I built one of those from scratch. Soldered everything myself too.
@mtmadigan8211 күн бұрын
Wow
@bobhatesrainbows15 күн бұрын
So cool.
@CHIBA280CRV Жыл бұрын
sweet product , any hardness testing done on the brass before and after ? That way it’s known to work , not just color changing ..thanks if you can make a video n the results..👍🏼👍🏼👍🏼👍🏼👍🏼
@RimfireAddicted703 жыл бұрын
Watching the rotation the case is barely getting a full rotation before leaving flame. I'm curious if they are uniform in treatment. It appears the turn table not the indexer is either too slow or the index table holes are too large and allowing cases to lose rotation as it travels around large dia. Might consider making bushings to fit calibers more closely. There is another annealer very similar at less than 1/2 the cost that has them.
@sassybrass56453 жыл бұрын
Hi Jory, The rotation is driven by the drive motor rotation, it makes a 360 degree rotation for each case loading onto the annealing station, however, the case is on station for a slightly reduced slice of that rotation. We recommend using two torches during the annealing process to ensure total heating coverage. We do offer different size carousels with smaller holes or thinner profile etc. to accommodate different calibers when needed, all while still maintaining auto feeding capability using industry standard case feeders. Thanks for your feed back!
@jimmywilliamson85403 жыл бұрын
I have recently seen a system that appears to do it completely electrically without any kind of flame in about 2 to 4 seconds ?
@sassybrass56453 жыл бұрын
Teaming up with the Annie Annealing system soon to offer induction annealing, see Flexion Annie Annealer
@lucasoldaker21583 жыл бұрын
Whats the price?
@additudeobx4 жыл бұрын
This is a great setup. I like it and it's on my list. I'm looking around right now. I want to try salt bath first and I ordered parts already. If that doesn't work out, I'll be back. Thanks!
@jimboisvert57814 жыл бұрын
I was also going to try salt bath, but the current literature online states pretty convincingly that salt baths don’t fully anneal case necks and shoulders. This unit certainly has potential though.
@additudeobx4 жыл бұрын
@@jimboisvert5781- I think that is someone's opinion. In order to subscribe to that theory you will also need to subscribe to the belief that the source of "temperature of the heat" from flame, or that the source of "temperature of the heat" from induction is somehow different than the source of "temperature from salt bath". The physics of annealing is a simple process, it's not complicated. The metal is heated to a temperature that causes the molecules to realign. The problem is not heating it enough or heating it too much. A problem is not the source of the heat.
@br54494 жыл бұрын
skip to 6:59 to see the silver case dropping
@sassybrass56454 жыл бұрын
You found it! It worked great as well!
@sf77084 жыл бұрын
Nice! Will this work on the Dillon 1050 case feeder?
@rudolphferdinand36345 жыл бұрын
How have you determined the heat 🔥 flame temperature?
@volvosan5 жыл бұрын
since the brass case is being rotated, I don't see the need for 2 torches.
@sassybrass56455 жыл бұрын
WWW.SASSYBRASS.COM
@MakoPCandNetworking5 жыл бұрын
Are you still selling these kits? I don’t see them on your site for purchase
@knownknot6 жыл бұрын
that is real neat & fast thank you / this is the first I have seen that is not hella expensive!! I
@ForceMultiplier6 жыл бұрын
not as much gap in between the wall of the feeder and the shell plate. I thinned the tubing out a bit with a box cutter, and it seems to be helping quite a bit. Going to add some plastic to the exterior mouth opening on the right side to help close the window the cases can fall out of. I use to do that with cardboard, but am going to do a permanent fix this go around. It's worth $20 to support the inventor.
@DonziGT2306 жыл бұрын
Mine doesn't have these problems. Mine doesn't have that big gap between the plate & hopper wall so apparently there was a production change or something.
@markjanzen42406 жыл бұрын
I just ordered this from you with the case drop tube attachment. Thank you for the wonderful improvement! I’m looking forward to it.
@crustydogdog68426 жыл бұрын
A while back, when doing due diligence prior to my purchasing a Hornady Case Feeder, I came across the above video. I had seen a few other items similar - but a picture (video) is worth a thousand words - I bought the "Traffic Cop" right then and there, prior to buying the actual Hornady Case Feeder. A couple of days after my Traffic cop arrived, my new Hornady Case Feeder arrived. I installed it meticulously and did some test runs. The case feeder linked up well and as advertised - a fine Rube Goldberg machine! However, I got 3 jams within 5 minutes. I then installed the Traffic Cop and have not gotten one jam since - period. If you made a $300 plus investment - why wouldn't you invest few dollars more for a major improvement?!?!?!?
@VernonDozier15086 жыл бұрын
I'd like to order but the cart on their website is messed up.
@roniwamiya22167 жыл бұрын
This thing works like a charm! No more brass getting stuck between the shell plate and the feeder which also prevents the brass shower. I have only used it with 9mm but after 1000 rounds or so, it made the reloading session much more pleasant. Hornady should include this with all of their case feeders.
@goajcats7 жыл бұрын
worth every penny, no longer have to empty the bin every 50 rounds or so, finally makes my case feeder work right. thanks
@sassybrass56457 жыл бұрын
Great to know it resolved the issue for you, now you can get back to the range rather then clearing the jambs! Please let us know if you need any other solutions! Thanks for the reply, very encouraging!
@xexorz5 жыл бұрын
Gold
@rwnelissen7 жыл бұрын
Just want to tell you how much I love your case feed traffic cop and case cage. I was so frustrated at one point because the brass repeatedly got stuck between the plate and the wall of the container that I almost sold this case feeder on Ebay. I just happened to stumble across your video here on KZbin and was sold, Got it in 3 days and had it up and running the same day. very easy installation, At one time I used a cut off 12 ga. shotgun shell for the case cage but I must say your clear plastic solution is so much more elegant I have not had one case feeding problem ever since installing the feed traffic cop. Well worth the $14.95 Thanks again
@sassybrass56457 жыл бұрын
We are so glad that this resolved the case feeding issues for you as well. Also, thanks for the kind words and the review, very exciting for us to know we are making a difference for you!
@mikegold44547 жыл бұрын
Have spoken to Randy many times very nice guy to talk to with a great knowledge of Hornady LNL problems. This system he devised is the fix all for every Hornady reloader. He is just a average guy like me looking to always improve on something that causes us problems. Very quick to return your phone call. Thanks Randy
@sassybrass56457 жыл бұрын
Mike, thanks for the order, your Case Traffic Cop and Case Cage were shipped out on 01/04/17 from Modesto, CA. Visit www.SASSYBrass.com when your friends from the gun club are ready to order theirs!
@sassybrass56457 жыл бұрын
Mike, I also did some research on the 9MM case tipping issue that we are experiencing, here is a YT video with a possible solution: kzbin.info/www/bejne/r6Goh6h5eN-pZ7c
@mikegold44547 жыл бұрын
Thanks Randy i will call them on Monday and inquire if they would help me out I wish he had a mentioned if there was a different part number other than #8 for 9mm. Thanks again Mike
@mikegold44547 жыл бұрын
Is this home made? if not where can i buy it and what is it actually called Thanks please e-mail me [email protected]
@mikegold44547 жыл бұрын
Thanks for the quick response please let me know how much shipping is to 08723 Nj when i did it, it seemed to be twice the price of the parts please let me know thanks Mike Gold
@mikegold44547 жыл бұрын
Happy New Year to you by the way I like the two items and have a problem with both issues good idea to fix it
@sassybrass56457 жыл бұрын
Hi Mike, These are available from our web site, www.SASSYBrass.com I gave them the name Traffic Cop and Case Cage. They are available for just $14.95 for the parts including shipping!. They are available to be shipped out on 01/04/17, Happy New Year!
@TallyWacker7 жыл бұрын
I'm looking forward to less case feeder jams. Thanks!
@Rudys78 жыл бұрын
This is a great idea! Thank you for sharing!
@gz9898988 жыл бұрын
what's the price on this unit?
@sassybrass56457 жыл бұрын
Gustave, have you visited the www.SASSYBrass.com site for pricing information on our Brass Annealing System?