Hi how to confirm valves bend vw timing belt broke
@PLUKI4x43 күн бұрын
Hi you can check your valves with endoscope camera to see if there is any damage. Just put the camera in spark plug hole. But the best thing would be to remove the engine head. But with camera you can see pretty good what is going on.
@europeanpaganismrising20226 күн бұрын
Ova fora sa uljem je super hvala.
@PLUKI4x46 күн бұрын
Drago mi je da sam pomogao 😊
@leonardasmigmator7847 күн бұрын
Thanks!
@PLUKI4x47 күн бұрын
No problem!
@matyasantal67157 күн бұрын
Only just the piston ring? Couldn't a head gasket failure cause this?
@PLUKI4x47 күн бұрын
Ofcourse it can, but before this niva got to me, engine head was rebuild and new head gasket installed so I believe its bad piston rings. This is what I believe its bad with this engine, but on someone else's engine can be bad head gasket.
@matyasantal67157 күн бұрын
Maybe they make a mistake under the repair, but it needed to pull apart. Perhaps the cylinder head renovation was not done properly. When i do the repair in my niva,it was a little dent in the cylinder head and i lost a lot compression
@PLUKI4x47 күн бұрын
Yes could be. Now my friend needs to decide what he is going to do with his niva, if I am going to tear it down I will record it😎
@milosbaranknives47779 күн бұрын
Zdravim ja mam problem alternator dobija je novy celkom ale ke dam svorky na bateriu tak nedobija...kde moze byt problem?
@PLUKI4x48 күн бұрын
Check all the wires that goes to the alternator, check if your jump wire good. But sadly some times new parts are bad from factory.
@MarkusNuorala20 күн бұрын
Hey Pluki!🤝 what tire in this vaz?
@PLUKI4x420 күн бұрын
Tires in this video are BFGoodrich Mud Terrain TA KM2 215/75 R15
@europeanpaganismrising202221 күн бұрын
N̈amam reči majstor sam takav.
@PLUKI4x420 күн бұрын
😎
@shrekulous375321 күн бұрын
only in a Lada can you use any parts you find and have it work perfectly
@PLUKI4x421 күн бұрын
You are absolutly right my friend, that is way I love my lada🤗
@leonardasmigmator78421 күн бұрын
Great video 😊
@PLUKI4x421 күн бұрын
Thank you!!
@derphilipp536923 күн бұрын
I'm planning to put the 21214 Niva engine in my Lada 2101 from 1978. It does not have electric fan for cooling. What should I do? Use a fan from 2105? Any idea?
@PLUKI4x423 күн бұрын
You are right, just use the fan from 2105 or 2107, In my videos I will do some work to make realy good electric fan wiring but first I need to finish bodywork, there are some awesome videos on yt on how to connect your electric fan. Easiest thing to do is to put 2105 fan. Wish you a good luck!
@derphilipp536923 күн бұрын
@@PLUKI4x4 thank you very much!
@PLUKI4x423 күн бұрын
No problem 🤗
@alenbitici991923 күн бұрын
U 18:15
@alenbitici991923 күн бұрын
13.10.2024
@alenbitici991923 күн бұрын
Ja sam te vidio
@PLUKI4x423 күн бұрын
Danas se malo vozikao po gradu😁
@PHRtv24 күн бұрын
Hi Pluki, love the videos! What tool and dimensions did you use to unscrew the oil pan drain plug? Keep the videos coming!!!
@PLUKI4x424 күн бұрын
Hi, you need to use Hexagon 12mm tool. Thank you so much I will!
@davidlongworth175526 күн бұрын
I like the dark red. Just asking is that the texture you wanted. I am no car painter but isn't that what they call orange peel as in not a fine smooth finish? Apart from that your presentation videos are very helpful. Keep doing them.
@PLUKI4x426 күн бұрын
Thank you! This is special color with that ruff finish, you can google Raptor paint to see car like that, orange peel is when you paint clear coat on normal paint job, I didn't put clear cout on my niva. Thank you so much for your comment!
@alfonsotartaglia708627 күн бұрын
Great content mate
@PLUKI4x427 күн бұрын
Thank you so much!
@alfonsotartaglia708627 күн бұрын
Hello mate! I think that this is the right direction for your channel. People want to learn how to work on their Niva and you are a great teacher! please do more videos especially on general maintenance! thank you and keep up with the good work
@PLUKI4x427 күн бұрын
Thank you so much mate! I have about 10 more video ideas at the moment on how to maintain and fix your niva, I just need to record it😁
@niva1608Ай бұрын
koja je razlika sa ovim nosacem nesto mi se cini u blato i snijeg da bi glavio u to ?
@PLUKI4x4Ай бұрын
Iskreno imao sam to na staroj nivi, i dalje najniže točke su diferencijali, tako da ako baš nije netko strmo brdo i odmah strma nizbrdica neces strugati sa time
@niva1608Ай бұрын
@@PLUKI4x4 a reci mi da li je bas osjetno smanjena vibracija i brujanje?
@PLUKI4x4Ай бұрын
instalirao na jedno 5 niva barem i stvarno se osjeti ako se napravi i poštela kako treba, ja na svoju sigurno vraćam, govorim o ovoj nivi koju potpuno restauriram, a na daily nivu neću staviti zbog vremena i novaca inaće definitivno bi. Smanjuje se dosta vibracija brujenje ne toliko
@niva1608Ай бұрын
@@PLUKI4x4 pravim i ja jednu sve iznova pa zato pitam hvala na informacijama
@niva1608Ай бұрын
@@PLUKI4x4 i jos jedno pitanje da li je skupo i tesko ugraditi servo na nivu 1.7 karburator ?
@Ivan-L.Ай бұрын
Great work mate :) Can you provide a link from where you bought ist? Thanks in advance and greetings from Bosnia :)
@PLUKI4x4Ай бұрын
Sorry I tought I put it... here it is ladapower.com/catalog/transfer-case-2/lada-niva-transfer-case-3-point-support-with-guard-t-sphera-detail Greetings from Croatia ;)
@leonardasmigmator784Ай бұрын
Thanks for showing us 💪
@PLUKI4x4Ай бұрын
No problem 😁
@orangek5Ай бұрын
got one too but also my gearbox is on the frame, so no sepperate support anymore for the gearbox.
@PLUKI4x4Ай бұрын
That is awsome!!!
@freedoompictures6839Ай бұрын
I did this mod to my 2018 Niva and since then driving the car is much more comfortable compared to factory. Beyond comfort one more disadvantage of factory transfer case arrangement is that it exposes a small area of the monocoque chassis to highly focused vibrations. This causes metal fatigue in a small area which becomes prone to rust and decay development much quicker than it should. So you do this mod, and make sure to use protective coating like teroson or similar to the modified area, then you're actually in a better situation in terms of rust protection for your car.
@PLUKI4x4Ай бұрын
Everything you just said I 100% agree with you!
@buongiornosanpietro691125 күн бұрын
hi, i'm about to install this modification, can you tell me exactly which part is most exposed to corrosion? so i understand and follow your advice. thanks
@PLUKI4x425 күн бұрын
The part where transfer case mounts original are, just clean good with wire brush and protect it. Wish you a good luck with installation.
@buongiornosanpietro691125 күн бұрын
@@PLUKI4x4 thank you 😊
@niva1608Ай бұрын
Da li si na nivu dodavao ispod grede uz one i ojacavao ono dje se uporne spone kace i naprijed ?Radim jednu citavuod nule pa nemam ideju kako da je ojacam da ne postoji sansa u slucaju da me povuce neko iz snjega da izleti pola nje kao sto se desava 😂
@PLUKI4x4Ай бұрын
Nisam nikada tamo ojacavao ali cupali me iz svega nikada nije bilo problema, samo dobro sve složi i ukloni hrđu, a za ojacanje najbolja dodaj jos 2mm lima pa si miran
@niva1608Ай бұрын
@@PLUKI4x4 a sta mislis ima li potrebe da dodam kutije metalne one kao sto ima ispod .Lada je zdrava bas nidje ispod rdje nema .To je ova crvena ima je na you tub u short na moj kanal
@PLUKI4x4Ай бұрын
Nikada to nije lose napravit
@matyasantal6715Ай бұрын
Finally, it's makin a shape 🎉
@PLUKI4x4Ай бұрын
Yeah! Its going to be awesome!!!!
@anahorvat4036Ай бұрын
Keep it up man 👌
@PLUKI4x4Ай бұрын
Thanks!
@leonardasmigmator784Ай бұрын
Great video 😊
@PLUKI4x4Ай бұрын
Thank you!!
@dronephotography-by-JerkoАй бұрын
Samo naprijed Lada Freak,..... great video, need lot of time to do it
@PLUKI4x4Ай бұрын
Thank you!!! Cant wait to drive it😎😎
@europeanpaganismrising2022Ай бұрын
Kaj bu 4x4 ili bu zadnji pogon.
@PLUKI4x4Ай бұрын
Zadnji samo motor pripasujem, treba mi nešto za svaki dan jer se u nivi uvijek vozim, i dosta mi😅
@dronephotography-by-JerkoАй бұрын
@@PLUKI4x4 hahahaahahah
@PLUKI4x4Ай бұрын
@@dronephotography-by-Jerko 😂
@paulwalker427Ай бұрын
great video
@PLUKI4x4Ай бұрын
Thank you!!
@wouterschindler1421Ай бұрын
Lada god
@PLUKI4x4Ай бұрын
Thank you!!
@WaplogLuisiАй бұрын
I have a public of almost 10 k people waiting to see guides and step by steps but for Ladas. Improvements , and such.,.
@PLUKI4x4Ай бұрын
Cool!
@WaplogLuisiАй бұрын
Hey my friend good videos. I need a Lada engine bro! How can I get one ...those are strong engines
@PLUKI4x4Ай бұрын
Thank you! Well that is up to you, try ebay or try to find it locally
@WaplogLuisiАй бұрын
@@PLUKI4x4 Is for Cuba bro
@alexanderpeche6404Ай бұрын
Thank you!!!!! You encouraged me to do it for myself and I got it 💪
@PLUKI4x4Ай бұрын
That is awsome!!! Glad I can help you🤗
@farkashfaloop1854Ай бұрын
Another helpful video! In my Lada Niva the Cool steam tank (6:42 in the video in the down right corner) is full with black dirt. what to do?
@PLUKI4x4Ай бұрын
I would flush your coolant, maybe remove and wash your radiator, and if its time you can replace thermostat, water pump and hoses, just be sure to clean everything
@europeanpaganismrising20222 ай бұрын
Provjeri gumu od hardijevog zgloba taman joj je vrjeme za zamjenu.hoće lagano popucat košta 20eura ak pukne može šteta bit preko 100eu. Ak buš mjenjao otpusri kardan i mjenjač metneš nutra .lim na gumi se miče kad je sve namješteno.pozz.
@PLUKI4x42 ай бұрын
E bravo!!! Uskoro ću ju mjenjati zaboravio napomenuti u videu, hvala puno na komentaru!!
@freedoompictures68392 ай бұрын
It'll be good to check if you installed the air filter in correct orientation. There should be an arrow sign at the base of the air filter housing that points to the direction air filter's leaves should run parallel to. Yours seemed wrong orientation to me. Not the end of the world to install wrongly, but in the end it might have an effect on the air flow and dirt disposition.
@PLUKI4x42 ай бұрын
Thank you, I am pretty sure I did how you said it needs to go but I will check to be sure. Awesome tip I forgot to mention!
@TheVcasf2 ай бұрын
Hi. My 2009 Niva lost it's power after an engine change. It drives "ok", yet accelerating from a stop on a hill is impossible without low gear. It just dies. With low gear it jumps just fine. Does anyone know what it might be? I changed everything i can think of. Changed spark plugs, all oils, belts etc. No codes from OBD scanner. Did a catalytic converter delete.
@PLUKI4x42 ай бұрын
Hi, it can be a lot of isuse, maybe feul pump, maybe distributor, or new engine isnt built right, sadly I cant help you a lot but I would first check feul if this was my car
@TheVcasf2 ай бұрын
@@PLUKI4x4 Thank you for your reply and your great videos. Amazing. So I checked the fuel filter and the car doesn't have any symptoms of fuel pump. I might be wrong. but it drives well once moving. Very strange.
@PLUKI4x42 ай бұрын
Thank you for your comments! Its really weird but probbaly then its something with sensors or distributor if we assume your new engine is in good shape, do you have any problems in driving or just when you are on a hill?
@TheVcasf2 ай бұрын
@@PLUKI4x4 It only happens accelerating uphill. But I guess it must have lost power overall. but up hill is impossible without riding the clutch or low gear. I've tried everything and might decide to just change the engine again, even though it sounds good and good compression. Thanks again for your time
@PLUKI4x42 ай бұрын
@@TheVcasf I would check timing before pulling the engine out
@shrekulous37532 ай бұрын
Power steering and AC? Will it even be a Lada anymore?
@PLUKI4x42 ай бұрын
It's going to be a ladamobile😎 if I find all the parts for AC, I cant remember where I put it😅
@TheVcasf2 ай бұрын
Thank you
@PLUKI4x42 ай бұрын
Always here to help
@farkashfaloop18542 ай бұрын
Love your channel! are you getting the parts online or locally?
@PLUKI4x42 ай бұрын
Thank you so much!! Most of the parts I get locally but aftermarket parts I got online
@publicdomain94002 ай бұрын
What brand of ac is your niva equipped with ?
@PLUKI4x42 ай бұрын
I really don't know, I bought it with ac
@publicdomain94002 ай бұрын
@@PLUKI4x4 I have a very similar one and it's a diavia that's why I asked
@ByDemonsBeDriven3 ай бұрын
Upgrading klimu! Vifis da je globalno zatopljenje u djiru. ;)
@PLUKI4x43 ай бұрын
Baš tako i ja razmišljam bude išla klima unutra 😅😁
@leonardwagstaff13633 ай бұрын
I have A/C in my Niva, although we don't have that many hot days in the UK it's a blessing on the days when it is hot, plus it's great to quickly demist windows, so I say as you have pretty much everything you need do it🙂.
@PLUKI4x43 ай бұрын
Yeah, this is starting to be a biger project than I thought, so I will probably install A/C, I have A/C from niva but I will modify it for lada 2107
@MrUberjan3 ай бұрын
AC niva!? Was it hard to install?
@PLUKI4x43 ай бұрын
I bought it with A/C, but it can really be pain in the... to install it
@leonardasmigmator7843 ай бұрын
Welcome back🎉
@PLUKI4x43 ай бұрын
Thank you 🤗🤗
@matyasantal67153 ай бұрын
Well, finally🎉
@PLUKI4x43 ай бұрын
Sorry for not uploading I was crazy busy with work. I will go back now to posting new video every two weeks. Thank you for your comment!
@Random-nf7qb3 ай бұрын
Why not port the 2105 head and make it accept the fuel injectors? The belt 2105 engine runs a lot quieter and smoother.
@PLUKI4x43 ай бұрын
In my country its a lot easier to find parts for 1.7i then any other engine, and 1.7i engine you can find here for cheap. That is the main reason because I want to make this car my daily drive so its important to me that I can fined parts easy and for cheap.
@FluxPod20243 ай бұрын
Keep going good work bro !
@PLUKI4x43 ай бұрын
Thank you so much!!!
@mpeg20003 ай бұрын
Appreciate you doing these videos in english brother! 👍🏻 Quick question. In the last year my lada didn't start 3 times. Everytime it started again after i hit the starter with a hammer. No problems after that untill a few months later when it happened again. Is this normal and i should just have a hammer ready or is this a sign that i will need to replace the starter? Thanks in advance!
@PLUKI4x43 ай бұрын
At some point in the future starter will fail, but that can be really a lottery, it can fail tommorow or for a year. Thank you so much for your comment 😁 p.s. First thing I would do is clean contacts on the starter motor
@niva16083 ай бұрын
sta je sa proektima kako napredujes
@PLUKI4x43 ай бұрын
Ogromna gužva sa poslom bila, ide novi video ne ovaj utorak nego idući pa opet idu videii svaka dva tjedna 😎
@brentjoubert-fr1tu4 ай бұрын
Hey man! Thanks very much for your awesome channel! Your suggestion worked perfectly and I now have a working heater in my NIVA! 😀