When a load sits on a graded surface (especially as steep as stairs), the shift in the center of gravity makes it nearly impossible for our air beams to stay properly inflated. They will compress at one end, forcing all the air to the other end, and therefore not achieve the desired mobility. Simply put, the scenario you describe has too many factors that unfortunately impact the necessary load equilibrium for our products to work as intended. But thanks for your questions which help us explain the nuances of our products even if they reveal certain limitations of our technology.

The pan itself is an American-made product by EL Mustee out of Ohio and not a European model. EL Mustee makes a wide range of kitchen/bath/laundry products sold in the US online and through many brick-and-mortar outlets and has been around since 1932. However, we agree this is far less common drain pan configuration than the continuous plastic edge models which remain a serious challenge for removing laundry equipment. We continue experimenting with new Airsled product designs to solve the continuous edge problem but no luck yet.

​@Airsled What about something like a pvc pipe on both sides of the ledge? Just a little taller than the ledge, so it doesn't touch when you pull it over. Then maybe on the outside, place 1 smaller pvc pipe so it's like a step down off the first pipe

We appreciate your input and using pvc pipes in different arrangements has been attempted. The core issue with continuous edge models is that the edge is too tall making it impossible to properly slide and position our air beams under the machine. Since the air beams cannot be properly placed under the load, they cannot produce the necessary lifting force. We've tested some new air beam designs that are encouraging but more work is needed.

Yes. All Hover Blades come with four plastic sheets designed to create a smooth, nonporous track over the carpet. You can see this in another Airsled video showing one of our Appliance Mover models moving laundry equipment out of a closet onto a carpeted hallway. Take a look at the 0:23 mark showing how the panels were taped to form a mat: kzbin.info/www/bejne/aJuqlnt5fKeJebM

Me too! Simple yet brilliant!

“If you wish to have peace and contentment, release your attachment to all things outside your control.” ― Epictetus

Thanks for being a fan and a satisfied customer. We're happy our products have helped you avoid potential "UH-OH" situations.

Not possible with our products.

Our product is an Airsled Appliance Dolly and has the two holes you mention by design for the clevis pins. We cannot speak for the AllDolly (not made by Airsled but made by the AllDolly company). AllDolly models do have screws in that location we believe.

@@Airsled wow, I thought they were the same make. Almost identical units

It won’t unless you use the 4 included plastic sheets to create a smooth nonporous track or some other product like floor protection paper. This video shows both. How to Move Delicate, Heavy Furniture Over Carpet with an Airsled kzbin.info/www/bejne/oZvZm5KbmK1knMk

Thx for the feedback. We, along with your chiropractor, agree you made a wise choice purchasing our product.

We hope this one registers higher on your manliness scale How to Move a Nearly 2,000 lb. Safe with an Airsled kzbin.info/www/bejne/Z3zVnGiwhMeBick

Yes - air blower included with the Airsled system shown in video. Here's a link to our Light Duty AM1200-VS airsled.com/product/light-duty-appliance-mover/

Ahaha mine is in a closet and if I put that pvc under there the top dryer would get stuck on top 😂

We agree that an AllDolly is a very capable tool, especially for specific use. Our close interactions with LiftCart customers, including appliance servicers, installers, and home builders/renovators, reveals they are very satisfied with the LiftCart's much broader range of performance and functionality, especially in cases where ovens are in a corner/against a wall or close to a kitchen island where the AllDolly may have limitations. These customers may find your comment to be in the fringe minority.

@@Airsled personally, I have never had an issue where the Alldolly did not work. Therfore, I'm now part of the "fringe majority"...

I have both AllDolly and Airsled Liftcart, only thing with AllDolly you can't use it to take down a microwave over the range especially the older heavy microwave for a one man servicer.

I use Alldolly for all wall oven projects. But came across the oven with almost no clearance on the right side where it almost touches the wall. I haven't tried my Alldolly yet but thinking it would be much easier to use a Liftcart, which I don't have and that's why I'm here researching alternate options for Alldolly. Harbor freight lift table is too heavy to carry around (over 80 lb), but Liftcart being 51 lb is an attractive though pricey option. I wish they offered discounts. kzbin.info0l_L2ngjLvM?si=XQj-1RUF5JK9_NUN

@@harnick77 We did much research on this topic before committing to the development and launch of our LiftCart. At the time, the most common solutions included an AllDolly (non-lowering/lifting version), a 500-lb. rated Harbor-freight type hydraulic cart, and a drill-powered, 300 lb. rated mechanical scissor lift like Southworth Lift-Tool. Each option had pros/cons and we felt there was an opportunity to introduce an Airsled solution that captured many benefits of these options but recognize that our product may not check every box for every person. The feedback from LiftCart customers, especially appliance servicers, has been overwhelmingly positive and we're happy to be in the solution mix as you evaluate options.

You may be surprised to learn that in the vast and diverse world of vending, there are plenty of facilities with delicate flooring, buildings/landlords with specific risk-management policies, corporate safety protocols, vendor manpower limitations, and equipment installation configurations where our products are helpful and sometimes necessary compliments to, and not substitutes for, pallet jacks to move vending equipment. Should you encounter such scenarios, we're here to offer options.

Appliance techs use air shims to help level appliances. Follow this link for one option… a.co/d/i0l1zYS

Absolutely but we recommend our 1/2" thick spacer sticks to get a more optimal lift. This simple video explains why: kzbin.info/www/bejne/g6icaH14hs5srcksi=p4go8nJ4Yr5kWi6s You can make your own spacers from plywood or purchase ours here: airsled.com/product/32-spacer-sticks-4/

Yes. But you must have a smooth, solid surface. If the surface is blacktop or rough concrete, you will need to create a smooth, solid track with either our Rough Surface Adapters (RSAs) or something like masonite/hardboard sheets.

@@Airsled thanks. Will do; currently getting all my ducks in a row before embarking on this moving business

Shoot us an email to [email protected] and we'll help answer your questions in detail but in a nutshell, the center, lower drawer panels conceal a cavity for the blower and two air beams are running along the long axis of the load's base. A secondary switch was installed near the countertop to avoid having the reach for the switch on the blower.

Yes - our systems work on most commercial, rubber gym flooring surfaces. Some have a pretty rough, anti-slip texture that can reduce Airsled performance due to air leakage. In those cases, you may need to use either our Rough Surface Adapters (RSAs) or something like masonite/hardboard sheets to create a more smooth, solid track.

We're frequently asked by customer's if a truck's outlet can be used to power the LiftCart so they can load items into/out of their truck bed. This shoot gave us an opportunity to visually demonstrate the capability and also highlight our 30x30 LiftCart XL top to help our customers envision various applications of the LiftCart.