Ive been having the same problem. Replaced all the main components with no change or help to the original problem. I'm going to try your fix of disconnecting & blowing air through the lines. Fingers crossed!!!

I just bought a 99 Fleetwood Bounder 34V. I've enjoyed watching your videos regarding your rig too. I have taken on a couple of DIY projects thanks to your channel. I did have a question regarding what are you using at the 08:27 mark in the black bucket? Thanks again for all the content.

Can we put the crazy seal on top of rubber or vinyl ? Thanks Nice work

This is 100% not the way to do this. I can guarantee and bet my life that these have come down by now because between the oak trees in the backyard, the squirrels, and rain/snow.... that deck is smelling like decay right about now. The pockets created by running the mounting boards perpendicular to the floor joists creates stops for all the debris that gets between the deck boards to basically be trapped forever. In the wintertime, it will freeze, soak, and fracture the pressure treated lumber used to build the deck.

This is the exact problem I’m having. Which thermocoupler is it?

Finally, finally a guy with brains I got to see how you take off the cover for the EO and the thermostat and I watched you remove the two sensors and clean them nowhere else could I find that and I looked for hours thank you thank you thank you ha ha God bless America. !

You raised the shed door hinges. Wondering if it affected the bottom latch This shed is exactly what I think I need. I will jump on this project tomorrow.

They advertise in their video that you can use these sensors on the top front corners to prevent overhang collision. Have you tried this? Curious if it gives false readings if your vehicle is 12 ft, and an overhang is 13 feet.

At 1:04 youre cleaning a patched section of the roof. Do you have a video showing how you made that repair?

Hey dude, did you have any soft spots in the wood before you started the new roof work? How did you determine if it was worth replacing a section or not? My used 1997 Bounder has some soft wood sections, but a new roll-on roof from the last owner. They didnt replace the soft spots. I'm wondering if I should dig into it or let it be.

Helpful, but all that I need to know. I am a 74-year-old, 150 lb woman who lives in a 36ft 5th Wheel that has water damage in the floor of all three of the slide-outs. I am fixing the water leaks, but my rotted floor includes the wood beams or whatever they are that hold up the floor. Everything is rotted down to the outside aluminum on the floor. How do I fix that?

What product did you use exactly? Do you have a link?

Your pause and cut scene shota are way too short to provide details otherwise nice detail.

Cross braces...triangles rule in everything from this project to building aircraft.

Hi there, just wondering how the electrical stuffi s working in winter with possible snow/ice/water over the deck? Is it holding up well without any leaks around the electrical connections? thanks

After changing out every component on my water heater with no fix to my issue. I tried blowing out my gas line as you did. I put everything back together and Light the pilot, turned on the valve and the water heater fired up and ran perfectly. I still don't get why this worked, but it did. Who'd of thought.

I’m guessing all the dimensions are a secret?

I am at that frustration now. Changed out everything except the gas part and I haven’t cleaned out the lines. I’m thinking that’s it. Thanks for the info.

excellent

Heat gun

Nice roof

Looks like a great build. What kind of wood did you use and did you treat it with a sealant at all or no?

What brand is the tool to make the pocket holes?

How does the rain water run out so the wood does not rot?

looks great! How did you seal the parts that had to be cut around the diagnol bracing? I am running into this issue now because my deck has a 1-2 foot cantilever so some of the bracing is in the middle of the panels. I'm not sure how to seal it without also causing blockage from the water flowing past it?

Nice job

🎉

I just bought a camper for pernamant living 3 weeks ago and found out my sons room slide out is rotted. Its a flush slide out and ive watched so many videos but I feel like I cant do this job myself but I have to. I cant afford to hire someone and its just my 4yr old son and I. This video was helpful but still looks like the mechanics of the slide are different as yours stays sitting on top. Mine comes up from flush and in. Its a small slide, maybe 5ft but feel like I'm going to screw something up!

Does this model use an anode rod? It seems like one could go in the drain plug hole , its about 10" deep, but nothing in there when I got it. 2011 coachmen class c

Thanks , nice video. I think this will work for me also .

Buenas tarde maestro ,tango un fleewood bounde del 1997 de 32 pies ,quiciera saber cuanto minute se le da a la bomba para q el agua llegue a la llave

Do you do orders?

Do you have the dynamics and scale for when you made this, I want to make it on my 3d printer

i have a 4x8 sheet that i am doing on my 5th wheel slideout , what kind of tarp did you glue onto the plywood

amazing brother, im also a big fan of the monster energy logo and never drank one before haha . great job!! - Tom Hanks

SHOW US HOW YOU WATERPROOFED THE JOIST ?? The best way to prevent rot is to ensure the wood never gets wet. This can most easily be done before the decking boards go down during construction. First, shield the tops of the joists and beams with waterproof flashing tape. There are commercial butyl tapes designed to be the right width for this purpose. With self-adhesive tape, the application is relatively easy. Additionally, by applying joist flashing tape before screwing in hardware, you can create a barrier between the fasteners and preservatives in the wood that lessens corrosion. Thus, flashing tape protects in two ways, reducing corrosion and waterproofing the top of the wood beams and joists.

Where was the leak ...to cause the dsmage ...😊

I wish he would've put the specifics of the materials that was used. I just bought the exact shed and I have a 4 wheeler and need a ramp as well.

Fantastic, I have a 98 bounder and mine needs looking at as well. Now I have to ask. Did you say that there is a solenoid in the box that controls power going to the genny to start it? I am having a hard time getting full power to mine to start it. Subbed

Top work 👏👏

How is the roof holding up

Can't wait to get some trail time!

Looking good buddy. 👍🏻😃

Tried a bunch of different things and this is the one that work. Thanks a bunch.

why do all of you guys mix these trailer build videos with the worst electro music I have ever heard?

Thank you my good sir , your video is the only one out there , I got the same heater.

I mean Aquaman 2018.

Do you also build another trident only pure gold in 2018?

That grill looks so much better. Very nice 👌

Thoroughly enjoyed this, thanks!