Case Feed - Traffic Cop, keeping order! www.SASSYBrass.com

Case Cage & Traffic Cop - Fixes your Hornady LNL Case Feeding issues by clearing the traffic jams in the case feeder and eliminating the shell case bounce off the feed ramp. Visit www.SASSYBrass.com for more info.

[@rwnelissen]

Just want to tell you how much I love your case feed traffic cop and case cage. I was so frustrated at one point because the brass repeatedly got stuck between the plate and the wall of the container that I almost sold this case feeder on Ebay. I just happened to stumble across your video here on KZbin and was sold, Got it in 3 days and had it up and running the same day. very easy installation, At one time I used a cut off 12 ga. shotgun shell for the case cage but I must say your clear plastic solution is so much more elegant I have not had one case feeding problem ever since installing the feed traffic cop. Well worth the $14.95 Thanks again

[@sassybrass5645]

We are so glad that this resolved the case feeding issues for you as well. Also, thanks for the kind words and the review, very exciting for us to know we are making a difference for you!

[@goajcats]

worth every penny, no longer have to empty the bin every 50 rounds or so, finally makes my case feeder work right. thanks

[@sassybrass5645]

Great to know it resolved the issue for you, now you can get back to the range rather then clearing the jambs! Please let us know if you need any other solutions! Thanks for the reply, very encouraging!

[@xexorz]

Gold

[@mikegold4454]

Have spoken to Randy many times very nice guy to talk to with a great knowledge of Hornady LNL problems. This system he devised is the fix all for every Hornady reloader. He is just a average guy like me looking to always improve on something that causes us problems. Very quick to return your phone call. Thanks Randy

[@sassybrass5645]

Mike, thanks for the order, your Case Traffic Cop and Case Cage were shipped out on 01/04/17 from Modesto, CA. Visit www.SASSYBrass.com when your friends from the gun club are ready to order theirs!

[@sassybrass5645]

Mike, I also did some research on the 9MM case tipping issue that we are experiencing, here is a YT video with a possible solution: kzbin.info/www/bejne/r6Goh6h5eN-pZ7c

[@mikegold4454]

Thanks Randy i will call them on Monday and inquire if they would help me out I wish he had a mentioned if there was a different part number other than #8 for 9mm. Thanks again Mike

[@markjanzen4240]

I just ordered this from you with the case drop tube attachment. Thank you for the wonderful improvement! I’m looking forward to it.

[@roniwamiya2216]

This thing works like a charm! No more brass getting stuck between the shell plate and the feeder which also prevents the brass shower. I have only used it with 9mm but after 1000 rounds or so, it made the reloading session much more pleasant. Hornady should include this with all of their case feeders.

[@crustydogdog6842]

A while back, when doing due diligence prior to my purchasing a Hornady Case Feeder, I came across the above video. I had seen a few other items similar - but a picture (video) is worth a thousand words - I bought the "Traffic Cop" right then and there, prior to buying the actual Hornady Case Feeder. A couple of days after my Traffic cop arrived, my new Hornady Case Feeder arrived. I installed it meticulously and did some test runs. The case feeder linked up well and as advertised - a fine Rube Goldberg machine! However, I got 3 jams within 5 minutes. I then installed the Traffic Cop and have not gotten one jam since - period. If you made a $300 plus investment - why wouldn't you invest few dollars more for a major improvement?!?!?!?

[@Rudys7]

This is a great idea! Thank you for sharing!

[@DonziGT230]

Mine doesn't have these problems. Mine doesn't have that big gap between the plate & hopper wall so apparently there was a production change or something.

[@br5449]

skip to 6:59 to see the silver case dropping

[@sassybrass5645]

You found it! It worked great as well!

[@ForceMultiplier]

not as much gap in between the wall of the feeder and the shell plate. I thinned the tubing out a bit with a box cutter, and it seems to be helping quite a bit. Going to add some plastic to the exterior mouth opening on the right side to help close the window the cases can fall out of. I use to do that with cardboard, but am going to do a permanent fix this go around. It's worth $20 to support the inventor.

[@MakoPCandNetworking]

Are you still selling these kits? I don’t see them on your site for purchase

[@sassybrass5645]

We are, they are $20, and can ship on Monday

[@sassybrass5645]

Hi Brandon, if you go to WWW.SASSYBRASS.NET, scroll to the bottom of the page, Products, Hornady Case Cage, Add to Cart. Will ship on Monday.

[@TallyWacker]

I'm looking forward to less case feeder jams. Thanks!

[@sf7708]

Nice! Will this work on the Dillon 1050 case feeder?

[@sassybrass5645]

Hi Jim, sorry for the delayed response. I have not tried it on the Dillon Case Feeder, woundering if you have the older style (650 XL/1050 Case Feeder - Dillon 97074) or the newer one?

[@sf7708]

SASSYBrass, I probably have the older case feeder as I bought my super 1050 in 2002.

[@sassybrass5645]

@@sf7708 That's what I have as well, however, the Dillon does not have the gap that Hornady has on my Dillon, it has a metal shroud on the top right side. But, I just have the small rifle plate, do not have any of the pistol plates for it. Do you have a 1/4 inch gap between the plate and side wall?

[@sf7708]

SASSYBrass, just took a look at gap on shell plate, it’s for 9mm, and it’s only a 1/8” gap or so. I’ll have to keep working the idea. Maybe a wire tie worked in there somehow will do the trick. I’ll let you know...

[@VernonDozier1508]

I'd like to order but the cart on their website is messed up.

[@sassybrass5645]

mike L I will check it later tonight, what browser are you using?

[@sassybrass5645]

mike L I see that the shipping is getting set incorrectly after the last upgrade, I will eat her credit you or will let you know when I get the site fixed.

[@sassybrass5645]

Mike L, I updated the site to properly select the shipping by product (free for the Case Feeder - Traffic Cop & Case Cage), please revisit the site, it should be processing correctly now for you.