Jason Lefevers

Пікірлер

@davidthomas7555 8 күн бұрын

I got theses 2 yrs ago as old man bindings as my knees dont like the old style. Being able to step in flip the lever and go is great.

@thanosvasilis Ай бұрын

Hi, i have a question,replacement of head gasket can increase the cmpression?

@JasonLefevers Ай бұрын

If you have a hole in your current head gasket or it’s not sealing like it should which is causing a leak in compression then yes, a new one would increase compression.

@thanosvasilis Ай бұрын

@@JasonLefevers Thanks!

@milton.w Ай бұрын

Hey! What size are the bindings and boots? And have you tried them on a slope yet? Did they feel tight enough?

@JasonLefevers Ай бұрын

My boots are size 11’s and I use the XL bindings. I used them all last season and once this season so far. Love them.

@milton.w Ай бұрын

@@JasonLefeversgreat! Just received mine in xls and my boots are us 10.5 (street shoes 11), was afraid that the bindings where going to be too big, but this made me more confident in my choice of the xls!

@iwannaapple7190 Ай бұрын

That looks like its easier to use than the Kreg version. And cheaper!

@JasonLefevers Ай бұрын

I looked at the new Kreg jig which is basically a rebranded Jessem jig. Never used either but just by looking at both this seems to be way easier to use.

@bongo0042 Ай бұрын

This is the only video on YT that shows an easy and quick way to test a choke solenoid. Thanks.

@Jay58649 2 ай бұрын

I have a mean machines scorpion with a tecumseh motor turn choke off and it runs full throttle with out touching the gas pedal

@AdamsLeatherWorks 2 ай бұрын

Okay, that’s pretty slick. I have a build coming up that would really benefit from this.

@cire9984 2 ай бұрын

To be honest that looks pretty sketchy with the router bit being exposed so close to your hand while you're pushing both on the tool and with your hand. If you do that on an unstable assembly you risk losing a finger and if you clamp it down every time there's a million jigs already out there doing basically the same thing.

@JasonLefevers 2 ай бұрын

I had the same fear initially, but after using it, it’s super stable and not a concern I have anymore. It’s like any other power tool that can be dangerous if not used properly. I’m way more fearful when using a table saw versus this jig.

@BellaFiducia 3 ай бұрын

Great video thanks. Have you ever replaced the tt motor on an early (‘06) etec? I guess it’s a similar procedure? I don’t suppose you have a video on it? Thanks

@JasonLefevers 2 ай бұрын

@@BellaFiducia unfortunately I haven’t, but most are very similar.

@MuhammadNurFitri-k4v 3 ай бұрын

Can i ask, is it can use any type of ATF fluid? Is it can use car atf fluid?

@SoLDMG 3 ай бұрын

A good guess would be Dexron ATF.

@edwardhowe6336 3 ай бұрын

Dude you didnt even show us where the lines go. Partucularly the vacume line. No thanks for the advice i thought you were going to give

@JasonLefevers 3 ай бұрын

Read the description and stop complaining

@chrismccartney8668 4 ай бұрын

Thermostat is not an overheat alarm it opens and closes to allow quick warm up .

@lynchs4205 4 ай бұрын

Thank you so much

@kurtisq9163 4 ай бұрын

Awesome! Just what i needed today. I'm at the same place with the same motor. I want to convert my fuel pump the same way. Thanks for Sharing!!

@jm-ve8ry 4 ай бұрын

I noticed on port side tyou have the temp alarm brown wire, zip tied to your spark plug wire. The manual recomends spacing them as far apart as possible. High voltage can trigger SLOW mode. Trust me its a pain when that kicks in.

@ericbullock3188 5 ай бұрын

should read 5.5 ohm + - 1.5 =

@Boatfisherz1 6 ай бұрын

wonder if this is the same as a 70hp 2000?

@DavidStringer-vw2xx 6 ай бұрын

How would eliminate the vapor separator on a 96 model

@iroc2019 6 ай бұрын

If you have two carburetors this pump only has one outlet. Will it work for two

@boxleyflippinout4833 7 ай бұрын

I wanna know how a video showing fuel dripping from a carb gets 19k views! 🤣

@playedtv7549 8 ай бұрын

Hard with the bottom alternator bolts no room to bang it on

@scn102 8 ай бұрын

Will this pump be good for A 1984 235hp v6? To lean ?? Ty

@JasonLefevers 8 ай бұрын

Nope, I don’t believe this pump replacement pushes enough fuel for motors in that high of an HP range. There are some after market pumps you can Google for that range I believe.

@giloquendo 8 ай бұрын

Ther is a an area with 2 holes and a bolt on the middle that's the vacuum hole remove that bolt and the pump will fit right on it

@hondoe3442 9 ай бұрын

Thank you

@r.seaboats6666 9 ай бұрын

So I have an urgent question These pumps come with a gasket And there's a small peep hole down the center Am I supposed to block that off? Because it seems like the pulse line can blow right thru it Which wouldnt make sense

@JasonLefevers 9 ай бұрын

There are two versions of this pump. One with a separate pulse line and one that attaches directly to the motor which feeds the pulse through a hole in the back of the pump.

@r.seaboats6666 9 ай бұрын

@@JasonLefevers I bought one with three lines but it still has a hole down the back il prob justJB weld it

@bago4205 4 ай бұрын

@r.seaboats6666 I'm having the same problem with my pump what did you do to fix it

@EthanSikes-i6h 9 ай бұрын

Is the 140 hp fuel pump a different part number? Just bought a 1986 ragin cajun with a johnson 140 but the fuel pump is leaking and the oil pump isnt working and is even wiring up im guessing original owner did it like that i just want the battery bay to be clean so im taking the oil tank completely out

@rondalal5386 10 ай бұрын

I now want to buy these from Amazon. After surfing a few times with them, what is your opinion of them?

@JasonLefevers 9 ай бұрын

I liked them and would recommend them to anyone who doesn’t go snowboarding many times during season. If you snowboard often than I would invest in a set that will hold up to that type of abuse. But these are great for the snowboarder that goes a few times a year.

@gioscervelo 10 ай бұрын

Nicely done

@Flyover-Shorts 10 ай бұрын

My predator 212 is doing that but it’s a single wheel drive how to I fix it

@edreanna52 10 ай бұрын

Same gang 😂😂 just started today

@bryanmiller5007 9 ай бұрын

@@edreanna52you figure out whats wrong ? Just installed mine and doing what this guys doing

@Mr.DoobieDoo 6 ай бұрын

@@edreanna52bruh who gonna figure it out 😂

@Mr.DoobieDoo 6 ай бұрын

@@bryanmiller5007bruh who gonna figure it out 😂

@richamxrx6x 3 ай бұрын

Bro nobody 😢😢😢

@duster8 10 ай бұрын

Can you just bypass it completely? Mine is leaking fuel pretty bad

@JasonLefevers 10 ай бұрын

I'm sure you could, but then would make it difficult to start on some days when it's cold or sat for a while when you need that burst of fuel directly into the motor.

@corykelson 11 ай бұрын

Got these because they were cheap 4 years ago. They take a beating. I've had some pretty bad spills and they are still solid. I've since moved on to better boards but still use these bindings because they are awesome and I have no reason to switch to something different.

@10EyeSee 11 ай бұрын

I know this is an old video but it helped me out A LOT today!

@willinthearea6318 11 ай бұрын

Are these stiff or soft bindings?

@JasonLefevers 11 ай бұрын

To me, they are more stiff than soft. When compared to all of the other bindings I've used.

@kanecoffey8672 Жыл бұрын

Have these and I snowboard a ton and I’m alright. I clip in a different way but they hold very well and they never hold me back. Sent it off some big jumps and drops and nothing has happened. Recommend.

@Jon_Dang 11 ай бұрын

How many days of riding have you used them so far? Thx

@waynehendryx9118 11 ай бұрын

What do you mean that you clip in a different way?

@ralph52 Жыл бұрын

Will this work also on a Johnson gt 200 also?

@cameronwhite69 Жыл бұрын

thank you for making this video, hard to find any like it

@135-j Жыл бұрын

Very awesome and informative video man

@jknight1s Жыл бұрын

Umm.. Ummm. Ummmm… Jesus you don’t even know how they work. Shut up

@pavloskourris277 Жыл бұрын

I was ready to delete my VRO and go with premix. If you delete/disable the VRO do you need to add a fuel pump? All other videos just disable the VRO and leave it in in its place. They just disconnect two sets of wires (the one you showed plus some others and cut off the 2-stroke oil supply by placing a bolt in the line (you also have this). But no other video speaks about adding a fuel pump. Am I missing something? Thanks

@waynemarshall5194 Жыл бұрын

Thank you sir these series of videos helped a great bunch thank you sir

@on1ytheb3st Жыл бұрын

Do you still have to have that wiring harness you unplugged actually plugged in when still running the VRO but with a plugged oil feed line and premixing the tank?