EV-PEAK CQ3 Quad Channel Instruction Intelligent Balance Battery Charger AC DC Dual NiMH LiPo

[@SBRV-gl8er]

I am doing a Discharge-Charge cycles on NiHM battery. How do I get the current mah reading during the process, without interrupting the process? I have tried button and that does show the information but seems to stop the discharge/charge process.

[@dashbmw]

@@SBRV-gl8er I don’t think you can. It will stop the process

[@KasraOskuie]

It looks like EV-PEAK does not read or reply to comments. However, I will leave my concern. I'm trying to check and recondition some 7.5 v NiHm batteries. Base on recommendation of others on Youtub, I set my capacity at 5000 for discharge and 7500 for charge. When cycles are over and I see the "END" flashing, the results I get are 0000 for discharge and 0106 to 0110 for charge reading and all cycles and over 12 batteries when it should show 4 digits for high. Most of my batteries are okay. So, it shouldn't be that low. I don't know and don't understand what I'm missing or doing wrong.

[@dashbmw]

Hello. What does CAPA mean? What do I need to do when charging and it reaches CAPA before end of cycle?

[@rateau-789]

The charger hit the maximum capacity of charging the battery

[@dashbmw]

I know this. So that means that the module is not fully charged. So what can be done to make sure I charge to full ??

[@rateau-789]

@@dashbmw I have the same issue !! I want to charge my Li-ion but I can't charge each cell to 4.2 V. There is a maximum capacity cut-off function set to 900 mah maybe by turning this option off. I write to the tech support

[@rateau-789]

@@dashbmw By changing the maximum capacity I solve the issue of CAPA

[@_evL_]

So I got this Charger recently... From GetFPV. And it's pretty impressive. But I didn't get a Manual in the box.? I had to downloaded it. And it leaves a lot to be desired, the Manual that is. I mean come on EV-PEAK... And this video, of some Chinese chick speaking in broken English, is not helpful. Might I suggest to also make another video with with a fluent English speaking person and going in depth a little more. I am not sure that I am using this correctly. I would appreciate any help from Tubers on this... This Charger is Great.... If ya can figure out how to use it...

[@dylanguo7230]

Thank you for your feedback! 😀

[@garygullikson6349]

I have the blue and silver CQ-3 version. Instruction sheet provided is not very helpful. There are a number of YT how-to videos for "4-button chargers" that are helpful. You just have to fumble your way through selecting battery type , number of cells, mah capacity, charge, etc., mode, and then long press the start button to confirm settings and start the charge or other desired function. . Do this until you can access the many functions of this charger by "muscle memory". Apparently, EV-Peak thinks that most users can follow the flow chart etc., in the instructions. Great charger lousy instructions!

[@dashbmw]

@@garygullikson6349 yes agreed. Not enough detailed data and not enough scenarios for better charging

[@KasraOskuie]

I agree 100%. The instruction is not complete. Just a general info. For someone new to this, it's almost impossible to understand different scenarios on my own or trouble shoot.

[@dylanguo7230]

Thank you for your feedback! I already forward to our team.