1torqued6point0

Пікірлер

@Zayshy 5 күн бұрын

Is the 3.5 engine good? Like why people don’t like them?

@chuckconnors615 18 күн бұрын

How important is the HONDA Trans fluid? Or is the Valvoline / Penzoil / etc fluids for the Trans???

@VINZBROWN 5 күн бұрын

VERY important ... from what I've seen mannnnnny experts say.

@chuckconnors615 18 күн бұрын

This is a nice , descriptive video. I am thinking the solenoids you tested here are FORWARD gears ??? What if your issue is the REVERSE gear? does the overdrive solenoid you pointed to ever give problems ??? Thank you from HOUSTON

@ocavant 29 күн бұрын

Most cars at this point need new injectors, so throw a set in while you are in there. Also, you should pre-oil the shafts before you dry start the engine.

@gotredeemed Ай бұрын

Thanks. I have this problem and hopefully, this is the fix.

@roadrider1959 2 ай бұрын

Looking for the Amazon link for the solenoid and I don't see it. Am I over-looking it somewhere?

@dontecox6389 7 ай бұрын

Can you make a video showing how to disassemble the Exhaust and Intake from the Engine Rocker Arm

@MrOctNot 7 ай бұрын

WHY does Chrysler say that this "complete assembly" WILL NOT fit a 2008 4.0 v6 ? The "complete assembly" part fits a 2007, and every individual part listed for 2008 ALSO fits the 2007. Strange?!?

@andresherrera398 7 ай бұрын

I don't have to turn the cams to set the rocker arm assembly?

@onzer8080 8 ай бұрын

...

@kadenhall829 9 ай бұрын

Hay I’m new to this got a 2010 dodge charger do they fit as well ?

@fofodiy 11 ай бұрын

Does it have to be tdc before i installing??

@vincem1957 11 ай бұрын

wheres the link for the solenoid?

@real-worldcontent7745 11 ай бұрын

And it's a good idea to cover the intake holes with a rag while your working on it

@TomBleecker 11 ай бұрын

Any idea where I might buy this solenoid for a 1983 4-speed automatic trans?

@djcezile9631 Жыл бұрын

By the way, make sure that you torque it to only 23 ft/lbs; if you try 31 ft/lbs it’s gonna strip, (happened to me). So be careful, the guy in the video meant 31 n/m, which converts to 23 ft/lbs. I’m sure it was an honest mistake.

@yoyoyo19992001 7 ай бұрын

@djcezile9631's comment needs to be pinned.

@punkpraise 26 күн бұрын

Hello thank you for this, im aboutta replace my rocker arms and was wondering how much torque is needed

@chrisrose5503 Жыл бұрын

When did Chrysler come out with the updated valve train design.

@Erated78 Жыл бұрын

Thank you for this video, it’s well done with all the important information we need. My 2010 300 with 3.5l only has 70,000 miles and inevitably will lead to me having to do the rocker shafts. Super helpful video, thanks again and cheers

@kenkerr7048 Жыл бұрын

3 big things then a lot of little things lol, question, do you have to soak the lifter in oil or do they pump up when running? I’m going to be doing mine soon. I hope it hasn’t messed my cam up. When it gets bad I usually turn it off then start it again and it stops.

@mikhailzapata1993 Жыл бұрын

Did u find the amazo link?

@frankieboy2417 Жыл бұрын

There has always been a ticking noise with my 2005 300 and now there is a knocking noise so I shut it down and going to do this this vid is good enough for me.

@mex5341 Жыл бұрын

what ws the problem? solenoid ?

@jaym5938 Жыл бұрын

You got to make your money, but it's still pathetic and corrupt telling a customer to repair the transmission when they know it's just a shift solenoid. I have no respect for dishonest people.

@guadalupemacias4906 Жыл бұрын

Nice video

@berthamiles6507 Жыл бұрын

Thank you for your honesty I will try to do this.....but would love to know what solenoids off of amazon you have had good luck with. Thanks!

@jesseperez7363 Жыл бұрын

I did this test and yes, black plug solenoid was weak. Unfortunately they're Not cheap around here and for the EX transmission are harder to find cheap.

@mienteroso 2 жыл бұрын

You never posted the Amazon seller. Great vid btw

@user-sp7tp5mj4c 2 жыл бұрын

Hi just curious where did you order the full rocker arm and shaft assembly from ..thanks

@Powderr4 2 жыл бұрын

Did u have to soak it oil before u instal or did u just put it straight n?

@T0tenkampf 2 жыл бұрын

Thanks for the good info on the updated part number!

@gregorybehman9136 2 жыл бұрын

bad Rocker arm can cause engine shake?

@matthewharding4036 2 жыл бұрын

Great video man! People like you are what this world needs more of, thanks for keeping it real and helping out us DIY guys out there. 👍

@carchk2054 2 жыл бұрын

Hello and thanks for the video. Can you provide a link to the Amazon part that you purchased to repair the shifting problem. I didnt see it attached to your video. Oh of course, did the new solenoid solve the problem? Thank you

@jamondrake7834 2 жыл бұрын

Best video for this situation I’ve ever seen even w/o details. Would love more for the 3.5 Chrysler! I hv an 06 learning and doing everything myself, so I need these vids!!

@BroncosFan303 2 жыл бұрын

Im in denver to bro, do u do custom tuning?

@courville70544 2 жыл бұрын

Would these be the problem as well if it doesn’t want to shift after the car warms up? My 2002 Acura TL will go into all the gears from a cold start. Then once warm, won’t shift into any gear.

@1torqued6point0 2 жыл бұрын

It could be, the warmer the fluid gets the thinner it is and is harder for solenoids to push it if they're worn out. I would check the fluid and my sure it's good first. Also sometimes when electrical components heat up they will struggle

@schmidt76ful 2 жыл бұрын

So that’s first to second gear right

@1torqued6point0 2 жыл бұрын

The are different solenoid packs so it's going to depend on what your transmission is doing vs. What solenoids to replce.

@MrOverclocked92 2 жыл бұрын

What supplier on Amazon do you prefer for this part?

@1torqued6point0 2 жыл бұрын

I'll have to look when I get a chance, this was a while back I'll see if I can find who I went through

@shawnchi7189 Жыл бұрын

Amazon link ?

@teds4983 3 жыл бұрын

It was getting it, while it can...

@big9914 3 жыл бұрын

Mine can do this but my turbo boot pops

@tc1254 3 жыл бұрын

Torque it to 11ft lbs and I mean torque it not “oh it’s tight”

@yakswelding86 3 жыл бұрын

Sounded like a thousand angry cats that wanted to scratch your face off. No cats were injured in the filming of this video.

@marcosrocha6997 3 жыл бұрын

my tick is very little (probably just one) and still disperses fresh oil onto the rockers and has all lashes could i still drive it?

@1torqued6point0 3 жыл бұрын

Hey I'm sorry I am just seeing this, yes you can still drive it especially if it is still getting oil. Your problem is probably a slack adjuster. it will not be at optimum, but will be ok to drive until you get a chance to fix it.

@johnniebradley3101 2 жыл бұрын

Do you need to bring a cylinder to tdc?

@fernandosebastian6232 2 жыл бұрын

@@1torqued6point0 we

@zx14forme1 3 жыл бұрын

Any updates?

@1torqued6point0 3 жыл бұрын

I will post a video soon. I made another one but never posted it. I opened a performance shop since this video and drag week got canceled so all my time, money and effort went into the shop. But right now the car is basically stripped, cut in half, and halfway painted. I have a fabricator in my shop and he will be building the turbo headers and stuff so I will try and push out updates soon. I will try and do better about posting videos, we've been pushing out more videos about the shop and my street car foxbody but I will make sure and try and get one of the drag build out.

@sunsetdiesel 4 жыл бұрын

What did the nitrous system cost and where did you get it

@1torqued6point0 4 жыл бұрын

Man honestly it's been on the truck for like 7 years now. It started off as a simple Zex diesel system I've put them on a few trucks awesome bang for your buck system.

@ShadeTreeMechanix 4 жыл бұрын

Looking forward to some videos on this. I've got a big block fox and trying to decide on whether to go turbo or not. Just a factory 460 with a performer intake and some headers. She's a slow girl but man the torque. lol.

@1torqued6point0 4 жыл бұрын

I failed on responding like I figured I would lol. Even a 460 swapped fox oxy runs good were hoping to make some good power on a "budget" even though we know that doesnt make sense but I guess a budget for what it is. Works slow right now so may take longer than expected but I'll try and post progress videos

@geotracker30 4 жыл бұрын

how big of a shot were you running?

@1torqued6point0 4 жыл бұрын

Varies usually was a 200-225

@dirtbikejunkies6360 4 жыл бұрын

What is the steam coming from the hood

@chrisbeavers3693 3 жыл бұрын

That would be purging the nitrous. Getting any air out of the system

@PhilD54 5 жыл бұрын

Dope truck. And ballsE lol

@user-eu4xg5tj4e 5 жыл бұрын

Fake! 6 sec/100.

@1torqued6point0 5 жыл бұрын

It never gets to 100 🤔

@Josh-tx3yi 3 жыл бұрын

@@taekwoncrawfish9418 damn I know I’m late but why do rude

@coreymohn05 3 жыл бұрын

@@Josh-tx3yi I know right they're just mad because they haven't seen or driven anything with real power

@magnacartasamadams8189 5 жыл бұрын

They're awesome trucks I like it because not everybody has them i love the underdog specially when you blow the doors off of somebody I just had a challenger for Dinner the other night

@1torqued6point0 5 жыл бұрын

That's about the fairest race with a car since they weigh almost the same lol. Keep racing it and having fun.

Ең жақсы KZbin

Пікірлер