I’ve got a 2009 that’s been modded with new electrics, it’s nicer than many lp’s I’ve played. The only down side is the terrible fake ageing, the worst of which was hidden by adding a scratch plate. I bought it for £200 and probably spent £100 having it tweaked by a tech, who had one the same and recommended adding a push/pull treble-bleed which is great. For £300 I have a beautiful Les Paul, which probably wouldn’t get stolen because of the name on the headstock. 😀

I can smell the vodka on this guys breath from here

Can I connect speaker with wire instead of headphone.

Shout out Zzounds pay as you play crew <3

Shhhh..🤫play your guitar 🎸

the sound of the instrument is shit

Does that thing have a small Internal speaker?

Hey everyone. Shalom. I bought one when it first came out and I’m not savvy with computers at all. I’m old as dirt and a plug and play moron. I ran it right into a Headrush FRFR12 and it sounded like ass. I returned it. I too finance as I’m dirt poor and disabled. I’m sure I did something wrong. I can put the Boss IR-2 straight into my powered speaker and It sounds great. Can anyone offer something helpful ? I appreciate it. Also, anyone run one of these with a Line6 HX Stomp ? Would that be compatible ? ✌️

maybe trying different audio drivers and adapters, nor easy nor simple to solve

Tip #1 :Don't order a chibson, get yourself something worth playing and not a fraudulent guitar..

When you say, "Put a heavy amount of tape on the headstock," what does that mean? What does that look like? What does customs do when they see a guitar they suspect? Do they open the package and look at the headstock, and if it's covered with tape, they will let it pass because it will take too much time and hassle to removed it? Is the seller supposed to wrap the headstock with a plastic bag, then wrap tons of duct tape around it so it won't come off without being very careful and using a utility knife to get through? Or are you thinking just several strips of tape down the center because the use some x-ray machine (which I don't thinks exists)? Anyway, please explain if you can. I am going to order one and want to know what to tell them. Thank you!

You’re absolutely right. You inspired me to finally post a video telling everyone what they don’t tell you about the boss sd-1. It doesn’t do reverb, or delay. Like not at all. They don’t say that on the box. The manual, or the marketing material. You have to buy a bunch of other pedals. Booo boss

👍🏻👌🏻

Considering the number of guitars being built, there are bound to be occasional problems. Personally, I've ought three Strats in the last two years and the build quality has been exceptional. So the nice ones are out there, you just might have to play a few to get the perfect one. This has been the same for as long as I've been playing, and that's over 60 years now.

Zoom makes good stuff. Made in China though. I was waiting for an touch screen at a reasonable price and this is one two punch entry price wise. I'll bet they can firm ware improve the presets too if enuf complain. Andertons derides them too.. I was wondering about the looper. Is it only operable from the touch screen or can you turn it on/off and overdub using those triangular red tabs? The 2 on the bottom left for example. hitting those may be easier on your hand that the usual foot things as those hurt! I am 70 yrs old and a lot more delicate than I used to be. I dont think this unit is going to spend much time on the floor either. I like the G5 too but this more. nice review and toda raba.

Could have tuned your guitar for the occasion

well THAT DIDN'T AGE WELL

Is 3 the max pedal count allowed in a patch?

10S is a Chinese company that will build u a guitar I have a Les Paul gold top that is a great guitar and cost me $350 Swapped out the picks ups but other than that it was great out of the box

If you can't afford a Gibson, then buy an Epiphone. These Chibsons are absolute trash 2 out of 3 times.

Hello! I bought this pedal recently and it actually has a very honest effect, but something is wrong with mine, since to "open the sound" of the effect, I need to press the footswitch using my heel instead of using the sole of the foot as Wah pedals generally are, can anyone help me?

You two are Worshipping another Jesus. Isaiah 40:29-41 a terrible mistranslation??? You are reading a perverted translation. LIARS

This video is why the dislike button is important

Grave Deception going on here, Professing yourselves to be wise you've become FOOLS. Repent. There is no other name than JESUS CHRIST of Nazareth whereby you must be saved. The New Testament in the KING JAMES BIBLE was translated from GREEK NOT HEBREW. The Hebrew language movement is the wicked perverse movement of the JUDAIZERS as you all are. You all will embrace the false messiah unless you repent.

Scripture gives the definition of antichrist like this: 1Jn 2:22 Who is a liar but he that denieth that Jesus is the Christ? He is antichrist, that denieth the Father and the Son. 1Jn 2:23 WHOSOEVER DENIETH THE SON: , THE SAME HATH NOT THE FATHER..... You are going to be lead astray if you do not hold fast to how we first received the faith, which is very different to what you are saying. John warned us to hold fast to what we heard at first, right after he defined "antichrist" for us. He said: 1Jn 2:24 Let that therefore abide in you, which ye have heard from the beginning. If that which ye have heard from the beginning shall remain in you, ye also shall continue in the Son, and in the Father. What is written, is written and scripture cannot be broken.

You hold the 1st preset till both preset blink then press the 1st preset

That's a nice top on it.

I have an Ibanez RG655 with floyd rose. It stays in tune extremlly good over time to. I dont have locked it at all it is fully floating. But here is the thing i never have had any problem with it at all even when i put on new strings. I do it this way. 1. I put a aa battery under the floyd so it dont dive down when i loose the tension on the strings. 2.I take of all 6 strings. 3. I clean the neck when i dont have any strings in way. 4. I put on the new strings and i always use the same thickness of the strings. 5. I stretch the strings for abit. 6. I put the finetuningsnobs in middle so i can tune both ways. 7. I tune up the guitar and lock the strings with the lockingnuts. 8. I take away the aa battery under the floyd. 9. I use the finetuningsnobs to get the tune. 10. Finish. I never have had any problem to tune the guitar. I belive the secret is point 4 that i always put on identical strings as was on it before. Problem can be if you decide to drop to example drop D then you most likelly need to adjust the springs to but it uselly is not to much of a problem if you know the logic that the floyd rose need have same tension on both the strings and the springs.

This will replace my Randall 1/2 stack and fit on my pedal board. This thing kicks ass. We all already have flooe effects and an amp so all this does is allow you to leave your amp home and sound killer anywherewhile taking up a small footprint.

This is so funny. It does say Aplidelay and amplichorus so why do none of these work. Amplirube flat out lied. It only does amp and cab profiles since you cannot sample a time based effect. In short they should just call it "Amplitube Tonex". I mean even volume on your guitar and amp level react like it is a tube amp. That is amazing. I put a boost in front of mine and a delay pedal after and any of my guitars sound freaking amazing. I can't believe how good it reacts like a tube amp. I have it plugged straight into a mixing board and MEsa Boogie is right there. So hey good folks at Amplitube lets thisnk about calling it what it really is. An amp and cab profiler. I had a Kemper mini onoprder but it is cancelled. I got the Blackstar MIDI pedal to control it all so I am in heaven.

My boring sound is finally fixed all thanks to you. Bless you✌

They got ya buddy 😢 I haven’t bought a name brand guitar in years, your better of building some parts guitars. especially if you have some knowledge about building guitars and even if your just learning you really should start building them. Good luck man

What model is this one?

Is the neck chunky for a Strat or thin?

When I was around 18 (not that long ago) I saved up around $900 to go and buy myself an upgrade from my Squier I had been playing. I tested different guitars at Guitar Center to see which one suited me and almost every Fender I tried was constantly going out of tune or sounded like shit. I ended up buying an aquaburst Schecter CR-6 for $700 that was on sale, (normally $1,199, basically stealing it), and after taking it home and setting it up it plays like butter even today years later. Dont think I will ever buy a Fender any time soon, but if I do the only models I like are the Jagstang, the Mustang and the Jaguar because of their shorter necks.

No a Mexican Strat is not like a USA made Strat. The finish, the hardware, pickups, switches, nut materials and pots are all different. I own both. And far and away prefer a vintage style USA fender, a lot of things you are complaining about sure seem like basic set up issues, and I have never had a nut on any fender neck cut short, not Mexican , not an American, not a custom shop. They were all high, and needed set up. And I have purchased many fender necks for parts builds. All were high. I really think this dude screwed up the nut himself. Mexican nuts are molded, not cut, they are all high, and he over cut it, then blamed fender. Sorry dude , not buying it. I know better.

I’m about 4 hours away. Wish I was closer. The prices looked like retail. And that slash Les Paul was over priced.

I don’t know why they are having to justify the price. Just play the thing and show off the appointments of the guitar.

I bought an Ultra Jazzmaster. Caused minor cosmetic damage just adjusting the trussrod. The headstock is not treated - softwood, doesn't make any sense. Then there is the cheap walnut hollow dowel - it cracked when the hex slipped. Was so mad I just stuck a sticker over it, lol. The bridge height adjustment uses a hex that is .05"? Do you know how easy it is to lose or break that wrench is? 3rd - have only had a few months, much of which has been in the case and the pickup switch is already crackling like hell in the middle position. My first and possibly last American Fender. I have heard the MIJ's are as good/better for a fraction of the price.

I don't know why, but somehow I don't think this guy was sober when recording this video....

great video 感谢你客观的评价。今年整体工艺又升级了，我这里有售。如果有需要的可以联系我：）

Puts me right off all these KZbinrs who stick a big mic in the middle of the screen. There must be better options? Looks terrible and a can’t watch for long. Lasted 5 mins before switching off but only because it took time to write this.

Bought a roadworn 60's jazz bass brand new last week just as something new. I swore off anything MIM when it came to Fender as i've had so many QC issues. I learned this many years ago and now only have US MM, GL, PRS, GIBSON. I had a bad feeling about this bass coming in and when it did.....within the first minute or so i noticed a 3/4 depth crack at the headstock that extended from the end of headstock, to underneath the E string Tuner. This was a brand new unused Fender in a Fender Classic hardcase. Although i have liked my US Fenders, i refuse to buy anything from Fender again.

I just wanted to extend my deepest.Thanks for making this video.There are a lot of budget guitars that are great out here but Opening more avenues of places to go to get. Decent guitars without breaking the bank is always a plus in my book. I have several gnot, really a collector but kinda am in a sort. But you have featured a couple of places, I've never heard of that. I will be checking out because of this video. Thank you again for making this video. For the rest of us🎉

Going from a 1/8 inch stereo to a mono 1/4 into another amp.....it's like crickets have invaded my house....terrible noise. Not worried about stereo signal into my other amp

I just ordered a gold top right now from BTCustom after watching this video. I am in Ireland. Hopefully it arrives without any hassle. Will update you if and when it gets here.

God this video sucks! I saw the thumbnail and was hoping youd do like other more qualified guitar knowledge guys like Phillip mckinght..or glen flicker god dude don't lie to people with ur thumbnail then talk about your past with thus guitar then just sho off a rando lookinf usa moderen fender sss strat boring dude! Read the room my guy! I can see crap like this in video's from 4 years ago dude next time actually show the Pickguard off with said pickups 1st or talk more about it. U know someone that has actually knowledge about gear!.. i couldn't click thumbs down fast enough!

Download managers are a license tool and marketing opportunity to have a “theres a new update” spot to reel you in like a iphone.

i purchased the Marty Schwartz ES335 and was not happy with it. It felt cheap and needed some work to get it playable. Im hope that this Bonamassa is not the same since its nearly twice the price too.

The only things that matter to me is the neck and tuning stability Everything else is a complete waste to spend a significant amount of time, energy and money on- just change the damn pickups/electronics etc but keep in mind that there will not be magical changes between pickups that we may all want there to be At the end of the day you can pursue the short-lived dopamine hits of lusting after gear but the real hit is from learning to actually play