@@ashlytyson8380 Not sure, this was a few years ago. I just posted this as a general generic look at how the sunroof drains look from the inside when exposed.
@S7ENLI8 күн бұрын
Great video! Thank you! :)
@jio852020 күн бұрын
Excellent my friend!👏👏👏👏👏 Yes like others commented. You showed exactly the perfect angle for the proper maintenance. I myself have used the air duster can's to keep everything dust and debris clear. Yes a car fanatic lol. Have a pristine 2006 300 limited. 112000 original on this beast. Twice a year also lubricant every piece of rubber with pure silicone spray. Especially the rubber sunroof seal. Just like us maintenance is key. Thankyou for a superb job for an OCD car guy. Obsessive Car Disorder!😂🤙
@eldigitom968020 күн бұрын
@@jio8520 fantastic!✌️
@gordco129 күн бұрын
Absolutely, excellent video. Thank you.
@eldigitom968029 күн бұрын
Thank you sir, I appreciate it!
@limbicbrain1Ай бұрын
I have a 2013 Corolla. Water pooled up on the floor, so I opened my sunroof and poured in a cup of water, which sat stagnant. I poked around the front drain holes with a paperclip, and all the water drained out through the bottom by the front tires. Thanks for the video, it helped me immensely!
@eldigitom9680Ай бұрын
Fantastic! I love hearing that✌
@HunterDBNАй бұрын
Thank you!
@jimmycates9631Ай бұрын
Any chance that drain tube can become disconnected by using compressed air? I’ve heard nightmares of this
@eldigitom9680Ай бұрын
I would say no--there are many comments below about this--unless it is already partially dislodged. Also, as shown in the video, it is not an essential part of there unclogging process, and should not be done until after clearing out the debris causing the clog...thx!✌
@savasknayturk5649Ай бұрын
Bicycle brake cables can also help you
@Jason-cz3bvАй бұрын
Or they could have just simply not invented the sunroof which would have saved us all a whole hell of a lot of trouble.
@eldigitom9680Ай бұрын
@@Jason-cz3bv I concur. Sunroofs, T-tops, convertibles, etc..
@zeezzuu6481Ай бұрын
2:39 Drain gang
@ChilloutdesertАй бұрын
Does the door handle need to be unlocked or locked before removing it? Or does it matter? Thanks!
@eldigitom9680Ай бұрын
@@Chilloutdesert well, the door has to be open in order to access the locking screw, so there would be no need to lock the door. Usually I would say all handles should be unlocked first, good luck. Are you not able to unlock the door?
@ChilloutdesertАй бұрын
@eldigitom9680 they lock and unlock normally. I was just wondering! I am going to be removing them to wrap them tomorrow and just wanted to make sure.
@eldigitom9680Ай бұрын
@@Chilloutdesert yes, I just remember the one thing on this one to be aware of is; to loosen the locking screw you turn to it clockwise. So it is clockwise to loosen, counterclockwise to tighten when reinstalling the handle.✌️
@ChilloutdesertАй бұрын
@@eldigitom9680 thank you! Appreciate the video.
@fabianalvaradoe2 ай бұрын
Been looking for “beauty ring” for my Ford Lightning. Couldn’t find the part name, hope this helps me. Thanks!
@GJH-q6i2 ай бұрын
Nice job showing blade belt replacement. Most concise of several videos viewed. Camera work was awesome. Thank you!
@timothymatthews10882 ай бұрын
Perfect video! Every explanation was textbook and your camera work was great! Thank you for your time making this video it was perfect
@TheEdis972 ай бұрын
I just did this my truck today, thank you very much, your video was very detailed it helped a lot
@eldigitom96802 ай бұрын
@@TheEdis97 fantastic!✌️
@simontist2 ай бұрын
Do you know if the handle can be disassembled to paint?
@eldigitom96802 ай бұрын
It's been a while since I've seen one of these handles, but I just re-watched the video and I'm thinking it might be pretty dicey trying to take this one apart. I'm sure it can be painted someway though, everything can be done at varying levels of satisfaction. Good luck to you!
@simontist2 ай бұрын
@@eldigitom9680 my one has wonky electronics and there's one available on eBay but wrong colour of course. Other option is to swap the electronics but that might not be possible either. Ah I'll just wait for a right-colour one I think!
@sonofagun53053 ай бұрын
Just saying, you can also install a sort of gate to prevent large particles from entering the tube. A bit harder but just takes some measuring and cutting really.
@westhavenor95133 ай бұрын
Thank you! I just replaced the back window in my 2003 F150 using your instruction. FYI folks, don't drop those 9mm nuts down behind the sheet metal stampings--they are not retrievable, even with a magnet. Have to go buy a couple at the dealer now.
@eldigitom96803 ай бұрын
@@westhavenor9513 you should be able to find some nuts with same thread at Home Depot or Lowe’s, etc., much cheaper. Good luck.
@jonjones67493 ай бұрын
Finally someone with common sense.
@eldigitom96803 ай бұрын
thx, you're very kind✌
@MeatWagon19673 ай бұрын
Really good video that has a lot of detail that other videos don't have. I have the rear door handle lights to replace on a 2026 RS6. The mech looks very similar and in the morning i'll have another go - this time pushing the locking nut back in/out to lock the release lever/handle position. Didn't see this mentioned else where before and it's likely to solve my problem, fingers crossed for tomorrow.
@eldigitom96803 ай бұрын
oh yes, good luck. I've been in that situation before and was forced--through need--to find that workaround. You'll find the same procedure necessary in several other door handle styles (especially German).✌
@MeatWagon19673 ай бұрын
@@eldigitom9680 Yes, The detail you added should make the difference as I cant get the handle to locate back on the lug on the release lever during reassembly, Thanks again and I'll drop a further note here tomorrow with results.
@abbyramirez693 ай бұрын
Thanks so much for this video!! Almost unsliced myself struggling with it😂
@eldigitom96803 ай бұрын
haha! glad it was helpful✌
@ISIAH_STL3 ай бұрын
Mine is leaking in the rear
@xxxdylanstonexxx3 ай бұрын
Easiest thing to clean my ass. I’ve blown mine with air, used weedwacker line, you name it. Still pouring into my floorboard
@johnbarrels28134 ай бұрын
I was wondering where he is located, need someone to replace my rear winshield
@albertgonzalez65114 ай бұрын
Awesome video. Short and Sweet.
@moncorp14 ай бұрын
careful. I wouldn't use air. Those hoses have been known to blow off if they're getting old. Just clean the drain hole then pour some windshield washer fluid down the drain. Just a little, like half a cup.
@eldigitom96804 ай бұрын
I agree with that, I've emphasized it many times in the comments below--that air is not necessary for cleansing the hoses. But it's also an exaggeration that it will damage them, definitely should not be done before the clog is removed though.
@teddis01434 ай бұрын
Thank you so much for posting this ………you still helping people! Cheers.
@karronlaneNOLA4 ай бұрын
thank you so much!!
@marcchantal50164 ай бұрын
Very well explained keep them coming.Thanks for sharing.
@brownedirt4 ай бұрын
This was so helpful. When our door handle popped off I was sure I’d be in for a 1-2 hour repair. Instead door was fixed in less than 10 min
@eldigitom96804 ай бұрын
@@brownedirt I love to hear that…thx!
@Нурмухамед-д1ч4 ай бұрын
Спасибо. Привет из России
@eldigitom96804 ай бұрын
✌
@MansoorAuto2k4 ай бұрын
CANNOT thank you enough for this video. I’m embarrassed to say how long we spent trying to put a handle back in because like dufus’ we removed it incorrectly and could not figure out how to reassemble it. But as you so clearly showed you have to “reset” the mechanism.
@eldigitom96804 ай бұрын
Fantastic! Yes, these German door handles are always formidable✌
@Carlos-pintorcarro4 ай бұрын
My drive belt keeps coming off of transmission ! Any ideas ?
@eldigitom96804 ай бұрын
@@Carlos-pintorcarro yes, I was having the same problem beginning of last year. Could only get 3-4 hours out of each belt I was buying from Amazon. Tried several things but what fixed it was buying a genuine Toro belt. This one has lasted over a year, there really is a difference in quality OEM replacement belts. These can be found on Amazon by the way just make sure it’s genuine Toro.
I'm having this issue, but my sunroof doesn't even work so I have no access to it. It leaks on both sides, as well as the back and is only getting worse.
@eldigitom96804 ай бұрын
I'm sorry to hear that, but you're probably going to have some mechanical costs to fix that problem. I'm always quick to tell anyone who will hear, 'never buy a car with a sunroof'. The benefits do not outweigh the nuisances.
@stephensomersify5 ай бұрын
Very useful and well presented sir - ------------------------ old git, UK
@eldigitom96805 ай бұрын
@@stephensomersify thx old git✌️
@jasonmaes60215 ай бұрын
Great video.
@eldigitom96805 ай бұрын
thx!✌
@олегмунтян-з7б5 ай бұрын
Спасибо вы нам очень помогли 👍👍👍
@sallysingerlbk5 ай бұрын
Thank you so much! I need a flashlight!
@SallyLanger-rd6ew5 ай бұрын
If you don’t have a blower, what else can you use to push the air thru? Thank you!
@eldigitom96805 ай бұрын
@@SallyLanger-rd6ew One viewer left a comment recently, where he used a condiment squeeze bottle filled with water to push the water through the tube. However, usually the only thing necessary is to scrape the debris from around the opening of the drain hole. The forced air is really an optional follow up after the drain has been cleared. It should never be used before the drain is cleared. Good luck!✌️
@MrOysteinBach5 ай бұрын
No chit-chat! Just pure information :-) Can't be better.
@eldigitom96805 ай бұрын
@@MrOysteinBach ✌️
@Nook.2xx5 ай бұрын
Hey, I want to try this how long does this fix last? I have a G37x Infiniti leaking on the passenger side when ran through car wash.
@makeitright11295 ай бұрын
Weehoo!!! Belt replaced, thank you so much!!
@Nook.2xx5 ай бұрын
Hey I have a Infiniti g37x with a sunroof as well, water is leaking on the passenger side. Could a clogged sunroof drain be the issue?
@eldigitom96805 ай бұрын
Try the method shown in the video, by pouring a small glass of water into the front corner drain area. Wait a few seconds to see if it drains quickly. It should, but if not try the procedure shown. good luck
@dadthefixerflorida5 ай бұрын
I’m gonna try this. I was going to buy a long wire brush/pipe cleaner on Amazon. But I’m gonna try this first!
@eldigitom96805 ай бұрын
@@dadthefixerflorida good luck, my friend! I hasten to add that 90% of the time the only thing needed is to scrape the muck away to expose the drain hole opening. Hardly ever is it necessary to run a line down into the drain tube. Hope this helps.✌️
@joshuamoore24_75 ай бұрын
I used a piece of round trummer line also, lol!!! I also used a condiment squeeze bottle with water in it to squirt water into the drain openings.
@eldigitom96805 ай бұрын
@@joshuamoore24_7 that squeeze bottle is a good idea…thx!👌
@hoshgeldibozarov8046 ай бұрын
Sankyu .
@baseballguy20016 ай бұрын
Excellent video, well done.
@kuletz1716 ай бұрын
where can i get that nylon and how thick it is?
@eldigitom96806 ай бұрын
In the video I was using precut 18.5" long 0.155 inch replacement trimmer line. You can find it in stores like Lowe's or Walmart.
@vmgf14376 ай бұрын
Careful with the compredd air. If the drain is still clogged, you can rip a hole in the tubing.
@eldigitom96806 ай бұрын
Yes, as stated at 1:40 in the video, compressed air is not necessary for unclogging. It is only used to clear any small remaining residue in the line.
@donyvette34966 ай бұрын
Worked perfectly to unclog drain on my A6 gas filler area. Thanks, All, for the various ideas.