2:36 I am both digusted and angered by this , Because Monster Trucks don't have the ability to go number 2 🤢😡!!!!
@Inactive1579 күн бұрын
2:36 THAT IS NOT HOW MONSTER TRUCKS WORK !!!!!! 😡
@jadenwilkie939826 күн бұрын
Can u do a video on coolant replacement VZ?
@bigred8438Ай бұрын
Bought a set of 6 SWAN brand OEM spec coils made in Germany from Bunnings for AU$286.00 in 2024 for those watching now. As Bosch coils aren't available anymore, those others are a great substitute.
@nemiroffvodka67164 ай бұрын
fyp
@khymanser3915 ай бұрын
Poor scooby his engine doesn't sound good
@wayneschenk55126 ай бұрын
6.5L of oil will be an overfill in my 05 Leo 6L is perfect.
@paul-576 ай бұрын
My VZ had a problem where it was running good until up to temp and then had a bad miss and no power between 1,500 and 2,000 rpm. Also terrible fuel economy. I also had no codes showing on Torque, a bit strange. Maybe a proper reader would get more info? I bought a set of coils, plugs and plenum gaskets on ebay for $160 and a set of injectors for around $60. I got a set of NGK platinum plugs on sale at Autobarn fro $70 because plugs are such a drama to change on these engines and I don't think cheap plugs are worth the trouble. Took me about 2 1/2 hours and it now runs a dream with much more power. I thought I might as well just change everything out as it is so cheap on ebay and I didn't want to have to keep chasing problems. I kept two of the old coils which I know are good in case I have a problem with any of the ebay coils.
@cruisnblastfan92776 ай бұрын
The Bronco With Altitude.
@tipenemason84217 ай бұрын
I really appreciate this! I've got a Holden VZ commodore 3.6L V6 Alloytec engine doing the same thing. The fact that you showed how to unclip the coil, mate, top bloke. Awesome video!
@ozziefarmboy35697 ай бұрын
My wagon was firing on 5 cylinders but all we did was change the injecter and fixed it
@pimpedoutstereos97478 ай бұрын
Thankyou for showing how to unclip the coil packs. I couldn’t find out how to do it til I came across ur video. I didn’t wanna bust the clips so I thought I’d find out first
@gatekeeper88 Жыл бұрын
10:43 same as trying to remove that fkn sensor clip from the air intake hose, had to leave it on when changing oil pressure sensor. Couldn't for the life of me figure out how to remove it without damaging it.
@Drjrey-pi6re Жыл бұрын
ok now i know how to change oil and filters. next tutorial is how to put a turbo in it 😂. thanks mate, this is the most useful tutorial. just one question, do i really need the oil flush fluid?
@AussieMonsters-on-Youtube Жыл бұрын
thanks mate. the engine flush is not a requirement, just a recommendation. there are people who swear by doing a flush every oil change and others who are like meh whatever. take your oil cap off, run your finger around the inside top of the rocker cover and if you get lots of gunk on your finger, then a flush would be highly recommended.
@richardmcsweeney5291 Жыл бұрын
very helpful, mine was cylinder5 , obd scanner said misfire cylinder5, started engine, disconnected coil 5, no change in rough idling, num 5 coil can be removed without inlet manifold removal, i put a spark plug in the coil, reconnected coil power plug earthed spark plug to manifold, restarted engine, no spark from plug, new coil from repco, all fixed. thanks again
@bodhinoowlad1268 Жыл бұрын
where you get the vid and the other spwfs
@glencoughlan7946 Жыл бұрын
I love these braindead dudes that replace 6 plugs and 6 coil packs because they are so stupid and dumb to work out what is functional and what is not, perhaps 5 plugs or 5 coil packs were completely fine and got binned because the throw away society has lost all concept of process elimination and diagnostics. Why not just bin the whole god damn engine or the car for that matter once it needs an oil change or fuel top up. Really do we need stupid videos like this? Work out what is dead and bin it, just the offending item rather than it along with serviceable parts, deep down you all know I am right! But then again, I am from another generation you don't remember or respect.
@ABJ-PRODUCTIONS23 Жыл бұрын
Only video I could find with an actual explanation on how to take the wires off and not just a explanation also video to prove it thanks heaps
@Cbowhunter Жыл бұрын
Came to New Zealand and scammed the lot of us! What a rip off
@krisPtreat Жыл бұрын
what happened to transzilla
@thomastommygun8487 Жыл бұрын
I’m taking my son to see monster mania on Saturday in Sydney if it’s like this it’s going to be disappointing after seeing what they do in USA this looks hell boring.😢
@AussieMonsters-on-Youtube Жыл бұрын
what exactly are you comparing too though?
@thomastommygun8487 Жыл бұрын
@@AussieMonsters-on-KZbin monster truck shows in USA compared to Australia? I mean they do back flips in there trucks over there and launch over jumps bigger than the truck here the jumps are tiny.
@AussieMonsters-on-Youtube Жыл бұрын
@@thomastommygun8487 if you go in there expecting a monster jam show, you will be disappointed. This is not monster jam, they are not trying to be monster jam. Also this is an arena show, not a stadium, so that's big difference as well. Qudos is Australia's biggest indoor arena, yet it's still smaller than a lot of the arenas in the US. Temper the expectations a bit, and I'm sure you and your son will enjoy the show. These guys work their butts off to put on these shows and to put on the best one possible within the limitations of the arena, the limited supply of parts & labour (something monster jam doesn't deal with). Gie them a chance, you may be plesantly surprised. I know its impossible to please 100% of people 100% of the time, you only need to look at the comments on prior monster jam australian shows or on facebook to see that, they get complained against big time as well!! Cheers
@krisPtreat Жыл бұрын
where is the transzilla for the segment footage in south pacific world finals 1
@bobburns7277 Жыл бұрын
You may regret not checking the condition of the plugs. In fact you would have been better off replacing the full set of coils and plugs. If the car has over 170k kms perhaps doing the rocker cover gaskets and cam actuator seals wouldn't be a bad idea .
@kermitmotorsports6682 Жыл бұрын
That was the same day I was there can't wait to go back again 2023
@australianmonstertrucks Жыл бұрын
Great video damo. Hope to catch up at next month's Sydney show. I was up to the right and a little higher from you. Great show👌
@simon96376 Жыл бұрын
Aussie Monster Jam Lol
@zenuqs3739 Жыл бұрын
Hey mate do I need to Torque the inlet manifold bolts and if so how much thx would help as I need this for my vz wagon
@harleyward73232 жыл бұрын
Convict is my favorite monster truck I wish to see this truck in monster jam and see them make a toy version of convict
@sackiezs75362 жыл бұрын
Thanks man very helpful
@matthewcunningham48762 жыл бұрын
You deserve a lot more likes,Thank you for taking the time to make such a detailed and informative video!
@jaykay64992 жыл бұрын
This is the kind of stuff my dad or uncle should of helped me with but lucky we all got you to help us 👌🏼
@abhijitmane73332 жыл бұрын
Very detailed, you are right couldn't find a video showing how to unplug the wiring for coil. Thank you
@Wazza7222 жыл бұрын
Great video! Finally someone has showed how to remove the coil wires from there plugs! Did you think about putting on the mace 12mm manifold insulators?
@morphman212 жыл бұрын
@aussie monsters, love your dog. What's it's name, age, breed and story of how you got it?
@AussieMonsters-on-Youtube2 жыл бұрын
Buddy is a Boxer / Kelpie cross, but very much a Boxer in personality. He is about 18 months old and my wife got him for me as I grew up with Boxers as a child and have always loved the breed.
@khymanser3912 жыл бұрын
Cool moves outback thunda
@NatashaSm1th2 жыл бұрын
Wow that’s awesome thank you sir
@jonathanbonney61662 жыл бұрын
Hi was wondering if the engine covers had nuts holding the cover down Cheers
@AussieMonsters-on-Youtube2 жыл бұрын
On the black plastic covers, there are no nuts holding it down, it just "pops" on and off, if you have never taken them off before, they may be a bit stiff and require what seems like more than necessary force to pull them off the studs, but they should just come straight off
@mohammadalali86872 жыл бұрын
The owner of the channel... Thank you so much for coming, and I have a kind of car with you and I'm really a fan of mechanics rings.
@morphman212 жыл бұрын
Damo, I know field aka monster jam owns the rights to use the scooby doo name BUT the Australian version of is ALOT cooler than the USA version in my opinion.
@Kitcat83572 жыл бұрын
Great video
@khymanser3912 жыл бұрын
I want to be a Aussie monster truck this year 2022
@peterk73772 жыл бұрын
I noticed mine sort of misses under 3/4 acceleration between 2200-4000rpm But idling it doesn't miss. Just when it's under load.
@thatonebandicootinyourback69142 жыл бұрын
Tomcat stop being a scaredy-cat just do a bloody backflip
@rodneymcmiles44532 жыл бұрын
number 6 coil was fryed ichanged it still has a misfire put diagnostic tool on it cam up with earth fault on 246 injectors
@waynejohn25672 жыл бұрын
Mine only has 5 on top is that not normal?
@philiputia61542 жыл бұрын
How to change the Radiator
@australianmonstertrucks2 жыл бұрын
Nice work Damo. Been awhile since you last posted a video. Missed a great show by the looks of it. They put on an awesome show in Wauchope a few days earlier. Hope to do a few more shows with the monster events crew throughout the next year👍 Also, did you get any video of the Jetcar? That was Dave driving it. Keen to see how it went out there
@AussieMonsters-on-Youtube2 жыл бұрын
Thanks Ant, yea been a while, but hopefully will be posting up some more stuff, including older footage from old shows i've never got around to posting now I've got my PC sorted properly. Seen a video of the Wauchope show and saw the rolly cars and instantly thought what you blokes doing there! Didn't include any footage of the jetcar in this video as it was having some issues and couldn't get any flameage happening unfortunately. I thought the driver looked familiar, but I wasn't really sure, and I didn't see him around afterwards otherwise I woulda said hi.
@australianmonstertrucks2 жыл бұрын
@@AussieMonsters-on-KZbin Hope Canberra 2018 is on that list. That was a fun show👌 hahaha yeah we just roll around Australia town to town now with them 😂
@khymanser3912 жыл бұрын
I want to see more Aussie monster trucks
@khymanser3912 жыл бұрын
Is the monster trucks going to Darwin this year or Brisbane
@AussieMonsters-on-Youtube2 жыл бұрын
Don't know about Darwin, but there is an indoor show at Brisbane Entertainment Centre on June 18 & 19. Monster truck mania.
@khymanser3912 жыл бұрын
@@AussieMonsters-on-KZbin what about Bundaberg this year
@khymanser3912 жыл бұрын
@@AussieMonsters-on-KZbin monster truck mania again this year
@khymanser3912 жыл бұрын
Hope the monster trucks will come to Bundaberg this year