3 ай бұрын
4 ай бұрын
5 ай бұрын
5 ай бұрын
5 ай бұрын
7 ай бұрын
Пікірлер
@ALionlikeMane Күн бұрын
Okay but i wanna know what's on the FRONT of your quest to give it a darker look
@Verociity 22 сағат бұрын
It's a car heat wrap but it was very difficult to install, it would be way easier to buy a skin/vinyl made for Quest3 instead. I only bought the heat wrap as I wanted a complete seal.
@darwinyaa Күн бұрын
Efekt ile yapan koca yürekli insan
@cyrussarkine8998 3 күн бұрын
so sick
@GUNNERBASS 5 күн бұрын
Wanted to give an update, I got the Globular Cluster halo strap and facial interface. They only ship 3 pads with the facial interface and they’re all too thin. So what I did was grab the pads off my Quest 2 VR Cover interface. They work suspiciously well almost as if it’s the same design 😂. A little tricky to get it to all fit with the thickest VR Cover pad, but the medium one fits 100%. Ill probably see if GC will send me the thicker pads for free, but thr VR Cover pads totally work! Now I just have to decide if I want to keep the KCBOVR interface. The magnetic swap out is just too nice of a feature for so many reasons!
@Verociity 4 күн бұрын
Is the Q2 VR cover thicker than usual? I also noticed the PU leather pad on the Globular F3 seemed a bit less dense than usual, however that was my least favourite interface. I plan on trying the KKCOBVR interface soon though. Do you have any photos of your facial interface setup?
@chaosordeal294 5 күн бұрын
If you like this, consider trying the VR games Tentacular and A Shopping Trip to Eklan Tor.
@Verociity 5 күн бұрын
Eklan Tor is a game I completely forgot about, I played it years ago and it was the first diorama I experienced in VR. I'm surprised anyone still remembers that game,
@TommyKennedy2012 7 күн бұрын
Okay, This Was Cool 🤘
@alexduong5385 7 күн бұрын
Where did you get that blue outside
@Verociity 7 күн бұрын
It's a car heat wrap but it's much easier buying one made specifically for Quest so you can just slap it on.
@alexduong5385 6 күн бұрын
@@Verociityoh thanks
@Queen.Laqueefah 8 күн бұрын
So cool!
@fatahkent 8 күн бұрын
Ayo this game actually looks really sick also I see those AoT posters 👀👀👀
@Verociity 7 күн бұрын
I have been exposed 👁️👄👁️💧 It's definitely a more unique use of mixed reality.
@Juandavid107-d6t 10 күн бұрын
🎉🎉🎉
@saltrujillo89 10 күн бұрын
Recently bought the H4, can anyone tell me if it's OK to leave it plugged into the Quest 3's charging port? I've had it for a little over a week now but I've been unplugging the head strap from the headset every night before bed.
@Verociity 7 күн бұрын
It's recommended to unplug it for long periods.
@Jxkecuh 12 күн бұрын
Finally found someone playing with the chainsaws insstead of the default swords 🙌
@Verociity 12 күн бұрын
Playing this song with anything else would be an injustice. I always try to use the appropriate sabers, platforms and colours for every video.
@RexBanana 15 күн бұрын
How talented!
@Misteyvalorant 16 күн бұрын
Cuz I am wondering witch one to get
@Misteyvalorant 16 күн бұрын
Witch is better onward or extractors
@Verociity 16 күн бұрын
Do you mean Contractors? It depends what you want, milsim for Onward if you want something more realistic, or Contractors for faster pace games like CoD, it also has way more mods so that makes a big difference.
@Stoat_Lord 16 күн бұрын
Not impressed with the AMVR V3, it doesn't fit small faces very well, leading to light leakage from the sides and the removable padding is too long to properly fit on the interface itself, causing it to bunch up and create outward facing folds that leave lines on your forehead which take a while to go away. If they could just make the padding the proper length, thickness and shape, then neither of what I mentioned would be a problem.
@Verociity 11 күн бұрын
Their Q2 interface came with additional side cushions for those who had this problem, maybe you could do something similar with this, but for me it's been a perfect fit. The padding is also a bit creased for me too but it's been a minor problem, however I've asked them about this so hopefully they can create a proper fit because it can be annoying.
@ErrorAsh 19 күн бұрын
Holy shit, so good. I can barely keep up on hard :D Some questions: What are those swords? How did you get the music video in the background? And how do you spin around the sabers so quickly? And it seems like your Beat Saber has a few more special effects than mine either. Are these all mods you can download with ModAssistant?
@Verociity 17 күн бұрын
I forgot the name but you can find the saber on modelsaber.com. I'm using cinema mod and trick saber (with saber factory) which you can get on mod assistant. The chroma lights are from the map, you'll also need chroma for it to display.
@Verociity 19 күн бұрын
I'm playing the SteamVR version on a Quest3, however the game is launching a standalone Quest3 version this year, no release date yet though.
@danielbonder2545 19 күн бұрын
I love dmx❤ My favorite is DMX ruff Riders national anthem
@Verociity 19 күн бұрын
@danielbonder2545 that one goes way back. I just realised it's been 3 years since, RIP.
@beauuaebeau 19 күн бұрын
🔥🔥
@Dyl3423 20 күн бұрын
i was having issues with the shipping address then i saw the Maecker VR interface page says they only ship to japan and australia:(
@Verociity 19 күн бұрын
@@Dyl3423 I didn't realise they only ship to those countries, I was sure they shipped international. What made you decide on the Maecker over the other interfaces?
@Dyl3423 19 күн бұрын
@@Verociitywell your recommendation lol. AMVR seems a little too pricey and KIWI is out of stock. I think I’ll just wait for Kiwi to restock or fingers crossed it’s available in more countries
@Verociity 19 күн бұрын
@@Dyl3423 the Kiwi is the same price as the AMVR, however there's also nothing wrong with the Maecker. I think the AMVR version is totally worth $10 more though, it's the most comfortable and also comes with both PU leather and ice silk gel covers.
@BuwnyCinnamon 20 күн бұрын
Can the AMVR v3 be adjusted at an angle so the top is closer to the face than the bottom? Kinda how the v2 can be adjusted independently on the 4 sides but you adjust on medium on the tops and high on the bottom sides.
@Verociity 19 күн бұрын
@@BuwnyCinnamon unfortunately the Q3FC3 only has bottom adjustment, I didn't realise people wanted to adjust the bottom and top separately. That's one advantage the V2 has and it's still a great interface, the v3 isn't a huge upgrade.
@BuwnyCinnamon 19 күн бұрын
@@Verociity edited: v3 will adjust all 4 at the same time, only the v2 can adjust adjust the bottom and top separately
@Eagledocstew 20 күн бұрын
You should try a custom-made interface, the Oblik. It’s expensive, but because it’s custom made it fits your face like a glove and is the most comfortable interface
@Verociity 19 күн бұрын
@@Eagledocstew I was curious about that but I was already happy with the AMVR v2 that I couldn't see any reason to get the Oblik, especially with the higher cost. The v3 also has a gel layer in the cushion so it's even closer now. What advantage(s) am I missing on the Oblik?
@Eagledocstew 19 күн бұрын
@@Verociity custom made, comfortable, best FOV, compatable with most charging docks, and can choose the color of the interface and gel.
@stevee6305 21 күн бұрын
can i get the newest one AMVR one from amazon? i like the idea of the dial buttons
@cleanbleh 20 күн бұрын
Be careful, I recently ordered one from Amazon but when it came it was the V2 not the V3. I had to order the V3 straight from the AMVR website as I couldn’t find the V3 on Amazon
@Verociity 17 күн бұрын
From what I've heard Amazon only has the old V2 interface, but if you buy direct from AMVR they only sell v3.
@theklown8820 25 күн бұрын
I think this games just need a violence update like liveleak vr and this game would be sick
@Verociity 25 күн бұрын
Do you mean more gore and blood? I think they want to keep it clean and tactical, but that would be a good option.
@thehaeggarr1625 27 күн бұрын
I tried the globular cluster, meta Silikon and the amvr v3. Actually the stock quest 3 one is not to bad for me. But amvr is the best of the lot.. It's sad, that vrcover is not really in the Game anymore
@Verociity 26 күн бұрын
The stock interface was the worst I've ever used across every headset, it's very rough and narrow, plus the nose gap is huge. I've never tried VRcover but haven't had any reason to as these have all worked great for me.
@GUNNERBASS 27 күн бұрын
Tried the newest AMVR and didn’t like it. The eye distance knobs didn’t really work that great and I have no glasses and want it on the closest setting anyway. Wouldn’t ever use it more than once. It was also too wide for my head and I had alot of light leak from the sides. Right now I have the KKCOBVR K3. I didn’t like the stock pad, so I grabbed a pad from my old VR Cover headset. It works and blocks all light, and the fan is great, but I’m starting to notice pressure on my sinuses. It may also be the ANNAPRO A3 halo strap causing the pressure. It’s an awful headstrap all around and the battery has been a disaster, constant disconnects and the Quest 3 says the power delivery is wrong. I’m returning that and trying both Globulus cluster offerings, halo strap and facial interface. I hope the combination is a winner. Being able to take off the interface easily will be an amazing feature for AR and to keep the headset and interface clean. Hopefully it works well!
@Verociity 26 күн бұрын
How effective is the KKCOBVR K3 fan? I've heard the Bobo S3 pro fan is terrible, so I'm a bit reluctant to try the K3 and worry they'd add unnecessary weight (I try to keep my headset as light as possible). I also received the Annapro A3 halo which was one of the worst I've ever used, in fact it was the first time I decided not to review. The problem is the side panels prevent it from sliding forward so the halo is way too far back which prevents you from getting close to the headset and reduces FOV. I explained everything but they never replied. It's a shame because their Elite strap was the best I ever tried, so it's a shame they dropped the ball with their halo. You'll be very happy with the Globular Cluster CMQ3 though, that is the best I've ever use. I was disappointed their facial interface wasn't quite comfortable as they put a lot of attention to detail in the F3, it's still great though but I still prefer the AMVR Q3FC3.
@GUNNERBASS 26 күн бұрын
@@VerociityKKCOBVR fan is actually pretty great. I only use it for maybe 30 seconds at a clip though b/c if you leave it on continuously your eyes can get really dry. It’s great otherwise. I liked it better than the AMVR but want to see how it feels with the GC halo strap before I commit. I just wish VR cover would come out with their Q3 facial interface already
@TrevorGryffyn 27 күн бұрын
Aw man.. I have a Globular on order (shipped) but based on this review, I might return it. You mentioned cheekbones.. with my stock Quest 2 facial interface, I have no problems. With the stock Quest 3 facial interface, I find it presses on my cheekbones in an uncomfortable way. I thought I had read people saying that the Globular was better for that, but now I se eyou mention that you didn't have the issue with the others but did with the Globular? I'm not picky, at all, with facial interfaces (hence the stock Quest 2 and 3.. and I've owned the 3 since it came out and still haven't replaced the interface til now). Is there one you'd recommend specifically for the cheekbone issue or just "any of these minus the Globular"? ha Thanks! Good reviews are always welcome.
@Verociity 26 күн бұрын
Unfortunately despite how much attention to detail they put in the F3 I just didn't find it as comfortable compared to the others, it's a shame because their halo strap (CMQ3) is literally perfect to me, way beyond anything else I've used. The F3 is still very usable and does have advantages over the others, but the comfort isn't as great so that's why I was hesitant to recommend it. All I can do is explain all the pros/cons and let people decide which is best for them as we all have our own preferences.
@loner.stoner-210 28 күн бұрын
how did you even edit it like that.. xDD How isnt this viral
@Verociity 27 күн бұрын
I used LIV on SteamVR. It's hard work going viral, just gotta grind it out.
@V8chump 28 күн бұрын
I hate that this level is 15 square feet…
@Verociity 28 күн бұрын
It's smaller than the original map, the claustrophobia really gets to me, but it also forces you to stay alert of your surroundings.
@tiorontoron7531 28 күн бұрын
so far the best facial interface is no facial interface. the FOV is increase is so crazy i really feel ripped off by these interfaces. the only problem is having light leak, and if the edges near the nose can hurt a bit but its like the only way i watch movies or tv shows in quest now. if i am gaming i prefer no light leak so i put the interface back on, but im trying to find ways to block the light and add a slight bit of cushion because the FOV is so much better.
@Verociity 28 күн бұрын
No interface is great for mixed reality as it blends in with your surroundings, but for VR it breaks immersion which defeats the purpose. A great strap I've found for this is the Kiwi Design H4 as it can adjust the height/depth of the headset. My main goal is also to get the max FOV, in fact I used the frankenfov mod (cushion without interface) on the Quest2 for years, but the Quest3 is SO compact that most interfaces now get my eyelashes right up to the lenses. As someone who went to great lengths to mod interfaces over the years I can honestly say these new interfaces make modding obsolete. This is what I wished for on the Quest2 and is why I stress how much better the FOV is now with these interfaces compared to the stock.
@tiorontoron7531 28 күн бұрын
@@Verociity i dont know how you can be immersed with 12lbs of vr headset on the head. im close to figuring out a frankenfov mod for it similar to my hb reverb g2 with the samsung odyssey cushion, but i cant get it to fit just right, but im close. i use lens protectors anyway so im not worried about my eyelashes
@_nom_ 28 күн бұрын
No, the AMVR is the best. Your eyelashes practically touch the lenses
@Verociity 28 күн бұрын
I also used the frankenfov on the Reverb G2 for years which worked great on that headset but on the Quest3 it's unnecessary. Before the AMVR released I tried multiple cushions (including the Oddyssey) but it's just way too small to work on Q3. The AMVR v3 or any of these interfaces get an even better result, not to mention it saves a lot of time, hassle and maintenance.
@garygohmusic 28 күн бұрын
Thanks! This was really helpful
@Verociity 28 күн бұрын
Glad you learned what you needed.
@rayanelrayes608 29 күн бұрын
Which would you recommend for the BoboVR S3 Pro strap? I heard loads of issues with compatibility
@Verociity 29 күн бұрын
I don't have the S3 pro but I've read it's compatible, I linked a photo in the description. In my previous AMVR review I also demonstrate this with a different halo strap where I flip the mounts in reverse to get it even closer, raising the halo pad is also an option. All the comments also say it's compatible with their M3 which is basically the same size as the S3. Here's the previous AMVR review if you want to learn more about compatibility: kzbin.info/www/bejne/ZmGci2SsobR_oK8 If you're still concerned then the Kiwi and MaeckerVR are standard size so they'll work fine as they leave plenty of space.
@SpritiGM Ай бұрын
Very good quality, nice music, good game presentation. I don't see anything to change. More please.
@Verociity Ай бұрын
Thanks for the feedback. I'll be posting more reviews soon as I'm reviewing some Quest games now.
@nicolecarroll7170 Ай бұрын
BRO I WAS IN THIS SERVER IM THE GUY THAT REVIVED THE GUY BY THE DOOR!!!!!
@Verociity Ай бұрын
Haha glad you finally found it a year later, I was trying to tag you guys but couldn't find you.
@GOROSSI46 Ай бұрын
Hi there, so it’s called Kiwi, is it sold here in NZ? Or is it a company overseas
@Verociity Ай бұрын
It's only sold on their website overseas but shipping is free to NZ. You can also use my code VRCT for a discount: bit.ly/KiwiH4
@GOROSSI46 Ай бұрын
Cheers mate
@MarcelloTrigo Ай бұрын
My favorite scenario
@Verociity Ай бұрын
The best Endless level, I just wish there were more of these as it's been years.
@jtellinem Ай бұрын
the outfit switch and throwing the blades is so mf cool
@Verociity Ай бұрын
@@jtellinem I only did a 2nd take without the jacket as it was too hot, but I didn't know which take to use so I ended up using both 😅 I'm practicing the Black Parade now, MCR never dies.
@Thecrazedbrick187 Ай бұрын
I love this game
@Verociity Ай бұрын
It still needs some work but so far there's a decent CQB game here.
@Thecrazedbrick187 Ай бұрын
@@Verociity oh yeah 100% needs work but I’m pretty sure it’s still in development and so far I love I do play milsims like onward Pavlov tactical assault be an this
@Verociity Ай бұрын
I haven't tried Tactical Assault yet, how does it compare to onward?
@Thecrazedbrick187 Ай бұрын
@@VerociityTA (tactical assault) is more cqb but less attachments and gear but it is fun graphics are low though
@thrill44708 Ай бұрын
How are you playing with like no room i need like the entire living room😭🙏
@Verociity Ай бұрын
@@thrill44708 my play space is a about 3x3m so I can take a few steps around, great for a game like Superhot. Roomscale games used to be way more common in 2017.
@maxcherry8823 Ай бұрын
That looks super hard
@Verociity Ай бұрын
Fitbeat is super hard but super satisfying
@maxcherry8823 20 күн бұрын
Looks like it@@Verociity
@PrinceLouieChy Ай бұрын
A a a a a a a a
@Moles6910 Ай бұрын
Epic
@michaelgonda2125 Ай бұрын
It's apt
@Verociity Ай бұрын
uh huh uh huh
@Thescottishguy1 Ай бұрын
Mate do u know when it will come out on quest 3s and 3
@Verociity Ай бұрын
They've only announced it'll be out in 2025 but no date yet: store.steampowered.com/news/app/1294760/view/4702410905651014113
@anaromero9492 2 сағат бұрын
@@Verociity are you joking because I’ve always wanted to play this game but I can’t afford a PC right now so are you being for real?
@Verociity 2 сағат бұрын
Yea check the link for the announcement. You should still get a PC one day though, PCVR will always beat Quest games.
@anaromero9492 2 сағат бұрын
@@Verociity ok I’ll try to save up enough money
@Verociity Сағат бұрын
Now that the new AMD cpus and RTX GPUs just released a lot of people are selling their old hardware, it's a great time to upgrade, I just upgraded myself after 5 years.
@Charliesbridgman13 Ай бұрын
How hard was it?
@Verociity Ай бұрын
Aside from the face notes it wasn't too hard.
@Mrmuffin524 Ай бұрын
Loved it
@Verociity Ай бұрын
glad it was fun to watch
@Viper6-l3j Ай бұрын
Pure realism
@jaxon258 Ай бұрын
can the quest reverse charge the battery on the headstrap? for example if i charge my headset on the charging stand will it also top up the headstrap after the quest is fully charged?
@Verociity Ай бұрын
It depends on the charger that comes with your charging dock. The Kiwi charger charges both simultaneously, but I think a charging dock will charge the headset then headstrap after because the Quest3 only outputs once it's done charging itself, whereas the H4/K4 batteries can do both.
@JmFLAK815Gaming Ай бұрын
Awesome. Great job!
@Verociity Ай бұрын
Thanks for checking it out. Gotta play more of this game soon.