Flooded it mate one pull full choke it made the cough pull trigger should go to half choke or move choke manually then pull again should fire then hit the trigger

I heard it fire first pull, its now flooded

What camp or forest is this?\

And that driver is ok with driving over that shit after it’s cleaned and he’s hoping it really was all cleaned…

Why would they do that

My saw is great but i usually prime it 5 to 7 times

I haul float glass recently broke a few lights on a delievery and we saved all but two lights and when they crashed onto my trailer it was an awful mess that took hours to clean up.

You definitely didn't prime it

Mine is a beast same one

Bucket lister save!

Instructions said to hold the throttle lever and airlock together. While you are pulling the the string HOLD THE THROTTLE LEVER...

Looks like Little Girl's Point

what shoud that ❓❓❓❓

Echo 590 my friend

Thats not tempered glass its plate glass. There are still big chunks left. It shattered because of the weight and size. That size would never fit in a tempering oven. The color is called clear but its green. And starphire glass is really clear.

Would have been a good time to have a air horn

The chainsaw is flooded because you prim it to much or carbonator could be dirty.

Sand can be so dangerous 😳

Mosquitoes in the up get their winter coats in the fall and really start biting until they migrate to Wisconsin in January

Dude have you ever started a chainsaw one why you still get the freaking choke on you're flooding it two I have that chainsaw and I bought a 2018 and mine works freaking great the only thing I changed on it was a new chain cuz they wear out and you going shopping so many times and it gets used every winter for firewood yeah I'm guilty of buying a cheap ass chainsaw but I don't care I got my money's worth

I got mine yesterday and it started on 2 pulls and runs great.

My Dad was up there in the CCC,. He passed away 2013 at a 101. He showed Me He's camp, along time ago. It was west of Watersmeet North of US 2. Pomorey lake area? & Summit lake,. I remember taking logging roads to get there. I was very young, I wish I could tell You more. Dad showed Me were the main camp was & barracks. I wish I could help You out more. Happy hunting.good luck

Wrong size pendejos

I had the same damn problem bro

I remember those U.P. bugs..the black flies are the worst! What part of the UP do you hunt! Cheers new sub

The USA t shirt tucked into the straight leg denim tells me enough about this fellas opinion, if you need a users manual to start the saw then complain it’s junk when it won’t then it sounds like operator error

I'm 8n the UP as well. Have several old CCC camps around the area. Have not detected any of them yet. Did hit up an old fire tower location. Must have been quite the party spot after they decommissioned the fire tower. There were old beer cans EVERYWHERE. Some places they were over a foot deep. Almost impossible to detect because of all the old cans.

Clean up was a bitch I bet

I have the same saw for 3 years with no problem-you need to check for spark if the plug get wet with gas by over chocking it will never start if so take the plug out dry it good With paper towels, do not pull more than three time with chock out close and pull repeat.

Can I get that Styrofoam?

My Gawd here he comes! Stone Cold! Stone Cold! Stone Cold!!!

Jumbos! 130" x 204" Quite dangerous.

Maybe. You should hire a tree company because you know nothing about operating a power saw

I did block glass for 6 months....fuck that, I went back to coils....

Anyone else hear Ave's voice here??

Might be doing something dumb, but as I recall I always had the throttle at full whenever I tried to start it--no problems so far. Didn't notice him do that, though.

I didn't realize those coins could work their way down that far in just a few decades.

That swish sound is more satisfying coming from that instead of a basketball hoop

LOL 😂, after the first pull it was ready! As soon as you hear it pop off you shut choke and it would have started in 1-3 pulls! All saws,weed trimmers, leaf blowers any two stroke for that matter are that way. I hope you read some of these comments and get it started. Good luck 👍

How does the trucker drive away without getting glass shards in his trailers tires? Forward or backward is the same problem

It’s working fine it’s an operator error and I have one myself and it works fine

I made the mistake of pressing the primer 7 or 8 times and full choke after opening and assembling it and adding 25-1 mix. It wouldn't start,important to read the manual first. I'm used to other saws that require you do it that way. I took the plug out and cleaned it and it usually fires up first pull now. It is a cheaply made saw but has lots of power for the money.

I don't think it's the saw. It would have run when you pulled it the first pull it fired. Need to turn choke off. You flooded it.

Imagine being a white middle-aged male who should know how to start two-stroke lawn equipment, posting of video ranting about how bad a chainsaw is because you're incompetent when it comes to starting lawn equipment. Instead of making a video and posting it or sending it to the manufacturer asking okay what am I doing wrong here? You go off on a rant instead post it to KZbin and make yourself look like the fool that you are. Imagine being that guy.

i just got one.it started right up .and its a beast! you got a dud or you have no clue what your doing .

Probably just a bad plug or switch wire lose I can hear that it's not firing at all there is no ignition. Lesson u shouldn't buy something if ur not smarter that it

Why did they smash the glass?

I bought one had real good luck with mine thank you

Kiss that load "GOOD-BYE"!!!!!!!!!!!!!

When priming you need to pump the primer ball at least 5 times . Some saws 10 times . No wonder it's nat starting .