Quels sont les symptômes si c'est pièce son défectueuse ? Merci
@luigiristagno22453 күн бұрын
I have the Same Problem, Do I have to unlock the mechanism when the door panel is of?
@patrickXWAY3 күн бұрын
salut Adrian , 😀d'autres vidéos pour 2025 👍
@peterlandbo272622 күн бұрын
My Peugeot 107 growls more than this
@AdrianLeggettUK22 күн бұрын
@@peterlandbo2726 please post link to video. We are dying to hear it. Cheers
@sahrulnizamsaya436428 күн бұрын
What filler rod number?
@juanmaldonado3281Ай бұрын
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@AdrianLeggettUKАй бұрын
Thanks
@fyghetrАй бұрын
its either slide show or this.... why cant they make a deaccent tutorial....
@MagurattiАй бұрын
Zf ?
@DidierMairetienneАй бұрын
Bon travail, Avez vous une vidéo pour le remplacement des Silentblocs avant des triangles haut et bas ?
@AdrianLeggettUKАй бұрын
Thanks. Sorry, no, I haven’t needed to do that but I’m sure I will be in the future. Cheers Ade
@Ayan-p7l2 ай бұрын
The best thing is that these quattroportes are cheap on autotrader Literally anyone could buy one
@AdrianLeggettUK2 ай бұрын
@@Ayan-p7l Maserati don’t hold price anyway but lots are cheap for a reason. Anyone could buy one. Not everyone could run and maintain one.
@RyanFerreira-s1n2 ай бұрын
I was right next to the fire 🔥 it was HOTTT
@facts90512 ай бұрын
What does this do?
@jakobrebeki2 ай бұрын
Just wanted to ask are you going to carry on with the GS550 or are you now doing different stuff....
@12345rpm3 ай бұрын
Many thanks for this video and your effort in producing it. Helped me a lot. Realised I am a subscriber when I wanted to subscribe.
@20Unknown3 ай бұрын
Any problems with your DuoSelect transmission yet? I'm considering one with the F1 automated manual over the ZF shiftable automatic.
@AdrianLeggettUK3 ай бұрын
Hi, I’ve not had any problems with my F1 transmission. It does need clutch, which I am about to sort.
@ywileo3 ай бұрын
How to remove gloves box cover?
@AdrianLeggettUK3 ай бұрын
Not done that yet. If I do I will post a video. Cheers
@nicolastissier22843 ай бұрын
The best sound❤
@AdrianLeggettUK3 ай бұрын
Yes, I love it ❤️
@arbitrader8933 ай бұрын
The F1 was meant to be driven like a stick , let of the gas as you change gears and its a drivers car. Same transmission as in the F430 or 599
@rayfordwilliams91503 ай бұрын
Replace blow motor
@jamesboggan1183 ай бұрын
No commentary throughout the entire video and rightfully so bc the sound of that V8 will leave you speechless…! 🤐😶
@kimsj15704 ай бұрын
👍👍👍👍👍👍👍👍👍👍👍
@ExquisiteMary4 ай бұрын
You go too fast in your zoom too close to see
@edan72874 ай бұрын
Normal speed would have been more helpful 🤦
@Lardybloke15 ай бұрын
Have forwarded this onto my friend, he wants to build a GS560 cafe racer 👍
@deang59915 ай бұрын
I had same. Larini x pipe and tubi mufflers on a cambiocorsa coupe. Deep and high pitched sounds at the same time. Sounded WOT at any speed. Very aggressive. My neighbors hated it. 😂
@MA-jr8xh5 ай бұрын
Hello Adrian, thank you for the great video and explanations. Was your fault Code 0340 as for the Cam shaft position sensor? Thanks a lot Matthias
@josbuijk79115 ай бұрын
Thanks , thanks. Very useful for my towbar project. Bumper had to be removed for this and thanks to you it was an easy job. However , It wasn't necessary to remove the amplifier on my 2007 QP .
@AdrianLeggettUK5 ай бұрын
@@josbuijk7911 excellent. Pleased it help. Thanks Ade
@juventosboy5 ай бұрын
4.2L V8
@juventosboy5 ай бұрын
Which Larini set up, link plz.. my 2008 GTS is 44K km only 😅
@AdrianLeggettUK5 ай бұрын
Hi, I have Larini cats, Tubi back boxes and standard resonator. Cheers
@tadsworkshop6 ай бұрын
Adrian, all things considered, what would you recommend for doing the passenger rear window regulator on an 07 M139? Mine just failed today. Would you recommend a repair kit, or should I really go out of my way for a complete regulator? I’m assuming only Maserati has it….not sure if they are aftermarket complete regulators.
@AdrianLeggettUK5 ай бұрын
Hi there, if you search eBay for ‘Quattroporte window regulator rear’ there is a complete setup excluding the motor. I’ve just bought one for the front as my opposite to the one I fixed using the repair kit containing sliders and cables has now failed. Will report how it compares.
@jakobrebeki6 ай бұрын
I love Wales. Nice untouched unspoilt area as well. My sister lives just 30 miles past Carmarthon. The summers down there are great. We often walk the trails. Did you know how to tell the difference between an English Deer and a Welsh Deer? It's easy, the Welsh Deer speaks with a Welsh accent. Sorry for sliding in that dad joke, my niece told me that one. She is 8....
@jakobrebeki6 ай бұрын
Your braver then me. Did a bungee jump some years back. It was fun but never again. hope you enjoyed it, have a great day....
@nicklisoire6 ай бұрын
Hi Adrian. I've trawled through the forums, can't seem to find out how to change the windscreen washer pump on the M139 (think it's behind the pax side wheel arch?). Any idea please? Sorry to ask, I know you are not an agony aunt but thought you may have the knowledge!?
@AdrianLeggettUK6 ай бұрын
Hi Nick, I think it is mounted to or behind the washer bottle. The bottle is fastened at bottom to a bracket on the chassis using nut and bolt. Same at top. Remove the front under tray and you will be able to access the nut and bolt at bottom. Think you disconnect tubes, undo nuts and bolts & lift out bottle or drop out bottom. Part number 13 - www.scuderiacarparts.com/part-finder/maserati/quattroporte/oe/79/3573/63158
@nicklisoire6 ай бұрын
@@AdrianLeggettUK Once again thanks so much for your help Adrian. I'll give it a go when I get a chance. Keep up the Channel with great informative material 👍
@Bruceybonus20086 ай бұрын
Great Vid, but any idea how to pop the boot when the key release cable doesnt work ( even by pulling it manually ) and there is absolutely no power to the car (battery is disconnected). This the problem I currently have. I've tried everything I can find on the net so far, but still can't get it open!
@AdrianLeggettUK6 ай бұрын
Hi, when you say pulled it manually, do you mean that you removed the trim plate and boot release to expose the cable and then pulled it? If so, sounds like the cable may have detached from the latch. This video kzbin.info/www/bejne/hHOnpIyJmrt0f8Usi=ksUPAWyP4WQ6qRof shows the mechanism inside the boot. Not sure if this helps. Not sure how you will access the latch without being able to remove the inner boot lid liner. Is the boot release motor dead?
@Bruceybonus20086 ай бұрын
@@AdrianLeggettUK Yeah cheers Adrian, removed the back plate, noticed the cable had popped off behind where it attaches to the key mechanism, pulled it many times with some force, can feel it attached to something, but its taught. Pulling on it whilst pressing the boot lid didnt release. Obviously can't access the inner liner as the boot is still shut!, trying to work out how to get power to the actuator to see if that releases it but not sure how to do it. Tried power through the bonnet method, but didnt seem to work yet , but that was with one of those little boost batteries. Going to try a proper battery next!, but definitely running out of ideas!
@AdrianLeggettUK6 ай бұрын
@@Bruceybonus2008 it’s a tricky one. Will be worth trying with a good battery. Will be interested in hearing how you get on.
@Bruceybonus20086 ай бұрын
@@AdrianLeggettUK will let you know!
@Bruceybonus20086 ай бұрын
Yeah success! its was all down to the lack of amount of juice I was putting in... made a makeshift cable to the anchoring point in the front fusebox under the bonnet, Negative anchored to bonnet release catch, jumpleads to my mates qp5 battery, dash electrics fired up, and eventually the boot lock actuator released after a few attempts from the key fob but not the dashboard button.. so next job is to order a new boot release cable, reattach and hopefully that should solve the problem.. should be back up and running within a couple of weeks! So that answer is yes, it does work when the main battery is disconnected :)
@jakobrebeki6 ай бұрын
Hello, glad to see you back again. On my GS I fitted electronic ignition. The difference was very noticible. The wiring on the bike was in good nick so never had to mess with that. Thanks for posting, have fun....
@AdrianLeggettUK6 ай бұрын
Hi, yes I'm back. Electronic ignition sounds good. Trying to post more regular updates from now. Cheers
@Duckandcover016 ай бұрын
Excellent solution to my problem. Many thanks.
@AdrianLeggettUK6 ай бұрын
Pleased you found it useful. Cheers Ade
@jakobrebeki7 ай бұрын
That's got one nice growl to it. I bet it sings at speed....
@AdrianLeggettUK7 ай бұрын
Yes it sounds nice Sturgate Straight - Maserati Quattroporte - Larini / Tubi - 16th July 2022 kzbin.info/www/bejne/jWXWoqKrhZ5nnqs
@VanderlayLux7 ай бұрын
This is a brilliant video. Super helpful and very eloquently explained. My only gripe is the background music!
@AdrianLeggettUK7 ай бұрын
Thanks. I agree with you on the music. One of my early videos 🤣.
@jakobrebeki7 ай бұрын
supurb job, looks great....
@AdrianLeggettUK7 ай бұрын
Thanks
@sachascurlock9687 ай бұрын
Hi, if you are going to strip and clean the carbs in a video, please will you mention the jets sizes and mixture Settings as I have the same bike with pods and it’s being a nightmare to set up. If I can get ur settings at least it will be the right ballpark I’m hoping 👍🏻
@AdrianLeggettUK7 ай бұрын
Hi, yes it is a full strip down and rebuild. I will definitely be looking at the jets and setup as it was hesitant on the throttle and pickup. The pods look good but (not these ones) but I understand are troublesome. Cheers Ade
@jakobrebeki7 ай бұрын
Turned out quite nice. When I did the cases on my 1976 CB/CG125J I used paper, soft wire wall clean clothes and solvo autosol. took a while but they came up good. Thanks for posting....
@AdrianLeggettUK7 ай бұрын
Thanks. Looks a lot better than the photo. Photo appears to show scratches that aren't visible.
@Idkwhatimdoingeggyt7 ай бұрын
Is that a stock engine??😮
@AdrianLeggettUK7 ай бұрын
Stock engine. Larini cats, Tubi back boxes and standard resonator 😀
@Idkwhatimdoingeggyt7 ай бұрын
Is that stock?
@AdrianLeggettUK7 ай бұрын
Stock engine. Larini cats, Tubi back boxes and standard resonator 😀
@isirius-constantingligorie46727 ай бұрын
Hello, if you want to sell the x pipe and mufflers let me know ,I have 3000 euros to spend , I will pay for transport (România/est Europe)
@AdrianLeggettUK7 ай бұрын
Hi there, sorry not for sale. There are plenty of them around on eBay & Larini site. Cheers Ade