Пікірлер
@LTMillar 2 күн бұрын
I just finished watching your video on KZbin about these lasers. I just bought a used version with a M2Nano board. Do you have any suggestions on how to set up the software?
@LTMillar 2 күн бұрын
I just finished watching your video on KZbin about these lasers. I just bought a used version with a M2Nano board. Do you have any suggestions on how to set up the software?
@Frugleclock 3 күн бұрын
If the Ethernet port is out what else can I do?? I can’t figure this out :(
@mohamedkhalifa3463 7 күн бұрын
Wow Awesome
@astridmiller7938 7 күн бұрын
use liquid laminate no hassles ever
@DaPrintHouse 7 күн бұрын
used it for years especially old school frog juice., there are certain instances where its beneficial, but not the end all solution.
@astridmiller7938 7 күн бұрын
@@DaPrintHouse use spray on. no problems at all, for years
@astridmiller7938 7 күн бұрын
@@DaPrintHouse also newer laminates are improving too
@DaPrintHouse 7 күн бұрын
right for non contact surfaces, spray on no bueno for materials needed to be cleaned. but ye i have been using sprays for over 25 years
@astridmiller7938 7 күн бұрын
@@DaPrintHouse and hi from melbourne australia
@jerryskazma3782 7 күн бұрын
If you're not going to actually laminate it, then why put that in the title?
@DaPrintHouse 7 күн бұрын
sorry to disappoint ya, i get questions all the time, when people ask how i kinda jump right at it, the video wasn't about laminating tbh it was about using it in combination of print/lam/cut which i show. sorry i didn't meet your expectation of having a lesson of laminating. its more of an artform anyways lol. thx for watching
@PainRanch 7 күн бұрын
What the poster did was skip a useless part, addressing the point directly and I'm thankful he did it this way.
@jerryskazma3782 2 күн бұрын
@@DaPrintHouse Makes sense! Sorry for my initial rudeness.
@DaPrintHouse 2 күн бұрын
nah yur good. i get all kinds of messages so i try to answer best i can or show specifically, lamming is def something done in practice. i appreciate you watching my vids.
@jerryskazma3782 19 сағат бұрын
@@DaPrintHouse You bet! I'm looking to get into sticker making, and was specifically curious how the Roland BN-20 worked with laminating. But your video showed me enough, thanks again!
@sarahialrohani909 8 күн бұрын
What software do you use to print your labels? I want to print 2” rows labels on the epson6500
@talen888 10 күн бұрын
🙏🙏👌👌❤️
@costasgeorgiou5015 10 күн бұрын
I got flexi pro and I don't have that option for contour that way. 3:04
@DaPrintHouse 7 күн бұрын
what version flexi? should go back several versions
@MajdAhmad-c8h 13 күн бұрын
Hello, i have question, for Epson c6000 or c6500 economic ink cost? For Example label 6.5*20cm how much ink cost? Medium coverage
@MajdAhmad-c8h 13 күн бұрын
Hello, this printer economic ink cost?
@printco2617 14 күн бұрын
How do you change the clipping roll
@Levi-dp4by 14 күн бұрын
Great video! I run a small sticker business, mainly for hire and equipment companies. I currently outsource printing but do cutting at home. I’m debating between investing £6k in a new BN2-20A or going for a second-hand BN-20A for around £2.5k. Any advice on whether the newer model’s faster speed and features are worth the extra cost, or if the older model is still a solid choice for small-scale production at home? I’d still outsource larger orders How long do stickers need to dry? Thanks mate
@hailstorm9732 15 күн бұрын
How much did it wind up being?
@Rick43man 15 күн бұрын
5.99$
@Rick43man 15 күн бұрын
@@osu3167 the $5.99 was everyone 24.3 mil Robinhood users meaning 400k did it… this one is 2.2 mil gold users and if its same percentage of voting my guess would be around 60$ yesterday was able to find out 3 hours after under rewards tab then click on upper right hand corner with timer stopwatch icon
@Rick43man 15 күн бұрын
@@osu3167 my min guess is $12 and max is $200 so let’s see how 2025 starts off haha I like free money
@DaPrintHouse 15 күн бұрын
@@hailstorm9732 ye justvunder $6
@Rick43man 15 күн бұрын
@ $8.19
@kiki_e_1230 17 күн бұрын
We have the HP Latex 64 Cutter and we're having issues with it reading the barcode. In the Queue, it says cannot open port. Do you have any suggestions?
@reqless0ne 28 күн бұрын
Weird question, is that Roland color chart automatically printed in CMYK?
@stickerhoggz Ай бұрын
Mimaki has had several 24" printers of which i have owned one and was not impressed with them at all... I have now had my bn20 for heck 12 years on the same dampers, same print head, yes changed out the cap top and wipers, but it all boils down too when was the manufacturing switched to the cheap chinese products... Hate to say it, but this is when it all went downhill and it's when i seen all these printers have issues... And it not only pertains to the BN20, but all the roland printers in general.. Quote me if i am wrong, but i don't think so if you follow all this with minute integrity as i do... I have other roland printers since they have switched and let me tell ya the hell i have been through and others that i know have had one issue after another.... It's a shame that is has come to this from a company that a lot have come to rely on....
@miketheprintman Ай бұрын
Ken, you've always done a great job explaining not only how to run your equipment, but why you bought it and what their pros and cons are. I agree about the HP Latex. Great machine, even better for those who don't run their printers 24/7. I'm thinking about buying one of those Mutoh's, maybe next year. Looking forward to seeing that laser in action.
@DaPrintHouse Ай бұрын
@@miketheprintman ugh mutoh not mimaki I said the wrong one lol. Thx for the comments mike
@waldo2413 Ай бұрын
lol diddy joke made me laugh
@DaPrintHouse Ай бұрын
thats a watch the whole video test! u passed! loool good seeing you brothah!
@alfredoojeda7977 Ай бұрын
you llike it more than the workbee cnc?
@DaPrintHouse Ай бұрын
if that one has bearings or wheels in general for slides i would never....
@ckrampen22 Ай бұрын
What banner material and settings do you use? We have a hard time with head strikes with out 360
@DaPrintHouse Ай бұрын
i use any generic 13oz banner like hp or ultraflex i always use hp prime matte banner profile for them all, also i tape a pull sheet in front to hold down for startups to get past the heater. never have a head strike that way,
@karolsz09 Ай бұрын
Ktore urzadzenie jest lepsze ? Primera lx3000e czy epson c6500 Prosze o opinie i doradzenie
@DaPrintHouse Ай бұрын
6500c because of the ink system, that's the older one i believe
@karolsz09 Ай бұрын
Co lepsze ? Primera czy epson ?
@DaPrintHouse Ай бұрын
epson
@karolsz09 Ай бұрын
@@DaPrintHouse i wszystko jasne. Dzięki
@stickerhoggz Ай бұрын
Not gonna lie here... Last time i replaced that cap top was 3 years ago... Still prints like a charm. Same thing with wipers... However, my machine is back from when they still made these in japan... Now they outsource almost everything to china. Hence why so many problems with the BN20A and others that have come after that.
@DaPrintHouse Ай бұрын
Ye my machine is from 2013 probably why it has lasted! If u print regular the cap tops and tube's last because they don't sit stagnate as much. Having the ink pump through when it does its cleanings prolongs for sure
@stickerhoggz Ай бұрын
Yeah, i really want to see it in action. I told you these things have rave reviews... It will be my go to when i am ready.
@DaPrintHouse Ай бұрын
I'm already impressed with the functionality. Setting up in aspire using the onefinity webserver downloading programming from same computer witbout using usb's is a game changer how I did things. Using the wifi or ethernet is a must, itsba solid machine dry runs went great. Next need to get mdf and do some surfacing.
@stickerhoggz Ай бұрын
ROFL! Cool Magic happening there...
@DaPrintHouse Ай бұрын
Those my Spielberg skills right thur
@stickerhoggz Ай бұрын
What ya gonna do with your old one?
@DaPrintHouse Ай бұрын
That one is for my aluminum parts making exclusively
@billysmether6237 Ай бұрын
You need to stabilize your camera work. I was getting dizzzy. Why did you list "Controller Setup" and then did none? Sound is good. Thanks for video.
@DaPrintHouse Ай бұрын
hi i don't edit videos or have the time and really this was just saying i have it setup. i did mention in the video i wasn't going to do a setup video since there were plenty of really good ones on youtube. but sorry for the lack of stabilization, just my phone etc
@ckrampen22 Ай бұрын
Can’t wait to see it in action!
@EUCvibes Ай бұрын
Amazing, can’t wait to see what you create with that new beast right there
@gosigngo Ай бұрын
Fantastic job on that
@DaPrintHouse Ай бұрын
Game changer
@jaminfinlaw9842 Ай бұрын
Super helpful! Thank you!
@miketheprintman Ай бұрын
4 years is a pretty good life span for a print head. Thanks for sharing.
@TylerBerryDrifting Ай бұрын
I just bought one of these and am waiting for it to come in. I have an HP Latex 115 so I use 54” media. Will it fit through this laminator or do I have to use 51” material? 51” laminate is tougher to find and more expensive.
@trustgaming_shorts Ай бұрын
awsome job!
@yvonnefoo2510 Ай бұрын
Would you recommend this for sticker sheets? Maybe 15 stickers on a sheet with different shapes and sizes?
@miketheprintman Ай бұрын
I only had to replace ours once in the couple years we had our 365. Pretty simple swap. It lasted a lot longer than I thought it would too.
@DaPrintHouse Ай бұрын
Ye I was shocked as well. That's not bad at all. prinheads lasting over 4 years is impressive for me
@stickerhoggz Ай бұрын
Good to see you again. Been a few. I did some research on those CNC machines and those onefinity ones are highly rated. Funny enough, i am also looking into getting a fiber laser. Still researching which one would work for what i want it for.
@DaPrintHouse Ай бұрын
appreciate that! SO ye i have owned and operated CNC machines at home for over 20 years, and have had several IN MY TIME LOL. my biggest pet peeve is the lack of rigidity and using belts and bearings for slide systems. most my cnc use is for Aluminum RC Car parts. but when i wanted to explorer a bigger decent wood CNC for making signs i also want rigidity, and all those low end x-carve or shapeoko type systems just don't cut it, sure they work, and new comers don't understand the important in rigidity. so i got to see the onfinity cnc machine in person before picking one up, and wow they are built like tanks! im super excited! fiber laser has been in my shopping cart for a couple years, was a matter of time lol goodluck on yur search, the one i have sitting here is a rayco type system nothing special but most of them are built the same. thanks for watching!
@miketheprintman Ай бұрын
New toys? It's not even Christmas yet, haha. How exciting. Looking forward to seeing some new Da Print House content, regardless of what it is.
@DaPrintHouse Ай бұрын
Lol def new toys. Was extended birthday presents lol
@SebaSiraco Ай бұрын
Hola, soy de Argentina. Las almoadillas usadas se pueden limpair con algun producto y reutulizar? Cómo se cuando ya no se debn usar más?
@boyd241985 Ай бұрын
Love this thank you
@wichycruz5868 Ай бұрын
If your starting up this machine is perfect I don't think you want to start up with a 20k machine
@DaPrintHouse Ай бұрын
@@wichycruz5868 def agree 100%
@KtuluLeaderRise Ай бұрын
What printer do you use to make rolls of stickers ?
@DaPrintHouse Ай бұрын
For rolls i used epson 6500. I did videos on it.. but that with a roll rewinder u would be set to get started. Thx for watching!
@KtuluLeaderRise Ай бұрын
@ would you be willing to sale it? If you don’t use it and it still works
@DaPrintHouse Ай бұрын
@KtuluLeaderRise if u were local. Would t want to ship it
@1620GarageAndFarm Ай бұрын
Great video… I have my own small maker space, and have been looking to add a printer like the BN20… one just popped up on my local market place for 1500 bucks, I might jump on it. Perfect for the hobby type guys !!
@DaPrintHouse Ай бұрын
great printer to get started with!
@KingCrabWok 2 ай бұрын
Well done
@miketheprintman 2 ай бұрын
Must be fun working on all those different types of projects each day.
@DaPrintHouse Ай бұрын
signs is life mike! :)
@EUCvibes 2 ай бұрын
It would look better if behind the S was a mirror acrylic
@DaPrintHouse 2 ай бұрын
Prob, but customers design
@vadiehrahmani2602 2 ай бұрын
How can I cut automatically?
@DaPrintHouse Ай бұрын
not sure exactly what you mean
@andrewhorn1842 2 ай бұрын
How do you get the outline on the cross hatch?
@DaPrintHouse Ай бұрын
its a setting in lightburn, sometimes a different color line like black