Hello bro, first of all thank you for sharing your experience and info. I have exact same problem and i already ordered gasket thanks to you!
@serpentcrown7 ай бұрын
Yeah, pay attention to the torque…since I changed the gasket everything is dry
@mrbenzina326 ай бұрын
thank you very much for sharing 💯
@danidin-h8j2 ай бұрын
Hello brother, great videos!! pleasure to just sit and watch them!
@serpentcrown2 ай бұрын
@@danidin-h8j hi there ! Thanks for watching and enjoying my videos 😌. If you have oil around the pvc you can change the gasket from the pvc. But you have to be very careful because you can damage the plastic clips …. Work with heat to prevent breaking.
@serpentcrown2 ай бұрын
@@danidin-h8j think you don’t have to change the head gasket if there’s nothing wrong… but maybe it’s time for the head gasket if you have oil there😛
@pavelbronshtein34556 ай бұрын
Ohh wow. thank you!
@david.foldvari6 ай бұрын
Thank you!
@merlin51h844 ай бұрын
Was it relatively easy to remove the oil separator from the top of the engine? What is the part number of the gasket that needs replacing?
@serpentcrown4 ай бұрын
Hi there. It could be a bit difficult, because the gasket is sometimes tight on the engine. But I recommend to lessen all the screws and then carefully raise the separator from each side a bit ..it should come off than. Number is 55215302
@maxromanin17455 ай бұрын
Hello from Italy, i have the same problem on my 159 tbi...is there a gasket kit or i must put sylicone gasket paste? Thanks
@serpentcrown5 ай бұрын
Hi there - yea its a problem I think all tbi´s have that problem. You should order a new gasket. You get a new gasket.
@serpentcrown5 ай бұрын
www.alfashop.co.uk/products/4001050-159
@maxromanin17455 ай бұрын
It's incredible...do you know how much is that gasket in Italy? 55 euros!!! And there is only one available in Italy!!! We Italians are a shitty people
@maxromanin17455 ай бұрын
i have an other question...where did you find the torque specific?
@serpentcrown5 ай бұрын
@@maxromanin1745 I got the torque specs from a 4C Handbook....same engine
@alainbauristhene64275 ай бұрын
@Seprent Crown Did the separator come off easily? Mine seems to be stuck as if bolts are still on and it won't move
@serpentcrown5 ай бұрын
Be sure to loosen all screws and then lift from each side a little bit. Mine did stuck a little , too
@alainbauristhene64275 ай бұрын
@Serpent Crown Thank you for your response I'll attempt it again
@alainbauristhene64275 ай бұрын
@Serpent Crown I attempted again whilst the engine was hot and it just popped off and than you for your valuable video especially the torque sequence