Yeah 👍 😂

Yes, I always loved the 147, a very sweet car and so unique...

@serpentcrown absolutely

No it’s all standard

@@ashab1 check if all connectors are connected right. You use Multiecu?

@@musmuk5350 don’t Know…I don’t like it either 😃

@@ronvleeming2536 the locking tools should be strong enough. Beware of cheap tools

Thanks, hope i have ordered are good quality lock tool in that case.

@@spice3767 if you ask me I would say it’s not worth it….maybe a little … but not much

@@Bruceybonus2008 yeah tunnels are fun 🤩

You have to loosen the tensioner screw a bit before you push or pull with a flat long screwdriver… than it should move… If you don’t loosen the tensioner screw it won’t move. Hope I could help you with that ?

@@tjshill82 yes I guess every Tbi has this problem sooner or later

@@andrewaksnes5107 30 - 56k

Name is : Alfa Romeo "Rosso Competizione " what else...

I think it’s called gun powder grey or something

What do you mean ? This isn’t one hour

@@ukaszzawadzki5177 it’s something else. Don’t know how you call it…I think it’s polydrive?

@serpentcrown yeah thanks bro im preparing to change belt in my giulietta.But inside the camshaft there is torx?

@ yes

@@serpentcrown do you remember the size of torx?

@ no sorry

@@tonymakerrony3796 ohhh yes 👍

Oh god :D.....that sounds like a lot of work and dangerous job :). I feel with you....I know these times while laying under the car...you sometimes ask yourself what if? But there is no time to think about that! :D Good luck Bro!

@serpentcrown exactly. But i have to do it myself. Bill for such repair would not worh it. On the other hand i really like this car so,there is always only one choice-try it at least

Better not :D

@serpentcrown I feel you. Had the 1.9 jts and I could see the needle move, in real time 😅. Sold it and went for the diesel alternatives

Hi there, thank you for your response. Well that’s very annoying that it is leaking again. I guess you have to be very careful when tightening the screw because if the gasket is somehow loosen on one side then it could be leaking from there if you know what I mean? Could be because of that yes…or you have to replace the gasket again :(. But you don’t need to lubricate that is not necessary. Re-assembling there is no precautions…just do it the way you loosen all. Sometimes it also can be because of the membrane on top where the two hoses go in. But if you don’t have oil top everything is fine

@serpentcrown Thanks! I ordered the rubber gasket and I am going take the valve cover off this Saturday. But guess what, I spoke to another mechanica today and he said you should use liquid gasket.. That does not sound right, does it?? I am pretty sure the rubber gasket should be used, the way you did it. I will let you know what I found.. Btw, keep it up with 939 video's, love ''m!

@ well I didn’t use any liquid for the gasket, otherwise I would have mentioned it in the video. I did it I think a year ago and till now everything is dry. I think once you take of that gasket you have to get a new one because of the heat and all it fits itself right and when you take it off, it gets damaged

Hi I’ve just removed my Injectors on my 1750 and it’s not necessary to remove the cover on top of the engine to gain access because they are below the inlet manifold. Unless other work was done on top of the injectors it should have been left in place

@ , you are right, my mistake. I found out later that not the valve cover gasket was leaking oil, but the oil separator and the ventilation tube coming from the intake manifold. But I removed the valve cover anyway, to clean it out and to replace the membrane of the oil separator. Still have to put it back on but hopefully it will resolve all the issues that this leak caused!

V8 - nothing better 😉

@@serpentcrown I can find 4.7S QP GTS everytime but your interior trim level is another level! Red stitches with carbon...

Your absolutely right 👍

Thanks 🔥

@@DaijoKojinzo vielen Dank! Ja ich denke Ragazzon ist schon passend für den 3.2. Obwohl ich auch gerne wissen wũrde wie die CSC bei dem klingt. Lieben Gruß

​​@@serpentcrown ich finde die CnC mehr "knatterig" mir persönlich zu hoch im Klang. Die Ragga hat einen schön dumpfen blubbernen Sound. Und bei volllast klingt sie sehr aggressiv. Und ab kat in >70mm Durchmesser im abgasstrang entfaltet sich der Klang so richtig ? Was noch rann kommt ist bastuck die ist brutal😅?

It’s not ugly …

@@ck24support ja 👍

@@ck24support nein leider nicht mehr …

@@Anthony95918 thanks mate 🙏

No it’s 1.75 turbo

Maybe yours manual

@bassterritory1479 Well, of course.

Yeah ;D

"quattroporte" :D It's nice to see small kids still getting excited about Maserati V8 from 20 years ago

Maseratis gain a lot of attention i had also one, little kids go crazy for them 😂

@ yes especially when you drive in sport mode … why did you sell yours ?

@@serpentcrown oh yes, i sold it because someone offered me good money, but i regret selling the Masterpiece…

@@MadLab_Press not exactly - it’s serpent crown 😉😃

@@naturescience7475 thanks man !

From the Vacuum pump