8 ай бұрын
9 ай бұрын
9 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
Пікірлер
@therealpipert Күн бұрын
Thank you for all of your info. I will be trying to fix mine when I go home last night. I only had it for two nights and everything was going fine but now one of the jobs is stuck in the printer manager, so it keeps printing just that job I am trying to print something else, but I will try thank you for everything.
@tasha6713 7 күн бұрын
THANK YOU THIS WAS SO HELPFUL!!! There really aren't any videos like this to help so THANK YOU AGAIN!!
@myliechism6460 13 күн бұрын
These are adorable!!!
@sarahscreativeboutiquellc 13 күн бұрын
@myliechism6460 Thank you!😊
@myliechism6460 13 күн бұрын
I love these!!
@Adrian-jk6zv 19 күн бұрын
Im having trouble finding my printer on my computer
@Meilas-v6c 21 күн бұрын
doesn't print large enough prints for me
@alexmoreno5894 21 күн бұрын
Hello what’s the largest does it print thanks
@sarahscreativeboutiquellc 20 күн бұрын
@@alexmoreno5894 It is 13" for the width and the film is on a roll so however tall you need the print it can do it.
@slyskitzo 22 күн бұрын
Anybody got any advice on troubleshooting a l1800 pro colored dtf printer? Whenever I turn the front power button on it makes this loud screech for 2 seconds and then the 2 middle buttons on the front start flashing red . I found out I had a broken ink pad and just replaced that and I greased up the rail that my nozzles, ink cartridges and print head run along when printing. If anyone can help or put me into the right direction I would be extremely grateful
@sarahscreativeboutiquellc 20 күн бұрын
Are you still having problems with it flashing the lights? You may need to turn the machine off and then unplug it from your outlet. Then replug it in and turn it on and it may reset the machine and cause the flashing to stop.
@slyskitzo 20 күн бұрын
@@sarahscreativeboutiquellc I did excatly as you said and did the in pad reset option that's one the USB drive, clicked initialized and still did not work
@richardpayne96 25 күн бұрын
How did you add the pint color line at the top to stop the small lines on the image I can’t find the download
@sarahscreativeboutiquellc 20 күн бұрын
I looked up on Google "color bar print test" and saved "the print guide: the color bar" image. I cut it off every print after it comes out, but I just use it to avoid lines.
@TheRealBrasky 26 күн бұрын
This is incredibly helpful, thank you for the upload.
@pattiwalbridge9008 27 күн бұрын
I have the l1800 13 inch. My question is once you get the two red light blinking at the same time while it is printing, is there a way to start it again or to you start over?
@sarahscreativeboutiquellc 20 күн бұрын
I usually end up having to turn my machine off and then I close out of the program on the computer. Once I turn the machine back on and reopen the program it usually solves the problem and I start over with printing the image.
@TheQuin Ай бұрын
It won’t let me print. It states it’s Idle. I’m at a lost
@sarahscreativeboutiquellc 27 күн бұрын
@@TheQuin Possibly try turning it off for a few minutes and then turn it back on. Also, close out of the computer program and reopen it. Sometimes there's a glitch in the connection.
@ashleywhite6068 8 күн бұрын
I’m having this same problem and don’t know what to do anybody???
@TabithaRJohnson Ай бұрын
May I ask when and where you purchased yours from?
@sarahscreativeboutiquellc 27 күн бұрын
@@TabithaRJohnson I bought my printer in September 2023 from the brand Procolored. This is the link for it: www.procolored.com/products/13-single-head-a3-dtf-printer-direct-to-film-printer-roller-version-l1800-oven?ref=sarahdavis
@TabithaRJohnson Ай бұрын
Noticed you had ink underneath the printer lid. I read the reason why that’s happening somewhere and can’t recall the fix. If it’s the same issue I read about it. If you find out about it. Can you please reply to this and let me know. My printer arrives tomorrow!
@sarahscreativeboutiquellc 27 күн бұрын
@@TabithaRJohnson I have seen where sometimes you have to change out and get a new waste ink pad because that can be one cause for it shooting the ink everywhere.
@aprilspiwak5761 Ай бұрын
Have you had issues with it jerking during the print causing a shadow effect
@sarahscreativeboutiquellc 27 күн бұрын
@@aprilspiwak5761 Yes! Sometimes I've had to refeed the film into the machine and it can help with that or turn the machine off for a minute and turn it back on.
@erinm7441 Ай бұрын
Have you ever had red blinking lights on the ink and paper? And a 2H CR load position error? I feel like I've tried everything including resetting the ink pad. I have an Eramart A3 DTF.
@sarahscreativeboutiquellc Ай бұрын
I'm not familiar with the particular machine you have, however, I have recently had both blinking lights occur and I had to reinstall the program on my computer and that seemed to resolve the issue for me personally. I'm not sure how to resolve the load position error other than to try and reload your film and see if that helps.
@heloise.n Ай бұрын
Hello ! Can you tell me what cleaning product you use? Is it the nozzle protection fluid? Thank you for this informative video, it helped me a lot.
@sarahscreativeboutiquellc Ай бұрын
Yes, I use a nozzle protection fluid. This is the link to the one I use: www.procolored.com/products/procolored-nozzle-protection-liquid?ref=sarahdavis
@sarahscreativeboutiquellc 20 күн бұрын
I use the nozzle protection fluid from Procolored! Here's the link for it: www.procolored.com/products/procolored-nozzle-protection-liquid?ref=sarahdavis
@SusieReyes-w9g Ай бұрын
hello im having color issues where it almost looks like an ombre print instead of a solid color can you help with that
@sarahscreativeboutiquellc Ай бұрын
You may need to clean the nozzle heads and make sure they aren't clogged, and it may resolve the ombre effect.
@bonnybailey2293 Ай бұрын
Troubleshooting small thin lines in the white when it prints
@sarahscreativeboutiquellc Ай бұрын
You will need to clean the nozzle heads, and it will remove the thin lines in the white when it prints.
@cathydonelson9143 Ай бұрын
I HAVE THE 2 light flashing alternating and i have done all that you said but my carrier will not move for me to clean under it. Any ideas?
@sarahscreativeboutiquellc Ай бұрын
I had to reinstall the printer program in order to get my machine to stop flashing the lights.
@charissaholmes1487 2 ай бұрын
Thank you so much for all the info. I currently bought the dsv l1800 version printer and have the paper and ink light flashing and can’t get rid of them. I bought off an individual and I didn’t get the white flash drive that you get when purchased. Do you know where I could download or get that for this printer?
@sarahscreativeboutiquellc Ай бұрын
Hi! You may need to reach out to the individual you bought the machine from and see if they still have the flash drive or reach out to the company they bought it from and see if they will send you one.
@josejose-pv7eu 2 ай бұрын
I'm glad to see your videos, it's very informative. I'm still weighing things like which dtf printer is better like procolored or prestige r1. those are so far the 2 printers that I know. hope you can enlighten me Sarah. thanks.
@sarahscreativeboutiquellc Ай бұрын
I don't know much about the prestige r1, but I'm very impressed by my Procolored machine and highly recommend it. They have Black Friday sales running this month to check out that would give you a discount off the machine you're looking at. This link is where all the sales are at: www.procolored.com/pages/procolored-black-friday-2024?ref=sarahdavis
@MTaropatchkeikis 2 ай бұрын
MAHALO for your info. It was very helpful compared to others I've watched. Great explanation on everything I needed!!! 2 thumbs up..❤
@sarahscreativeboutiquellc 2 ай бұрын
Thank you, I'm glad it was helpful!
@muddasarshah5513 2 ай бұрын
Pakistani rupees price
@muddasarshah5513 2 ай бұрын
Great 👍👍👍
@kingboss2611 2 ай бұрын
I'm currently having an issue with the blinking lights but when I went to install the resetter it was completely missing. My computer was already set to bypass the security. It just wasn't there. DO you know if there is a way for me to install it without the program being on the flash drive? I really appreciate your honesty and detailed explanation of what you did to help with maintenance.
@sarahscreativeboutiquellc 2 ай бұрын
Unfortunately, I'm not sure how to install it if it's missing from the program. You will need to contact the company you ordered the machine from and see if they can help you with that.
@tinamatus6599 2 ай бұрын
I got my machine hooked up and I did have some issues, but I watched your video again and I think it's fixed. I do have a question. Does the machine turn off by itself? I left it on overnight and came back to check it and all the lights were off and I couldn't get it to turn back on. I had to turn the power switch off and then immediately back on. In your video it states not to turn it off. How do I keep it on? Thank you!
@sarahscreativeboutiquellc 2 ай бұрын
I haven't ever had the machine turn itself off on its own. If the power went out at your home during the night, that could be a possibility. I'm not quite sure what else would be causing that issue.
@thecraftypuertorican 2 ай бұрын
This is an excellent detailed video. I've been on the fence about getting the DTF machine because of the maintenance, it's not complicated but I don't like the fact that it is an everyday maintenance. This maintenance applies to all DTF machine. I really will like to have one but I travel at least 4 x a years. Hopefully someday someone will come up with a better option of a maintenance free dtf machine. In the meantime I will continue outsourcing my transfers . Thank you so much for sharing thus information 😊.
@tinamatus6599 2 ай бұрын
I just got mine, but they ship the ink and roll separate. Do you recommend a specific brand of ink, or do I just stay with Procolored? I hope I don't have any issues, but knowing that I can come to your page to troubleshoot is awesome! Thank you for making this video.
@sarahscreativeboutiquellc 2 ай бұрын
I haven't had any issues with the Procolored ink. I use a more cost friendly ink though through Amazon. This is the link for the ink I use: amzn.to/3Yo4e95
@CVJComputers 2 ай бұрын
Didnt use our printer one day we were out and the white leaked all through the bottom tray and down to the floor. Anyone have rhis issue? Its the 3rd time. Its like it pushes so much white out that it rips the plastic in small areas on the damper.
@sarahscreativeboutiquellc 2 ай бұрын
I personally haven't had this issue. Maybe check your dampers and make sure they are pushed completely down on the nozzles and that they are secure. Also, make sure nothing is damaged on the damper itself.
@KimberlyGrout 2 ай бұрын
My white ink is watery do you happen to have a fix for that?
@sarahscreativeboutiquellc 2 ай бұрын
You will need to stir or shake the white ink bottle. The white ink over times separates and turns a watery color. This is why it needs to be shaken or stirred every day.
@nathanfreitas6659 2 ай бұрын
I have an issue with my procolored printer it won't print. I send in the printing queue and it acts as if it never recieved it. It wont't even clean which is wierd becasue yesteday I was able to print stuff and suddenly today I can't do anything.
@sarahscreativeboutiquellc 2 ай бұрын
You may have to turn your machine off and then back on. Also, close out of the program and reopen it sometimes that solves the problem as well.
@omaraywillis6991 2 ай бұрын
Hello, Sarah. Do you know how to put the program (Register Me) back on the white USB if your firewall deletes it?
@sarahscreativeboutiquellc 2 ай бұрын
I'm not sure how you put the program back on. You may have to contact the company you purchased your printer from, and they can help you get it back onto your USB.
@davewilkos26 2 ай бұрын
Has anyone has the issue when took the image out of oven theres a bunch of dots that kind of look see through the image. Had that just lately these dots are not there after printing only when taken out the oven. Thanks
@sarahscreativeboutiquellc 2 ай бұрын
It can possibly mean there is moisture in your oven. If you see any moisture in the hood of your oven, wipe it out and it can possibly make those dots go away. This is what I've had to do before and it fixed the problem.
@davewilkos26 2 ай бұрын
@@sarahscreativeboutiquellcThankyou will check tomorrow when use it. Thankyou for the reply
@davewilkos26 2 ай бұрын
Also I use the transfer roll and its set to one side of the bar so when the film goes through the printer it on the right side more than the left. Was told that how needs to be but wasting alot of transfers due to image being printed over the edge and keep having the images printing over the transfer roll onto the metal platform.
@sarahscreativeboutiquellc 2 ай бұрын
Originally that is the same thing that I was told and I continued to have the same issue you're describing. I changed mine and the film is on the left side more than the right side and I no longer have any issues from mine. It prints onto the transfer roll every time.
@davewilkos26 2 ай бұрын
@@sarahscreativeboutiquellc will try that thanks
@davewilkos26 2 ай бұрын
Hi, i have a oven issue well think i do. When i have printed my image and powdered it put it in oven at default settings. Once i get it out its still powdery. My settings are 105c 150 seconds. Any help appreciated. Thanks
@sarahscreativeboutiquellc 2 ай бұрын
You will need to play around with your heat settings and the amount of time the print is in the oven. I have my oven set to 150 for the temperature and then originally it was at 200 seconds. Each film will vary on how long it needs to be in there. The film I currently use I had to up the number of seconds to 400 to get the image completely cured.
@georgevision 2 ай бұрын
Wow such a great video. Thank you so much.
@sarahscreativeboutiquellc 2 ай бұрын
Glad you enjoyed it!
@ZascreationCo 3 ай бұрын
Thank you for being more transparent then other reviewers which are usually paid reviewers this printer is the worst buyer beware daily maintenance is needed there is allot of other issues beside the white ink Printhead issues and caping station and the the company selling defective replacement with no warranty Don’t buy this please do your research I will be doing a series of the waste this printer truly is
@sarahscreativeboutiquellc 2 ай бұрын
There is a lot of maintenance that does go into this machine, but I really like the dtf printer and think it was a great investment for my business. Every person is different though and has to out way what they are willing to invest their money and time into.
@amymondragon5523 3 ай бұрын
This is a very helpful video, I appreciate how you detailed your information and also visually showed us what you were doing and it wasn't soo fast that it was hard to keep up like some of the videos out there. The only other comment I have is that my oven was already preset to Celsius temperature which I don't remember off the top of my head what that temp is, and it is set to cure for 90 seconds, My ink bottles are a little different on my printer, I think I may have a newer machine than what you have and that could be why I have presets. Awesome video!
@sarahscreativeboutiquellc 2 ай бұрын
Thank you! I'm glad the video was helpful!
@desireeball1268 3 ай бұрын
I need help I can't get mine to print any images
@sarahscreativeboutiquellc 2 ай бұрын
Are you having any flashing lights on your machine when you're trying to print? Or are you having a problem in the program on your computer not wanting to display the print option?
@bama2win 3 ай бұрын
Hey Sarah! Thanks for the informative video. I am scouring the internet for a fix to my problem. I’m also uploading pics and chatting with Procolored during the wee hours lol. I have two problems. The first is reoccurring but goes away after a few days: It stops printing mid print! I have to turn it off and restart then have to restart the print. I’m wasting ink and film. The other problem is a ghosting or shadowing on prints. My first print is usually fine but subsequent prints have a ghosted image outline. This is usually on the second half of the print. I have tried changing the print direction and the ink from 70 to 85. Neither of these has helped me produce a fully clear image. Any suggestions? Do you mind sharing which film you use? I have just bought film for the first time and did not go with the same brand that came with the printer. I have the same one you have.
@sarahscreativeboutiquellc 2 ай бұрын
Hi! There can be a number of problems that will cause your printer to stop mid print. It could be a connection issue between your computer and your printer or it's a problem with the printer itself. The ghosting problem can be caused by either your print head or a clogged nozzle. I would start by cleaning your print head and waste ink pad first and then seeing if this fixes the issue. If it doesn't you will need to flush your nozzle heads out with cleaning solution. The film I currently use I purchased from Amazon. Here's the link to the one I use: amzn.to/3XFQDIF
@lisawise4555 2 ай бұрын
Hello ladies, I have the same machine and I have had a number of problems thru out my 3 1/2 years of this machine, the worst was replacing my motherboard but the help desk got me thru it their videos were a blessing, I had to walk away several times but I did it , I really need to learn how to empty my waste ink pad , the company helped me multiple times, now my problem today is that darn white ink clogging The company told me that I had to turn on my machine every day, they never said to keep it running, I really need to make a video to help others and others help me , it can be a headache
@MagaliMontalvo-s9u 3 ай бұрын
How do you add the color test strip to the top?
@sarahscreativeboutiquellc 3 ай бұрын
@@MagaliMontalvo-s9u You download the color strip to your computer and then upload it into the program the same way you upload an image.
@l900ket8 9 күн бұрын
Could you send me the photo you use to upload to the top please. Is there no way of saving it so you don’t have to upload it every time?
@mikewilliamson5803 3 ай бұрын
Great video. My issue rn is when you press RIP to print it says print failure. (And won’t print) Have you ever had this issue??. I have the same machine as you :). Thanks!
@sarahscreativeboutiquellc 3 ай бұрын
Occasionally, I've had this issue and for me it has been because my image wasn't within the printing area. Sometimes you have to slightly move the image around and then it will let you print.
@douglaskoenen8757 3 ай бұрын
An amazing video. This video has so many common problems I have had as well! Thank you!
@lindapotras7252 3 ай бұрын
I just replaced my print head and capping station on my R1390 now it's put back together and doesn't work. And 2 red flashing lights. Linda
@sarahscreativeboutiquellc 3 ай бұрын
@@lindapotras7252 I'm not sure exactly why it wouldn't be working! Does your computer say anything about what the error is?
@myliechism6460 3 ай бұрын
❤
@myliechism6460 3 ай бұрын
Beautiful how much are those book marks
@sarahscreativeboutiquellc 3 ай бұрын
Thank you! They are $4
@myliechism6460 3 ай бұрын
@@sarahscreativeboutiquellc okay thank you
@Wanda-Designs-DIY 3 ай бұрын
Everything is beautiful. Just a heads up: always put butcher paper when doing sublimation. You can mess up the mug press if it bleeds through. The inc won’t come off if it bleeds on to the mug press🤷🏻♀️.
@owlbecrafty 4 ай бұрын
Question, do you use Procolored inks? Did you ever use the Procolored DTF powder, if so, any reason why you don’t use it anymore?
@sarahscreativeboutiquellc 4 ай бұрын
@@owlbecrafty I used the Procolored inks at first, they worked great. I currently use a different one on Amazon. I haven't ever used the procolored dtf powder, I've just used one I purchased from Amazon.
@owlbecrafty 4 ай бұрын
@@sarahscreativeboutiquellc thank you for responding. I just recently purchased the Procolored bundle that comes with inks and powder, was just curious if that had been the case for you and if there was a reason why you stopped using the Procolored powder. Any reason why you switched up the inks, was it cost?
@sarahscreativeboutiquellc 4 ай бұрын
@@owlbecrafty Yes, at the moment cost was a key factor for me for switching. I never had any issues with the ink, I just needed a more affordable option for the time being.
@owlbecrafty 4 ай бұрын
@@sarahscreativeboutiquellc ok, understood! Good to hear it that the ink wasn’t an issue 😉
@owlbecrafty 4 ай бұрын
Such an informative video….thank you! I just purchase an L1800, haven’t received it yet, but I was trying to find any and all info that will be helpful for when I get it and happen to run into issues. Please make more videos of any other issues you might come across and what you did to fix it, you explain everything so well. I was starting to get nervous about all the negative comments regarding this printer and how much people complain about the maintenance. One of my questions was whether it should stay on all the time and you’ve answered that. I’m excited but nervous about the whole set up.
@sarahscreativeboutiquellc 4 ай бұрын
@@owlbecrafty The maintenance seems scary at first, but once you get it down it's no big deal!
@Qwaylude 4 ай бұрын
I'm deep into DTF the issue with that line at the end of your print if your paper /film is to short or if your image is close to the edge it will smear u have to have at least an extra 1inch and a half or 2 inches so it stays in rollers and won't shift. I figured that out after multiple 13x19 prints success till the end I wasn't leaving enough the film wasn't stabled in rollers. Today I'm taking print head out of mine and cleaning it in ultrasonic cleaner. Then fun of dtf
@MagicEspinoza 4 ай бұрын
Thank you so much for sharing this information! This has been so helpful
@Conamoraccessories1 4 ай бұрын
Hi i have a question, my images in my PRO RIP are perfect not Blurry or anything, but when they are printed they look pixel i try everything I don’t know what to do 😢 your images look so perfect can you help please
@sarahscreativeboutiquellc 4 ай бұрын
I haven't had that issue so I'm not 100% sure what could be causing that. Are you using a png for your images?