Lock and Kilo

Пікірлер

@jpadilla6436 5 сағат бұрын

Let's here back from you all now because your cheater picks don't work on gen 3 and how can you tell which is which? And why does yourtube change my wording after I post?

@adolfosanchez1868 6 сағат бұрын

wooow !!1 very good explanation !!!

@Hadjiabdelghani Күн бұрын

Where can I be trained around las vegas... thank you

@Fluffychip Күн бұрын

Brilliant thanks for this, the instructions that come with the lock are poo poo!

@murdermurder2812 2 күн бұрын

Plain English instructions clear as crystal, thank you sir 🫡

@attribute-4677 3 күн бұрын

Actual picking begins at @5:38

@tremorchrist51 4 күн бұрын

thank you so much! very helpful and clear video. I couldn't figure it out with the paper instructions alone.

@frankw3ll 4 күн бұрын

Is there a model for wr5 keys?

@cityfood5623 6 күн бұрын

👍👍👍👍👍👏

@WaltBorchers-x3l 7 күн бұрын

The instructions say I should disconnect the negative terminal from the battery first ?

@LockandKilo 7 күн бұрын

@@WaltBorchers-x3l anytime you work with anything electrical on vehicles it’s always going to tell you to disconnect the battery. Smart idea. The risk of someone starting the vehicle while you are working on it is possible. You never want that key to turn to ‘ON’ while things are disconnected as the ECU can log a fault code and your Check Engine light will pop on. Also, as it’s electrical, it always runs a risk of shock! Your battery is beneath the driver side floorboard. You can pop off the cover with 6 tabs you twist. The negative usually has a quick-disconnect. Per YT policy: *This is not professional advice and I am not a professional mechanic. A professional Auto Shop or Dealer are the only places who can give definitive answers to this question*

@GloryofRoam 8 күн бұрын

Perfect. Thank you!

@soozecca19 8 күн бұрын

super helpful thank you!!

@itsAndyStringer 9 күн бұрын

So, although i don't think this video should be showing this info. just tells me not to use one at all. cause now thieves now know what to do if they didnt in the first place

@itsAndyStringer 9 күн бұрын

make sure when you mount these to your wall, you at least try and hide the thing

@Bikun500 11 күн бұрын

Good video. Very clear, detailed, more like this. I have watched it over year ego and tried to unlock mine but unsuccessfully. So today I watched again and after quite a few attempts I finally got. Thank you for your help.

@jdubya7852 12 күн бұрын

Omgosh, thank you! Been fighting with this knob and nonsense instructions for 15 mins.

@alexanderastafyev3615 15 күн бұрын

Thanks and God bless you for a kind community service !!!

@CHUCKY04 16 күн бұрын

thank you for help

@nightswatch8659 16 күн бұрын

Hi, I have a shclage with the screw caps. How would I remove the caps? Thanks!

@LockandKilo 16 күн бұрын

Hi, you can use a small, flat head screw driver or a pick tool. Depending how far in the caps are pushed, you gently pry them. The smaller the tool, the less chance you’ll mark up the lock. The caps just press inside to put them back :)

@nightswatch8659 16 күн бұрын

@LockandKilo Thanks so much!!

@jamienegrete2841 18 күн бұрын

Thanks for showing me how to use the tool. I just got mine and I am ready to use it thanks to you

@feyrrari 19 күн бұрын

Will this work on a 2018 smart for two 453?

@maccaloube 20 күн бұрын

0:00 Intro 0:34 Reset the unknown codes back to factory settings 4:31 Change the 6 digits programming code 6:22 New 4 digits user code 7:37 Disable all digits user codes temporarily 9:30 Erace all digits user codes 11:38 Add safeguard code 12:52 Turn off sound 14:10 Preventing a lock out situation

@sushisushi1177 20 күн бұрын

Can't get it ugh

@getajobbro3722 20 күн бұрын

Thank you

@getajobbro3722 20 күн бұрын

So many thx.

@jbowditch 21 күн бұрын

thank you! I was able to remove two lockboxes from my house two years after purchasing.

@jbowditch 21 күн бұрын

thank you! I was able to remove two lockboxes from my house two years after purchasing.

@butwhatdoesitmane2344 24 күн бұрын

Lifesaver

@jsoutdoorz7390 25 күн бұрын

Does that not offset the key code

@LockandKilo 25 күн бұрын

If you rebuild it in the same order, the existing key would still work. It would only offset if you scrambled the bottom pins upon rebuilding.

@jsoutdoorz7390 25 күн бұрын

@@LockandKilo I’m learning the trade as well I know I have tons to learn and thank you so much for a response

@jsoutdoorz7390 25 күн бұрын

@@LockandKilo if you moves the pins to different chambers you would have to decode correct?

@LockandKilo 25 күн бұрын

@@jsoutdoorz7390yeah, so all of your springs and top pins (flat pins) are the same depth on a Kwikset. So, the bottom (pointed pins) are what you really have to pay attention to. So, leave your key inserted into the plug while you insert each bottom pin. This is to help you see if a pin is incorrect in each chamber. All pins should be flush.

@duanehalbert2946 26 күн бұрын

Very nice, thank you for the info

@BlkFireHawk427 27 күн бұрын

Can the Salberry lock be repinned like a Kwikset?

@LockandKilo 23 күн бұрын

Unfortunately, these cylinders are not meant to be rekeyed. You can tear them down and gut them, however as the cam isn’t made to come apart, Salsbury instead sells replacements with keys.

@Chirael 27 күн бұрын

Great information, thanks for sharing it 🙏

@lokpikr999 27 күн бұрын

Wow! I'm surprised that JMAs would be closer to OEM specs than Ilco. Anyway, I believe that I once heard that early Ilco H75 blanks had the same issue.

@LockandKilo 27 күн бұрын

Yeah, I’ll undoubtedly receive more hate about using JMA haha But, it’s good to carry a variety of blanks. ESP and JET are also good to keep on hand. Some guys carry JET over Ilco believe it or not.

@resecurelatch 27 күн бұрын

Does this company provide a new locket? Say that the lock pinset has gone bad and cannot be repaired, can you order a new cylinder with a key provided?

@NateGodin77 27 күн бұрын

Very helpful video for something to look out for, thanks Kilo!

@LockandKilo 23 күн бұрын

@@resecurelatchyes, you can order a new cylinder with 2 keys from Salsbury. Oddly enough, it’s that new version where this issue becomes even more of a problem lol

@robertthompson4965 27 күн бұрын

Replacement blades are available.

@carlossoto6239 27 күн бұрын

solid job of working threw the mechanics of the lock assembly...great work and thanks for providing the information.

@lokpikr999 28 күн бұрын

“No one can overcomplicate a mailbox locking mechanism.” Salsbury: Hold my beer. Awesome instruction on disassembly/reassembly Kilo!

@LockandKilo 28 күн бұрын

These are always fun to work on haha

@paulej 28 күн бұрын

Mailboxes from this company still have glass -- even new ones from 5 years ago. And, yeah, it is a bit unfortunate since anyone could break the glass and steal mail.

@LockandKilo 28 күн бұрын

I know they expect these to be kept inside of an office, but glass is still a wild concept haha

@resecurelatch 27 күн бұрын

What if you replaced the glass with a high strength Plexiglass? It would take alot more effort for someone to get what is inside, I'm sure after a couple strikes (and the noise that would make), the perp would move on.

@LockandKilo 27 күн бұрын

@@resecurelatchso, the glass is designed as a “looking glass”, so the customer can come in, glance inside without needing to actually open the box. Plexi would help, but look at the screws that hold it lol, not exactly holding back much force. It’s a convenience thing and they do still make a glass version, but it seems to be made as it matches closely to these old versions. Other boxes have been made by brands with a much thinner looking-glass. Sometimes people have slammed these and broken the glass. These are generally kept inside of a building with some sort of access control. So, they aren’t as open to public reach.. so, I understand the convenience. But, they ultimately did end up going with full plate style doors like USPS cluster boxes eventually and those came with much better locking mechanisms as well :)

@resecurelatch 27 күн бұрын

@LockandKilo Full plate designs, Suck! They offer no elegance like we once had back in the day... when most were not looking to smash and grab everything not bolted down. Ahh, the "Good Old Days".

@LockandKilo 27 күн бұрын

@@resecurelatchyeah, unfortunately nowadays as PO Boxes are left open to the public at the Post Office and cluster boxes are too far from sight, looking-glass styles are gone. This one is just such a crazy wide version. I don’t mind the glass version with a strip of glass as a viewer on the left/right of the boxes. Gives it a nice look, can’t really reach through them. This one was definitely from the simpler times lol

@Luciwho1 29 күн бұрын

thank you!

@KStewart-th4sk Ай бұрын

Ever had this problem? I have to use the Drive-In Style because the keyed doorknob latch hole was already drilled to 1", i think. It looked bigger although i didn't actually measure it, but it was apparent the deadbolt was mortised and it wasn't. Other times i have seen these types of doors with both mortised in. I wouldn't even call mine a drive in---more like a light finger push. I don't know why the hell that was done because the deadbolt portion of the door was drilled to 7/8" i believe and mortised to accept the screwed in plate. I am not really happy with the loose fit of the keyed latch. I bought the steel cladded door at a Thrift Store and it didn't really appear to have been ever used. I am only using it in a detached garage so not looking to change it out because of that. I put in a Schlage set. Tried contacting them via email to see if there was such a thing as a larger diameter latch with the screwed in plate without needing to use the collar BUT no reply after several days. I can guess probably not. I might look into shimming it somehow to make the collar fit tighter. Someone else had brought up the same issue to the video and you had mentioned the collar might have been bent in shipping BUT that is definitely not my issue. The hole is just a bit too large to give the desired interference fit, in my opinion.

@LockandKilo Ай бұрын

Doors are always fun to come across, thrift store/salvaged doors are even more fun haha I have come across doors where I remove a standard kwikset and the hole for the knob is barely an inch tall and 2 ish wide… I have come across deadbolts where the installer cuts the hole about an inch diameter and removes the inner shield of the deadbolt, just using the cylinder and cover on the door. The things people do to doors doesn’t surprise me anymore, but it sounds possibly that the door you picked up was modified for the original owners lockset. It may not have “fit” right to whatever lock they used, they could’ve dremeled a bit more than normal to make whatever they had work. One thing you can kind of do with the collar is after installing it on the latch, use a flat head to widen the collar, but be super gentle doing this. You can fit shims as well and make it work. Shims will prevent it moving, coupled with the lock installed holding it in place, it can work. Not ideal, but worth a shot as it doesn’t sound like a heavily used door.

@AverageOverlander Ай бұрын

Took me a couple dozen times and a few different pieces but it worked. Awesome video.

@RetireQuietly Ай бұрын

Thank you so musch for this. I watched others and they didnt include the last bit about turn the numbers one more click. Ive spent days thinking I couldnt feel the right thing. With yours ive got it in 5 minutes. 🎉🎉

@ozzydreamer4174 Ай бұрын

And what if that colpor isn't included in the kwikset doorknob kit? The one for the doorknob is included but not for the deadbolt. I need to be able to use the drive-in method on this door.

@smorrow0816 Ай бұрын

Holy crap it worked!. Took me a while but I got it. THX.

@antoniosantos-agosto1691 Ай бұрын

Thank you sir

@mahendrapanara615 Ай бұрын

Very helpful video. Wel described all necessary matters.

@scotthackett4500 Ай бұрын

Thanx for the detailed video

@danieldlima5886 Ай бұрын

Very helpful, i have a Kwikset 620 how do i remove the cylinder , thanks

@jamprindle1 Ай бұрын

Thanks for the information. I also found if you shine a light on the edge of the code wheel you can watch till you no longer see a reflection, this is the groove. Then rotate them 5 like you noted. Unlocked my kids padlock after his sibling decided to scramble it for him and promptly forget the code.

@Wynnstorm1 5 күн бұрын

Thanks for this tip. It was definitely quicker than his way.

@JanRogers-e8r Ай бұрын

Brilliant!! Been dealing with a loose lock for years...3 minute video with you and done! Thank you!

@yoliscatalan3655 Ай бұрын

So I see this lock is not a good idea to use it in my property😮 any person can open it

@Larry-c7h Ай бұрын

Brilliant video, builders left a key safe on my property, I nearly took a hammer to it, but saw this help and I open safe in a minute. I used a lid from tin of tomatoes cut as instructed on the video , and after 2 attempts I got it open. Scary to think how easy it was, you think master locks would change design.

@Weimeraners Ай бұрын

I have the same lock. I have the lights the beeping, but I don’t hear the click engage so when I add the code it beeps but there’s no click and when I turn the handle it doesn’t do anything. Is there something broken or something wrong?

Ең жақсы KZbin

Пікірлер