We sell a PathPilot controller that works with our machines. The xsTECH has an all in one touchscreen monitor/controller.

We do have a playlist of Tormach 15L lathe video and there are a couple in here that might help. We will see if we can get a new one created focused specifically on the beginner. kzbin.info/www/bejne/fYmcloWXYs1mqrssi=d-U9yWzj9usOdfiG

There is this video that might help out until we make an updated version. kzbin.info/www/bejne/jqrNmGmhYrOKl7M

Some of the machines, like the PCNC 440, 770MX and the xsTECH Router, can be plugged into most garage outlets. The 1100MX will need a 230 Vac 50/60Hz, 20A Breaker, and the 1500MX will need a 230 Vac 50/60Hz, 30A Breaker. It's best to check out the specifications to the mill you are interested in, on our mill support page, or consult with our pre-sales team: tormach.com/support/mill

Tormach has financing available through out partners at Geneva Capitol. They have a promotion going on until the end of the month that offers half payments for half a year. Here is contact information for David and Cole: tormach.com/lease-finance-and-resale

Crate Dimensions: Factory Assembled: 68 in. × 74 in. × 89 in. (1.7 m × 1.9 m × 2.3 m) Self Assembled: 54 in. × 58 in. × 89 in.(1.4 m × 1.5 m × 2.3 m) Pallet Weight: Factory Assembled: 3210 lbs. (1456 kg) Self Assembled: 2650 lbs. (1202 kg) The weight of the factory assembled 1500MX can vary according to the accessories and upgrades.

With the crate removed, what is the minimum height you can get the machine down to? I'd be looking at maximum 76" to clear my garage door. Also when will these be available in the uk

@@mapstardamo1624 The maximum height of the machine in Z is 94 inches. To get the machine through the door it would have to stay on the pallet and then that height is 86 inches with a pallet jack, or 83 inches if you push it in with a forklift while it is on the pallet. Here is a document going over the machine footprint: tormach.com/media/asset/5/1/51221-b.pdf

@tormachinc I had seen that document. 83" is still too high even with my trim panel removed as I have 80" max (I only have 82.5" internal ceiling height but can cut a hole in it for z axis) Not looking like it will fit 🙄

We reiterated the pallet many, many times to get it right. In fact the quality team descended on this machine as well to make more improvements.

They look pretty good side-by-side too. Just saying. But if you have to make sure it goes to a good home.

Thanks! We almost cut out the, "'cause you're gonna need them" part because it was a little goofy, but we also really wanted to emphasize the cleanup. What would you do with a 1500MX if you got one?

@@tormachinc I would do it exactly like you did; I would pre-position each part to understand the contact areas to predict the squish, before committing to apply the Sikaflex. But sealing against coolant leaks is imperative, but it will be messy any way you do it. I highly prefer doing it myself, especially if it save some money, and I have no questions if it was done right. The custom shipping pallet is very clever too.

@@BrilliantDesignOnline With this method we just had the tiniest leak at one of the rear chip chutes, and it took less than a minute to fix. We also felt it was important to show what would happen with too much Sikaflex. Our solution worked well and we hope it's easy for all the self-installers out there. We also felt it was important to develop a pallet method that didn't need a sawzall.

We try our best to keep the price as low as possible, while delivering the best machine we can. Our founder would have been very proud of the 1500MX.

@@tormachinc they're so good for intro level job machines, small shops, maker spaces, light manufacturing etc. I learned to CNC program and operate on a 770, loved it. Hope some day I can have enough garage space to have one for myself.

The height of the customer assembled 1500MX on its crate is 89 inches (7.4 feet) or 226 CM (2.6 meters).

@@tormachinc Thank you for the reply. So it's not possible to roll this into a standard 84" tall residential garage?

@@AIM54A Here is a link to the 1500MX Space Planning. tormach.com/media/asset/5/1/51221-b.pdf

@@tormachinc Thanks I've seen that.. The drawing is missing the SPINDLE HEAD COVER AT (lowest z) dimension. It does have max height when it's all the way up. Or is the spindle cover level with the top when it's all the way down? Thanks again.

There is no counterbalance for the Z axis on the 1500MX. -Norman

We apologize for not answering until now. The 1500MX was designed with CE in mind. It's undergoing the CE certification process now, and we hope to offer a CE-certified 1500MX in early 2025. Once the 1500MX receives CE certification (UKCA for the UK) Tormach will make an announcement on our newsletter, which you can sign up for here:tormach.com/newsletter/manage/

400 psi -Norman

Inovance -Norman

​@@TormachTechnicalSupport Thumbs up for what you've done! I built my own CNC and now I work with a VMC-1100 Mitsubishi based machine.

Yes, the tool storage rack is Wall Control compatible. Each can hold 13 BT30 tools on the top and you can add Wall Control accessories below.

Hmm...thinking...thinking... thinking...

Thanks! We are very proud of the 1500MX and all of our employees! We appreciate the great comment!

they didnt have linear rails before?

@@ipadize Their previous mills all have dovetails

John Saunders started on a Taig in his bedroom, and look how far he's come. You are one step ahead of him if you can add washdown bars. We'll be here when you expand and, just a reminder, we offer financing. So never say never.

Don't stop using your Tormach 15L! Keep making parts.

Sorry but there is no trade-in program. Looking at the positive though...Tormach mills hold their value pretty well.

@@tormachinc I can vouch for that! I had serial # 168 of the series 1 1100 mill. I bought it used. I used it for 6 years, it paid for itself several times over and then I sold it for what I bought it for. 🤫

We're getting it all prepared to go. You can see the 1500MX in person on May 6th in Chicago at the McCormick Place. We'll be in Booth 5625. www.automateshow.com/?Branded+Show&hsa_acc=4764274990&hsa_cam=15694983575&hsa_grp=130801408319&hsa_ad=687194808160&hsa_src=g&hsa_tgt=kwd-2268372425202&hsa_kw=automate%20chicago%202024&hsa_mt=e&hsa_net=adwords&hsa_ver=3&gad_source=1&gclid=EAIaIQobChMIyP3Y6_vVhQMVSDrUAR3nzwkiEAAYASAAEgLWRfD_BwE

We don't mind critics with an open mind. We hope to make you a believer one day. Just remember that we don't lock you out of repairing your own equipment, PathPilot is open source, and our Madison, Wisconsin based company is 100% employee owned.

@@tormachinc would you offer this machine with a Heidenhain controller? :P

$ cam box isnt free. 16 30 taper tools is like the size of a shoe box, no need to tuck it up out of the way

@@ryandarrah4247Tall parts and long drills make for clearance issues with umbrella carousel. Vertical tool changer and arm alleviates clearance issue and allows for more tools. More tools=More production.

We apologize for not answering until now. The 1500MX was designed with CE in mind. It's undergoing the CE certification process now, and we hope to offer a CE-certified 1500MX in early 2025. Once the 1500MX receives CE certification (UKCA for the UK) Tormach will make an announcement on our newsletter, which you can sign up for here:tormach.com/newsletter/manage/

@@tormachinc Awesome! Thanks

There are two baskets sitting in the coolant tank that can be lifted out to remove the chips. They're perfect for smaller jobs, but the chip conveyor will dump directly into barrels for the largest jobs or automation.

The Tormach 1500MX can not be used without an enclosure, nor can it be lifted with an engine hoist. It can only be lifted with a pallet jack or forklift. Here is a space planning document. tormach.com/media/asset/5/1/51221-a.pdf