so depending on your mahh. Fully charge ur lipo and let it cool down for 10min before use
@MyRcGoSlow Жыл бұрын
Does it have a storage mode ?
@dylanguo7230 7 ай бұрын
Yes
@Brocksugc Жыл бұрын
How do I stop it flashing red?
@บุญเสริมตาทิพย์-ม4ธ Жыл бұрын
ใช้ชาร์จ สมาร์ตแบตเตอรี่ รุ่นOKCELL 14S 20000mAh ได้ไหม
@dylanguo7230 8 ай бұрын
Yes, and make sure the firmware is 3.2 version
@k.satyanarayanak.satyanara4743 4 ай бұрын
@@dylanguo7230 sir 3.2 version but not charging okcell 14s 20000 mah battery it shows error main port or balance port not connected
@DitaCrafts Жыл бұрын
Hi dear how have 1 questions. How to change language from china to English
@dylanguo7230 8 ай бұрын
You can change the language by changing the firmware version .
@SBRV-gl8er Жыл бұрын
I am doing a Discharge-Charge cycles on NiHM battery. How do I get the current mah reading during the process, without interrupting the process? I have tried <Mode/ESC> button and that does show the information but seems to stop the discharge/charge process.
@dashbmw 6 ай бұрын
@@SBRV-gl8er I don’t think you can. It will stop the process
@stevengambles374 Жыл бұрын
It wont charge my batteries that my other chargers wil charge
@stevengambles374 Жыл бұрын
I have batteries that wil charge on my other chargers but wont charge on this one
@leverittsinatra1187 Жыл бұрын
My U6Q can only charge tattu battery. How to charge okcell?
@dylanguo7230 8 ай бұрын
Upgrade the firmware to 3.2 version.
@benhurisaq7712 2 жыл бұрын
fist of all thank u for showing us gus & where can i buy this charger
@sinfoxtech2553 2 жыл бұрын
Hi！Thanks for your interest and you could contact with [email protected] for more information
@eprohoda 2 жыл бұрын
guy-Love it- reaally superb video,all the best~
@sinfoxtech2553 2 жыл бұрын
Thanks for your supporting~Love your video! So good and beautiful scenery~ Hope you shoot more beautiful videos around the world and spread to this beautiful for everyone