Great idea.

When I tap on android it shows me some weird android log in exchange… no manu loaded, nothing

Mine stopped working as soon as I plugged it in; I had the correct voltage charger but it still blew the same F1 fuse. I'm going to solder mine but I don't think it's the motor, it's likely trying to plug it in; mine immediately blew. Oh and, if you have a hard time getting it apart, there are 4 screws under the rubber feet. Took me awhile to figure that out.

You saved the day! Thank you!

Absolutely fantastic! Got my key working. Thank you

👍

2007 W204 C280 you are a Godsend. The metal hook pulled back with almost zero effort, crazy how simple it is…

Thanks thats simolier then the t4 instructions i read on a forum. The t5 im looking at the clocks arent working sich as the speedometer, temp and fuel. Any idea on how to fix it? Is it a replacement cable or would it be a cluster soldering job?

Hi, please tell me that Yours was starting for one second and turn off, or had no reaction after pressing power button?

Great little video that solved my problem. Thank you. Had the notchy steering at the weekend on my 2016 Hyundai Tucson 1.7 diesel, which appears to be identical to the Kia. Was worse on the M1 - 30 miles of 50mph speed restriction. Strange sensation, of correcting and over correcting when in the straight ahead position. Done the re grease this morning and steering a lot lighter and precise at all speeds. The only observation I would add is that the under tray you need to remove is the smaller one towards the rear of the car. I removed the large front tray which isn't necessary and doesn't give access to the area needed. Having said that, it does say this in the description above which I missed. I used a general purpose, high melting point grease, working it into the worm gear and the teeth of the gear that is driven by the worm. I'll make a check of this every time I service the car, which I do myself.

no way trying this out tommrow

Did you have to cut the fabric? I can’t find a way to access the neck

HI do you have a picture the location on the gearbox, as I have a smart 453 and I would like to know , plus was it easy to remove or do you have to tare down the whole gearbox to get to them?

Your the man 😅 thank you

Hello

WARNING!!!!!!!!!!! I bought ICARSOFT CR MAX for my 2023 Porsche 911 targa 4gts and is not supported!!!! reached out to ICARSOFT and they said to do the latest update and it still says not supported. I did get some nice lady that said she could help but no response when I tried to reach her again.Super bummed after watching multiple videos of yours I thought this was a good product. Any advice?

I had exactly this problem with my e350cdi and now it is solved. Thanks 1000x for this useful video.😊

Thank you so much. Straight to the point. I didn't even remove the cover. One click my handbrake is working.

Thanks so much. I tried this today... It made a huge difference. The shifting has also improved drastically. Much appreciated

I want to ask, I'm from Indonesia, I have a VW T5 TDI2.5 with the engine code AXE, what I want to ask is what is the difference between the AXE and AXD engine codes, physically or what? Thank you in advance

Does this work on a 23 plate mhev .and also how did you discover this "trick"????😮

That tune 🔥

I've just had this issue. Can you say what the problem with the car not detecting the key was. My 2014 C220 just needed a software update care of my local Merc specialist.

You sir.....are a genius! Fixed my handbrake!

Can you send me a link to the video of uou putting cam back together and timing. Mines in bits and a bit worried about doing it right. Thanks

"once you put into legacy mode, they're disabled"... (switch and temp-sensor) On all Wall Connectors I have encountered, the switch to open the chargeport works in both settings. They have all been Gen 2 to be fair. The problem I see most often is the purple Pilot-signal wire losing connection near the plug/handle. Often intermittently, and bending the cable near the handle will connect/disconnect when using a multimeter in audible continuity-mode. This problem renders the entire Wall Connector defective and unusable! Such a small broken wire inside! And the handle is impossible to open, and thus can't be repaired...🙄

Hi mate, well done on fixing it. H = Heater, N = NTC (thermocouple). I've done a few of these, and quite a few other Milwaukee tools too! I can certainly give you a shout out on my channel if you like. Best wishes. Mick.

Hi,can you please confirm is this still the case as I’ve done this and Mercedes have sent me link to buy the certificate now. Any help would be appreciated.

How do you know if a heating element is no good? I have a milwaukee iron as well but the fuse is bad for sure; my issue is that when i connect the wires directly without the thermal fuse the heating element gets hot BUT glows orange which i think is strange but then again i never saw the heating element itself nor did i ever see it itself w|o a thermal fuse attached either. My concern is that if i replace the fuse and that element gets to glowing again then i’m just going to blow another fuse. OR is it the thermal fuse that regulates the heat therefore not causing the element to glow orange. OR lol, the heating element is just bad

I tried this on my 03 VW beetle & now I can't get the left side out & the stereos still in 🤦🏿

Great video, what is the correct quantity if filling from empty, is it 1 litre?

Mine WC need help, grenn lights fixed but d´ont charge; when I connet into de car, appear blinks dark blue lights, and them car lights off, and WC lights green but dónt charge. any solutions??

I was hoping this would work but no. It still doesn’t stay on. 😢

Does this fix cover the flashing EA3 led on board as your video does not mention it..thx

1:15 Does the large capacitor on LEFT have a dent in the case? Maybe just reflections.

For service it doesn't include Audi and vw seat skoda ..try to do abs bleed on audi and its not there

I did most of what you show here, but I didn't wait or made sure all the liquid was dry before putting it back together and turning it on. Now my TM C3500 shuts off a few seconds after turning it on. No error code. I tried everything and it keeps doing the same at the same exact moment. Ouch! Any clues on what to do to? Thanks!! 🙏

Thank you 🙏 Just solved my issue 😅

I have a kia and mine vibrates in idle for no reason, brought it to the shop and they said its normal. My fucking ass vibrates while I sit in that car. Any ideas?

Ive spent all day researching how to change the gear oil in my Hyundai Tucson 17 Diesel DCT 7 Speed gearbox. My driveway is on quite an incline and for some time ive suffered with the car juddering while pulling away in first gear. Happens everytime. Stumbled across this video, tried it, judder gone! Hopefully for good. Time will tell but instant fix for me. I left it 25 seconds for anyone interested. At 15 seconds, there way a noticeable drop in RPM before it recovered. Probably going to change the gearbox oil anyway as a preventative measure. Many thanks!

These foot operated handbrakes are crap, at least it’s easy fix, have to do mine at least once every 6 months!

Bought this device to replace my small icarsoft 950 (the one for italian cars) when I bought another italian cars, a maserati (because 950 doesn't support the brand). It works with the quattroporte 2009 just fine (it was just to read all data and clear small things like driving off with P brake engaged, and similar minor things, but it is good to have a proper device for each car you own just in case..). I was in a small car meeting last weekend where a guy arrived with a renault fluance and he told uis he have a check engine ligth but the official renault (local) service can't pinpoint the real cause, their computer just detected that there is something wrong with one of the sensors of the exhaust system. (which doesn't help much). I had the tool in my boot so connected and tadaaa, there was the 2 absolutely specific error code with proper description that the downstream o2 sensor voltage is out of bounds. This device is a GEM. Tons of updates came for almost each brand since I bought and it just a click to download and install all of them. (the 950 update was a pita, connecting to pc, download softwares, set com ports for usb and so on.) Best ever tool I ever bought to help my diy car maintanences/services.

Update on the ulez Bradford’s rip off I managed to get the log book updated by dvla to euro six but it takes a while to update the ulez systems and they only go back a month in compensation for the ulez. So don’t pay a penny guys get the pcn’s and then send supporting documentation it gets cancelled in the end

Brilliant straight forward explanation 👍

mine did not show any red light / reset button does not thing. any help ?

Blade thickness matters, thanks

What was the cause. I have one that goes into red lights but it's very intermitant. Is this the same fault.

is it posibble to update the android version of icarsoft cr max bt if so how help

Thank you, I was able to fix mine today. W204….. It was really fun to do 😊

brilliant :) I managed with one blade because that's what I had on hand. I put it in on the right, pulled the hole for the cassette and repeated the action on the right. Thank you