Love a good chicken bog recipe!! Thanks for sharing here on the channel. Happy Holidays Bobbie!

Hey there @peugeot_air thanks for watching! The blade materials really depend on the manufacturer and types of discs you intended on using in the field. If you find they are wearing out too quickly, it might be a problem with the diameter or type of blade you are using in the soil. You can check out all our tillage & blade items right here at www.agrisupply.com/disc-tillage-tools-blades-sweeps/c/4500000 Have a great day!

Love to hear it! Appreciate the kind words @irishpirate6779 Come see us again soon!

Specifically speaking of an on demand water heater, more than likely yes - but we would recommend checking the manual to be sure. You must have enough gas pressure to meet the demands of a tankless heater. If the pressure does drop and you are putting a demand on the water heater which could affect it's output. Thanks for your comment & checking out the channel! Happy Holidays!

@AgriSupplyCo thanks happy holidays

Appreciate you checking us out! Glad you enjoyed the video with Keul. He sure knows his stuff!

Thanks for reaching out with your question. We have sent this over to our techs to see if we can provide you with a little more info. If you'd like to speak with our Customer Care team - feel free to call us directly at 1800-345-0169. We will get a message back to you tomorrow about your tire question here. Appreciate your patience!

Good Morning! Wanted to reach back out about your question. In regards to the tires, really cant tell you per say the biggest tire to go with because there are a few other factors that will change the dimensions needed for your wheels. We would recommend checking with John Deere so they can tell you 100% the match you are looking for. Based on specs from John Deere, however, we do not carry that particular size in either front or back tires currently. Here are the specs from the manufacture if helpful below. Appreciate you taking the time to reach out, thanks! Front Tires: Two 22.5 x 10-8 4 PR all-terrain on steel wheels OR Two 22.5 x 10-8 4 PR turf on steel wheels Rear Tires: Four 25 x 13-9 4 PR all-terrain on steel wheels OR Four 25 x 12-9 4PR turf on steel wheels

Nice! Thanks for sharing and for watching - let us know how everything works out.

Thanks so much for watching! Really appreciate that and glad we could help you out. Yeah Keul sure knows his stuff!

Thanks so much for watching! We are glad you enjoyed the video & were able to get the info you needed. Have a great day!

Thanks for watching! This particular rope applicator is just hand-held and you brush it across your garden sections where you want to remove weeds. You would soak the rope sections in herbicides then apply it by walking up and down your rows. We also carry an ATV model as well for larger fields. You can see all the models we carry on our website here: www.agrisupply.com/wick-applicators/c/4200053/

Thanks for watching!

So glad you enjoyed the sprayer video Mike! Thanks for watching.

Thanks for reaching out to us with your question! We have a wide selection of regulators and hoses available here on our website: www.agrisupply.com/regulators-hoses/c/6200013/ Not exactly sure which model or PSI you might be looking for, but take a look and let us know if we can help answer any more questions you might have. Have a great day.

Thanks for reaching out Kim! If you have a moment to reach out to our Customer Care Center at 800.345.0169 we can help troubleshoot what issues might be causing this to occur on the sprayer with your fuses.

Thanks for reaching out Clifford! I have sent your question here to our techs to see if we can get you some troubleshooting help & an answer about the sprayer fitting. In the meantime, feel free to reach out to our Customer Care Team at 1800-345-0169.

Appreciate your patience - Our team has let me know that we recommend replacing the entire tank unfortunately. We couldn't say with total confidence that it wouldn't still leak by simply trying to replace the fitting, and even more so since it's located on the bottom of the unit & would be heavy once you add-in any liquids. If you need any other info on the Fimco sprayers we sell, please visit the site: www.agrisupply.com/ag-lawn-sprayers/c/4200110/ Or give us a call anytime! Thanks Clifford.

Thanks for dropping us a comment! Absolutely - we are here for what you need on the farm, and if we don't have it in-stock we will do our best to get it. Let us know if you have any questions on blades or harrows when the time comes. Enjoy the rest of your week!

Thanks for watching! We would recommend you run through the soil at least a couple times (preferably cross directionally once up/down and once side to side) to pull out any really thick weeds. The spider gangs are primarily used to help cultivate the soil by loosing it up, and providing those rows you will be need before planting. If you have compacted soil/sod using a disc harrow or s-tines first might be a good idea to really loosen it up prior to the spider gangs going down. Let us know if we can help with anything else!

Thanks for reaching out with your question here for the Fimco sprayer. We have forwarded this onto our techs to see if we can get some solutions for you to troubleshoot! In the meantime, please feel free to reach out to our Customer Care Center at 800.345.0169. We will reply back to you here on this comment shortly!

Thanks for your question ReaperDawg! Typically if you are frying you'll want to have a higher PSI to your burner output and lower is acceptable if you are doing something like a low country/seafood boil. We recommend you check the manual for your crawfish burner first just to be sure, but if you are in need of a replacement regulator hose we can have our team look over the burner you have, and suggest a specific item number. Feel free to reach out to us directly at 800.345.0169. Have a great day!

Hi there Rjrice - thanks for your question. We are checking on this with our technicians to see if we can get you some answers on the sprayer/fuse issue you're experiencing. In the meantime, feel free to connect with our Customer Care Center at 800.345.0169. They may be able to more quickly get you some tips for troubleshooting this. Appreciate your patience, we will post another response shortly!

Thanks for watching! Glad you enjoyed the video.

Appreciate your comments & for taking the time to watch our video! To answer your question - there is really no true "one size fits all" approach to how long your blades will last. As Keul mentioned above, it will often depend on the performance itself and just carefully watching how the blades are cutting into the soil. Many factors will effect your blade's lifecycle such as outdoor elements/weathering, how often they would be used and the types of soil (heavy/rock versus softer/sandy). We generally recommend if your original size is diminished by 10 to 15% then it's probably time to replace those worn out blades. Hope this was helpful, have a great day!

Thanks for watching & your question! We agree that the bearing bolts can be tough to get out. This video was a little tricky cause we used a newer harrow that had not seen much action yet in the field! We highly suggest a day before you plan to remove your blades or parts, spray down those sections with a good penetrating oil to help lubricate the area you will be working on. Hope this helps! If you have any other specific questions, feel free to reach out to our Customer Care Center at 800.345.0169

Thanks for watching & visiting the channel!

Thanks for watching! Glad we were able to help out with your disc replacement project. Have a good one!

Hi Mike - You are partially correct but due to your scenario here, we feel this is a little too close for comfort! If you have a moment to connect with one of our techs, we can help troubleshoot the sizes you have here and make sure you have the right setup for your harrow working drag area. Feel free to email the Agri Supply team @Agri Supply Tech Thanks for watching & leaving us your comment! Look forward to speaking with you.

Thanks for watching & for your question! We have found in our experience you can sometimes find these at local farm auctions or tractor retailers in the size you mentioned. However, we carry both a 6ft. and 7ft. option if you want to take a look at our website links below. Let us know if you have any other questions we can answer! www.agrisupply.com/6-ft-cut-disc-harrow-20-blade/p/108010/ www.agrisupply.com/model-500-disc-harrow/p/63457/

Afternoon, thanks for reaching out with your comment! It looks like we currently only retail one specific tractor tire in the 13inch. size you noted. Encourage you to take a look at our entire catalog by visiting our website & clicking here: www.agrisupply.com/tires/c/5500001/ If you still don't see the tire you need, please take a moment to dial up our Customer Care Center at 1800-345-0169. We'd be glad to see if we can get you the right tire you need ordered & sent out to you directly. Have a great day!

Let us know if you have any questions! Have a good weekend.

Gracias por tu comentario! Hacemos envíos a Puerto Rico. Le pedimos que se comunique con nuestro equipo de atención al cliente para obtener más información al 1800-345-0169 o visite nuestro sitio web en www.agrisupply.com.

Morning RogerSayers, Thanks for reaching out. We are checking with our technicians in regards to your question to get some suggestions sent back your way and a possible part number. Will message you back here shortly!

This should be the shut-off valve you need here: www.agrisupply.com/single-nylon-shut-off/p/81245/ If you have any other questions, feel free to reach out here on KZbin or call our Customer Care Team at 1800-345-0169. Thanks, have a great day!

Thanks for watching!

Thanks for watching!!

Morning TimberXX, That would be our Monroe store location close to Charlotte, NC and then our Garner store. We also have retail locations in VA, GA and SC! Thanks for checking us out. 😄

@@AgriSupplyCo excellent! Thanks for the quick response.

Hi there @pr0pman, appreciate your question! We would suggest looking for the number cast into the body of the cross section. If that doesn't provide the answer to your question, the first number in the number cast into the yokes should also be the series. If that doesn't work, we recommend measuring & comparing the size. We would be more than happy to walk you through troubleshooting if you have a moment to give our Customer Care Team a call at 800.345.0169 Have a great day! 🙂

Thanks for your feedback @harrytuttle8161 We'll let our team know!

Really appreciate that! Thanks for checking the channel.

Thanks for commenting. Typically speaking, yes that is correct. We always recommend checking the user manual for which works best for your burner. Appreciate you checking us out!

Thanks for checking us out DavidBryan9568! Glad you found some value in our video here. If we can help answer any other questions about your Carolina Cooker product, please let us know.

Thanks for watching! Have a great day.

Thanks for sharing your video! Looks like a great time cooking.

Thanks for watching DaReadlest38, so this high pressure burner for the discada stand uses a 10PSI regulator hose. You can find out more info on this particular burner by clicking here: www.agrisupply.com/32-discada-burner-stand-m116672/p/116672/ Have a great day!

Morning Downstream-Outdoors, thanks for watching!

Awesome! Thanks for watching Kenneth. Glad we could help you out on your harrow project.

Appreciate you dropping us a comment here on the sprayer video! Which model in particular were you interested in? The spot sprayer model? Would be glad to send you some more information on any of the Fimco Sprayers we carry - thanks!

Happy to hear you enjoyed our video Cutweldngrind2752 - Good luck with your build!

Hi there Nickstave5040, Thanks so much for your interest in our Grizzly Tillovator shown here! We have been selling this brand since 2010, and it has been meeting the needs of many customers since then with minimal returns or problems. Its gear-driven feature is a plus, meaning less maintenance down the road. This particular tillovator is manufactured internationally in factories that are sourced and visited by our quality control team to ensure only the highest level of quality. We stand behind all our products 100%, and if you ever have an issue or question regarding your purchase, we are here to help! Feel free to check out the entire selection we offer by clicking here: www.agrisupply.com/tillovators/c/2000029/

@@AgriSupplyCo is this forward or reverse direction tiller? Thanks for all your assistance

Appreciate you reaching out Perrinpartee557. Glad our videos were able to help you with your project. Thanks for being a customer! 😃

Thanks so much! Glad you enjoyed our video.