Right on. Yea not far at all. While your here make sure you Subscribe!!!

@@BasicBagWurx Done. I’ve always had Mazda’s that laid frame way back in the day ‘89. Lookin to get another one. Wouldn’t mind catching up with you at some point as it’s hard to find people that like mini trucks around here.

@@flmmaz truth. Ive always been the oddball in this area. Lol. Slammed cars and trucks are definitely rare in this area. Shoot me a message sometime and we will get together.

Thanks! I do what I can

@@douggardner5577 thanks dude. Gotta get it to a good point to be able to move it ouside for when your truck shows up. Lol

@@BasicBagWurx it's coming soon buddy best believe im getting my stuff together

@@douggardner5577 Ready for it when you are good sir. Just have to let me know what all you were wanting again, its been a minute since we discussed it.

@BasicBagWurx it gotcha it's back in our messages but we will get it right

@@scottp7744 thanks. Slowly plugging away at it. So much tedious stuff here and it seems like its taking forever. Hoping to be on the other side of the hill with the bed work so i can move on to something else on the truck. Lol

@@Lowpsi yea... the forklift doesnt always want to start. Been fighting that issue for a while now. Thinking its a ground issue somewhere cause it keeps burning out key switches. Plus it doesnt have power steering and there isnt much room at times to get that thing to turn on a dime very well. Lol. Gotta get my new storage system built to help open up some floor space.

@@douggardner5577 slowly but surely... trying anyways. Lol

@@superiorstreetstyles thanks. Working on it. Lol.

@ it always seems there is not enough hours in the day!

@@superiorstreetstyles aint that the truth.

@@douggardner5577 yea. Its going to get the tintable raptor bed liner. Going to have it match the interior and the powdercoat color.

@@BasicBagWurx it will be badass bro keep it up

@@douggardner5577 already got the raptor liner here and ready to go.

For sure! Shoot me a email or a message on Facebook when you are ready!

@@BasicBagWurx Thank you sir.

@@michaelwhite-oi1ft you actually sent me the file for the s10 plate for when i modified these arms. Originally i was trying to lay the truck out on a stock spindle and the plates being flat wasnt working, couldnt get the truck to lay out. There are some other videos showing that issue i had with stock spindles. Once i gave into defeat on using stock spindles i swapped out to some drop spindles and started reworking the plates. Took alot of angle out of them and they worked. But i went ahead and decided to modify them some more, which went back to flat. Other than shaft length is there any difference between the K5108 and K5208 as far as travel goes? I would assume both are still servicable.

#truth Some of the ideas I have in my head for the bed is a small detail and many probably wont even notice. But once you do it will stand out like crazy. Its something that i cant say that i have seen done before.

@BasicBagWurx well get after it buddy you got this keep working 💪 👷‍♀️

@@douggardner5577 trying to. Lol. Mininats is right around the corner.

@BasicBagWurx it won't be long an it will be here for sure

Agree with that for sure.

We try our best anyways. Lol.

Thanks dude. Waiting on the body shop now to start working on it.

@luisreyes-cf1op I am glad we could help get that spark back for you. Minitruckin' is Not Dead. It's definitely making a comeback!!!

@@BasicBagWurx definitely not dead, I started watching Viriginiaislowriders and now you, I used have a Mazda extended cab b2200 back in 1995 orange body dropped now, I just bough a 2011 Tacoma access cab just lowered, put some Lexus 19" wheels on it, btw Maggie Valley was my first Show after 30 years, looking forward to watch all your videos.

@@douggardner5577 trying to get there. Lol. #mininats2025? Lol

@BasicBagWurx you got this bro 100 percent believe in you

@@douggardner5577 we will see. Got your truck coming and this Tahoe as well. They will come first. Lol

@BasicBagWurx I'm sure with you will an determination you got it bro im behind ya 100 percent

@@douggardner5577 appreciate that. Im trying to have the truck painted by mininats as well. Lol

@@Virginiaisforlowriders right. Really debating on changing the ball joint plate angle on the upper arms.

@@BasicBagWurx are they binding ?

@@Virginiaisforlowriders didnt get much of a look last night, but i have a feeling they are at its current max lift.

@scottp7744 Im almost scared to see whats underneath that hard bed cover. Lol.

The beds inside doesn't matter you goin to cut it regardless but I think if you go 4wd front go 4wd all the way around. If not the one not for yours you should go with can always fix dents.

​@@douggardner5577 ill be doing a raised bed floor so in this case it will be seen. So ima have to cut up one of my other excab beds for patch panels.

@GrinderTV they make all the difference in the world. I might go back and add to them later.

@@BasicBagWurx I was eyeing the metal ones but they are super heavy.

@GrinderTV heavy isnt always a bad thing when it comes to wheel jack stands.

@@douggardner5577 thanks dude.

@@jayinmi3706 yes. Its becoming more popular as well. Other than swapping over oil pan, oil pickup tube and windage tray the motor bolts straight in and to the factory mazda transmission. But this is only for the b2000 and b2200.

@@BasicBagWurx Do the B2300 and B2600 use a different engine block or mounts or something? I'm intrigued.

@@jayinmi3706 the b2000 and b2200 use the same pretty much everything. The b2600 was a carbed mitsubishi engine and then the b2600i was a fuel injected mazda engine. The b2300 is a Ford Ranger at that point.

@@BasicBagWurx Thanks!

@@jayinmi3706 not last i checked. Lol. @Virginiaisforlowriders i guess we brothers now. Lol

Yeah man we went to different schools together, lol

The way I made the mount, the carrier bearing sits on top. So I actually made it shorter and then shimmed the carrier bearing to be able to adjust my driveline angle. Once all the fabrication work is complete on the chassis I will once again go back and double check all of my angles to make sure everything is correct from front to back.

@@BasicBagWurx I did something similar when I built the mounts for my trans crossmember. I made it lower than it needed to be so I could space it up to keep driveline angles in check...but it's not bagged or anything. It's just getting a 6.0 and a 4l80E.

@@jayinmi3706 ​if you decide to get a Mazda I recently just posted a transmission crossmember for sale for the mazdas. It allows for more room for exhaust on the bagged trucks.

@@BasicBagWurx I'm 7 years in to my S10, so it'll probably be a while. lol. Mazdas don't pop up around me much anymore.

@@jayinmi3706 i understand that. For my mazda whenever i get the chance to start it its going to be a while. I am having to get my cab from across the water first.

The cab plus bed is actually 1in shorter than the standard cab short bed. But the biggest difference between the beds is the wheel well locations. If I remember correctly, they are like 8in different and the standard cab short bed wheels are centered in the bed. Thanks for jumping over to this channel and make sure to subscribe as we are basically doing the same thing as Crawford over there at Virginia is for Lowriders. We are currently rebuilding the wife's Cab Plus with a few twists.

@@BasicBagWurx I was curious, because it seemed like it would almost be easier to start with a standard cab truck and just rebuild the part of the frame you wanted tto update anyway. But now that I understand the bed difference, I think I see why you're doing what you're doing. Already sub'd. Work looks great!

@@jayinmi3706 Thanks. I didnt want to get to crazy with the wifes truck. But i had a standard cab short bed parts truck that the frame was good on so i just figured out where i needed to cut the frame on it then the location on the cab plus and married the two frames together. So the rear portion of the frame utilizes the rear cab mount from the standard cab short bed, but after putting the cab and bed on the frame we noticed the rear cab mount wasnt tall enough. So we cut the original one off and made a tall one for the cab plus rear cab mounts.

Just sub’d the channel. I’m diggin this direction

@norcallump4857 thanks for subbing.

@@gsxr6bd thanks!

Its getting there slowly... Been fighting nasty weather and sickness that ran through the house.

@virginiaisforlowriders Slow progress but getting there. Hopefully soon we will be back to making huge strides and huge progress on it. Lol