The fact you can’t customize any channel presets is such a fail with this receiver. I want to listen to music and utilize my centre channel in “stereo” for example. This receiver has next to no customization.
@skippyturtle1Күн бұрын
I really had high hopes that we would hear something or be able to purchase the new pre-pros, but let down again even after we were told that we would be updated if anything changed. "we are still working towards a July release but will update on any changes that may occur!"
@thomasvt2 күн бұрын
Is it possible to use the same 1 rca input signal for 2 amp channels? Want to have 2 pair of surround speakers (2 SL & 2 SR) from 1 pair of rca input. Is there any setting on the amplifier which can do that. Or can it be done with Y splitter without any impact on sound output
@TheNLHAZE6 күн бұрын
Big question I have a Onkyo rz50 it is 120 watts to channels driven I understand the basic fundamentals however I do have a emotiva Bass X2 but if my Onkyo only puts out 120 watts even with my pre-outs connected to the amplifier and then the amplifier is connected to my SVS Tower speakers that I want them to get 200 Watts how can this be accomplished the basics of what I understand is you only get in or should I say you only get out what you put in.. please please help me understand and fix this situation to where I can get the most out of my amplification and setup thanks so much for your time in advance..
@EmotivaAudioCorp6 күн бұрын
How many total channels are you running?
@TheNLHAZE6 күн бұрын
@@EmotivaAudioCorp the point to my question is if is the speaker can handle 200 Watts I want to get 200 W to those speakers each however the bass X2 only delivers 160 w so without saying my Onkyo only puts out 120 watts 2 channels driven so no matter what amplifier I hooked to my pre-out whatever your output comes out to be whatever you put in to the amplifier you get in what you put out that's what I can't figure out how can I get 200 watts to that speaker if the amp can only 160 Arlette say I get a bigger amp they can actually give out 400 watts a channel still in the end I am only dealing with a Onkyo that can only produce 120 watts per Channel so if I hook it up via pre out to an amplifier that may can deliver 400 watts per Channel if you're only pumping in 120 how can I achieve any more power thanks in advance
@EmotivaAudioCorp6 күн бұрын
Understood. If you connect an external amplifier to the preouts of your Onkyo, it will bypass the internal amplifier. So if you connect an 400 watt amplifier to the preouts, you will get 400 watts. The receiver will just send the signal through the outputs and the external amplifier will take care of the power to the speakers.
@TheNLHAZE6 күн бұрын
@@EmotivaAudioCorp No sir not in this case. Now Onkyo has came out with a new RZ 70 the rz50 is about 2 years old now most of your higher-end receivers will actually cut off the internal amplifiers when you connect your pre-outs you have that option to do so however the terminals on the back of my receiver have sound as well as my pre-outs as well so I actually have two front left and two front right speakers playing when is ran through at emotiva Bass X2 and the other one or should I say the other two are hooked up to the Onkyo all four speakers play at the same time. I greatly do appreciate You taking the time to respond back To me However You do understand what I'm saying If the AV pre-outs put out only 100 Watts that's what the amplifier will process goes back to the same scenario of what I was saying you get in what you put out just like if you put in a trashy sound then the amplifier is going to produce and trashy sound I understand that concept I really do but where I get lost at is getting up to the wattage that I need that's why you have gain control on some amplifiers I do thank you so much for responding back..
@TheNLHAZE6 күн бұрын
If you do have any more time for any more explanations I would greatly appreciate speaking to you on a more in-depth level thank you so much for your time as I do seck for more power !!
@user-bc5pv3ot9c8 күн бұрын
thank you!
@EmotivaAudioCorp8 күн бұрын
You're welcome!
@Ranknvlogs11 күн бұрын
How to connect the subwoofer? Any suggestions please
@EmotivaAudioCorp10 күн бұрын
Your subwoofer usually connects directly to your receiver or processor if it is a powered subwoofer. If it is a passive subwoofer, the same concept applies with this video, the amplifier you have to power your sub will connect back to the subwoofer output on your receiver or processor.
@22thehotdude11 күн бұрын
Any update? I have 3 Emotiva amps and now I’m ready to get an emotiva processor.
@EmotivaAudioCorp8 күн бұрын
We will have more news soon.
@Jagman199612 күн бұрын
Will the DRS-1 stream Tidal tracks in Dolby Atmos via the HDMI output?
@RDR2Online13 күн бұрын
Thanks for sharing only wish you made HD quality vid though ❣️😊
@GopinathJambulingam14 күн бұрын
I have a Yamaha R-N800A Stereo Network Receiver paired with Wharfedale Diamond 9.5 speakers. I can only enjoy the music at above 75% of the volume. Can I use it with Emotiva XPA 2 Gen3. What precautions should I make if I can go ahead with this addition?
@EmotivaAudioCorp14 күн бұрын
Yes you can connect the XPA2 to the preouts of your Yamaha with no issues. Just plug and play!
@hintoninstruments236916 күн бұрын
This explanation is inaccurate and misleading. This guy does not know what balanced really means.
@skippyturtle116 күн бұрын
we are in July, but have not seen any updates on these new processors.
@hdz7718 күн бұрын
Why you don't make surround Speakers anymore ???
@EmotivaAudioCorp16 күн бұрын
We do with our XA2s. The first few batches sold out almost immediately which was unexpected to us. We are currently rushing to get more produced and available for sale.
@KeithCopeland77819 күн бұрын
WOW!!!! This is a well-designed well-engineered and well-constructed receiver!!! $1599!!!!!! This is now at the top of my list to replace my legacy Yamaha RX-V571 receiver!!! Thank you for an excellent video!!!
@EmotivaAudioCorp16 күн бұрын
Glad you like it!
@1970borntorun21 күн бұрын
It's very difficult to have faith in Emotiva, and their vision for their future. First of all, they claim to be - '"High End gear, priced for the blue collar guy!" ( I'm paraphrasing the Emotiva corporate mission here for the sake of discussion ) when they haven't for years offered a dedicated 2-channel pre-amp for pure Audiophiles. Secondly, I see TONS of used Emotiva gear on the internet which makes one suspect as to the sonic merit of their gear in the first place. Thirdly, why doesnt Emotiva send review samples to The Absolute Sound or Sterophile if they or so confident of the sonic attributes and value of the gear? Lastly, if Emotiva were doing that well as a Business, they wouldn't need to resort to all the price-slashing on their website. Emotiva reminds me of Enron. Everything "seems ok" on the surface. Just don't look too close...🤔
@kenanderson221623 күн бұрын
When will ever stop sending the bass into the floor? Some experts say elevate them. Especially on wood floor. Hope that helps someone out there. Its a good rabbit hole if nothing else. 👍
@bluelithium980828 күн бұрын
Too bad Emotiva dropped their self powered speakers. They were great.
@jorge1092828 күн бұрын
What's the expected price point for the DRS-1 Streamer?
@TherealDsizzle29 күн бұрын
I’ve never even seen RCA for the speaker wire
@good4soundАй бұрын
Brilliant
@dylanfws5431Ай бұрын
and a sub
@dylanfws5431Ай бұрын
u got my like
@ryj5284Ай бұрын
Hello, This msg is for Keith or your software eng. I've written in about this to your tech support, but never got a reply. I have the MC-700, there are a couple of things with the software that annoy me. I wondering if you could correct... please.. One I set the "TRIM" I want it to store and not change, unless I change it. I normally have it maxed to 10. I find it that, while playing music it comes alive. It would be nice once set, it won't change going from source to source. For me, it would be great, to just set all the sources to 10 on the TRIM adjustment. I don't think this would be difficult for you folks to do, having in house software eng. I know this unit is a little older. I'm happy with the sound and it's clarity. And I just can't afford an upgrade right now. Thank you.
@alexanderjamesl4868Ай бұрын
i understand that visually this is potentially more marketable with the shallower center profile, but I wish I could find c1+ on the market still. Wish there was an option to have cabinets with curves too to help with edge effects
@victorvalenzuela6949Ай бұрын
I’m new to the hobby. I have a Emotiva XPA 3 gen 2 amp I believe it’s at 8ohms and and my speakers are also 8 ohms. I’m looking to get new speakers that are 6 ohms and my center channel is 8 ohms. What would happen if I mix them with the XPA-3 Thank you
@ultimateone624Ай бұрын
Hope you guys fixed that popping sound on your processor's when your watching movies.
@subilkr623Ай бұрын
is it can 7.1.4 connect?
@jorge10928Ай бұрын
21:26... I'm a typical guy so I ordered two of the XC1 to try them out as bookshelves. Can't wait!
@truckguy9413Ай бұрын
Can someone explain channels driven to me for my scenario. I want to use an XPA6 to biamp my 3 main front, center and right speakers. They are 4ohm. How much power will they see running biamped vs normal. Can/Would you tell a difference at reference movie levels. As of now I just have a 5.1 but planning for a 5.1.4.
@robertburton295Ай бұрын
I love the emotiva products I just wish that the amplifiers didn't all have the same case
@pradeepreddy3744Ай бұрын
Please please have expansion module support right from the release to increase channel count to 20 at minimum. This will make Emotiva an option for people looking to buy Marantz AV10 & Anthem AVM90
@racerrick35Ай бұрын
I don’t see WiFi or even Ethernet here…please explain??
@user-sc6px4tl6kАй бұрын
Emotiva bassx mc1 ou rotel rsp1582?
@iamnothing85Ай бұрын
Will the 8k upgrade be applicable for current owners who already have RMC-1L? I have all of your system processor, amplifier, speakers and subwoofer. I guys produce very quality product. I like everything except the processor hdmi and slowness I love the sound though but bugs. Please send the current user an email when this is available so we can upgrade. Thanks.
@ultimateone624Ай бұрын
Just hope there adding dts pro. Because my wide channels don't really come alive after all that wiring its a no show.
@vince_xcv3306Ай бұрын
Merci je vais donc axheter 2 SVS PB 1000 Pro pour ma petire salle home cinéma de 12 mètres carrés 😃
@unknownkosmos1822Ай бұрын
Where to get from in Europe this dirac kit interface???
@unknownkosmos1822Ай бұрын
Stereo mode sound much better from rest modes, why? Stereo mode only play front speakers, how to keep front speakers sound so good in different modes?
@bigbardmusiqАй бұрын
I'm just here for information on the new versions of the processors. My RMC-1 needs wifi and bluetooth.
@BarleylegАй бұрын
Opening new Emotiva gear reminds me of unwrapping my most favoritest Christmas present ever.
@crimlarksSteveАй бұрын
Happy Birthday Damon! Love your videos - the new streamer looks really interesting...
@wolfmanjacksaidАй бұрын
I've had a Denon AVR in full preamp mode as my proceseor for a few years, been waiting for the new Emotiva processors to come out to bring my HT to the next level.
@betaomega04Ай бұрын
Bring back the XPR series!!!
@SteveB69Ай бұрын
Hi, there will be a new remote control and more modern interface? Thanks
@dodihartawanmatofanichanne3016Ай бұрын
Ok👍🎧
@user-ko8kx8vf1kАй бұрын
Give credit to Randy the cheap audio man!😊
@joeforsh0Ай бұрын
Don't forget to check your input channel! The issue for me was one speaker wouldn't play, even after reversing L and R and swapping out speaker wires. Then I tried a different input and the one speaker now plays. Must be the aux cable...
@spons19822 ай бұрын
why aren't there any youtube reviews of the XT2 or XT3?
@thinkIndependent20242 ай бұрын
I am A Fan of your Audiophile philosophy
@jlyt182 ай бұрын
can you use the height channels on top of the towers as reflectives?