4 ай бұрын
4 ай бұрын
5 ай бұрын
5 ай бұрын
6 ай бұрын
6 ай бұрын
Пікірлер
@clevelandshredder 2 күн бұрын
Where can I find these to buy?
@DohmSpeedShop 2 күн бұрын
Any caterpillar dealer should be able to order these for you, just go to the parts counter
@Steventhedieseltechapprentice 3 күн бұрын
I work for my local CAT dealer and order a lot of tools from the tool catalog. I have that same set.
@DohmSpeedShop 3 күн бұрын
Yeah I just learned about it, which I knew sooner and I would’ve stayed off the tool truck
@BerzerkMaggot777 6 күн бұрын
SOME cat tools are made by snap on
@DohmSpeedShop 6 күн бұрын
Yes some not all, the ones made by snap on are hard to miss from what I’ve seen
@ID10TGARAGE 9 күн бұрын
Maybe consider going to a 1 wire that bypasses the voltage regulator. That seems pretty odd to be getting that high of voltage unless something is wrong with the alt. Have you tried testing the voltage at the alternator?
@DohmSpeedShop 9 күн бұрын
Well my dad had replaced the alt and the current one was bench tested as well so the alt is at least ok
@DohmSpeedShop 9 күн бұрын
I haven’t tried the wire on the regulator tho
@MichaelRiley-t1n 10 күн бұрын
Nothing sounds as good as a V8 Dodge
@DohmSpeedShop 10 күн бұрын
One of my favorite things, a big block with long tube headers
@1crida1 15 күн бұрын
I did this and died. Can you tell me what I did wrong?
@DohmSpeedShop 15 күн бұрын
Too much cowbell
@kickyourfaceandlaugh607 15 күн бұрын
What’s that wire called?
@DohmSpeedShop 15 күн бұрын
Which wire are you referring to?
@taurussho86 16 күн бұрын
Wow, thought Diehard was a Sears brand. Good stuff
@DohmSpeedShop 16 күн бұрын
Yeah it appears that after sears went under advanced auto parts picked up the brand
@Chaseeeeeo2322 22 күн бұрын
Grinder with a cutoff wheel
@DohmSpeedShop 22 күн бұрын
Definitely was about to until I found just enough room to slip it out, never above using the only fix it wheel of doom
@WendyYudnich 26 күн бұрын
You made it look so easy getting knuckle off. I have tried every thing to get mine off. Tried pulley etc. It won't budge at all. N yes I took axle nut n water off.
@DohmSpeedShop 26 күн бұрын
When in doubt, bigger hammer or more fire
@haydenevans1166 19 күн бұрын
Big hammer! And a punch!
@moistgameplays Ай бұрын
As someone who works on the Boxline at GM and has done the job of putting the back tail lights in. The tools we work with are trash
@DohmSpeedShop Ай бұрын
Like assembly line? Wouldn’t surpise me with how cheap of tools companies give employees sometimes
@moistgameplays Ай бұрын
@@DohmSpeedShop yea, the assembly line. Screws being stripped aren't that uncommon. As long as it goes into place, GM will Ship it
@DohmSpeedShop Ай бұрын
@@moistgameplaysyeah so I’ve heard, annoying but it is what it is
@warx101 Ай бұрын
What?
@Dog_in_tree Ай бұрын
What is the point of this clip?
@DohmSpeedShop Ай бұрын
Pointing out the clips gm uses that strip out frequently on the tail light housings
@jeffcon123 Ай бұрын
Inspectors flashlights are the best lol.. when I work on shit I’ll put the flashlight in my teeth… lol it’s got some medical cloth tape around it
@DohmSpeedShop Ай бұрын
Nice tip, I gotta try that
@jeffcon123 Ай бұрын
I used to have a 66 galaxy500.. it was NOT fast 😂 but it was a column shifter that was kinda fun
@DohmSpeedShop Ай бұрын
The owner swapped in a modern 5.0 out of a mustang, I’m sure it moves a little now
@jeffcon123 Ай бұрын
@@DohmSpeedShop god that’s my dream dude.. restomods are my fav… I like that all original build stuff too.. but modern tech in old cars is so so awesome! My favs are when they reshell a normal car.. like take an old Camaro and drop it over a customized modern Camaro frame.. so the interior and all of everything is essentially functional
@DohmSpeedShop Ай бұрын
@jeffcon123 yeah it’s pretty cool to see
@jeffthompson4911 Ай бұрын
thanks Dohm Speed Shop channel for posting this show............fun to see
@DohmSpeedShop Ай бұрын
You’re welcome, thanks for watching!
@mikeshouse8833 Ай бұрын
nice make it
@DohmSpeedShop Ай бұрын
Thanks
@johnnydiaz1093 Ай бұрын
NEEDS A BIGGER ENGINE. ..SOUNDS GOOD
@DohmSpeedShop Ай бұрын
Love how it rumbles
@leroyJackson-t2y Ай бұрын
Nice 😊😊😊
@DohmSpeedShop Ай бұрын
It’s like bacon for your ears
@mdreamworks Ай бұрын
You know what? I am a regular viewer of your KZbin Channel. I have seen all your videos and your content qualities are excellent. I learned lots of things from you. Your channel has great quality content but needs to deliver its right audiences due to SEO problems. You should focus on your SEO so that you can build a big fan base.Thanks. can i help your growing youtube channel
@DohmSpeedShop Ай бұрын
No I’m ok thanks
@timeno1763 Ай бұрын
I like the post. 👍
@DohmSpeedShop Ай бұрын
Glad you enjoy!
@mshadow9280 Ай бұрын
23:30! That’s me
@DohmSpeedShop Ай бұрын
Nice haha it was a pleasure talking to ya.
@bartastichoward9516 Ай бұрын
I can't wait to scratch them gears
@DohmSpeedShop Ай бұрын
Grind some gears
@jeffthompson4911 Ай бұрын
Dohm Speed Shop, that was great. Was there three or four years ago...good show ......thank you Jeff Thompson Rockford IL
@DohmSpeedShop Ай бұрын
Your welcome! Thank you for watching
@drivingdaily582 Ай бұрын
Awesome cars, built better than they are now! Also nice music and video. Thanks for sharing. 👍
@DohmSpeedShop Ай бұрын
Thank you very much!
@drivingdaily582 Ай бұрын
@DohmSpeedShop absolutely I know how much goes into filming at these events and editing and uploading, memory storage etc.
@DohmSpeedShop Ай бұрын
@drivingdaily582 yeah there’s a little bit to it, I did a couple of other car shows recently and will be going to the car show in Hampshire this weekend. All major shows in the area I’ve gone to for years so why not film some of the great cars that made it out for the event.
@drivingdaily582 Ай бұрын
@@DohmSpeedShop awesome
@JoMccarthy-gw8hq Ай бұрын
Rare sight of cops actually helping people
@DohmSpeedShop Ай бұрын
There’s no cops in the video?
@jeffreyrigged Ай бұрын
Im thinking of finding a riding mower and making a kart but not actually using the mower frame. Thinking of making a mini model t hot rod deal. Not sure how ill do it yet.
@DohmSpeedShop Ай бұрын
That would be pretty cool
@MidwestToolReview Ай бұрын
Very happy you like them!! Been apart of my setup for years, but pleased to let them go to someone who appreciates the nostalgia
@DohmSpeedShop Ай бұрын
Absolutely! Can never have too many ratchets!
@xbpete8865 Ай бұрын
thanks for getting my xb!
@DohmSpeedShop Ай бұрын
You’re welcome good sir!
@xbpete8865 Ай бұрын
@@DohmSpeedShop was that your truck next to mine?
@DohmSpeedShop Ай бұрын
@xbpete8865 no I was only a spectator this year unfortunately. If you see a hot rod austin healey or a black road runner next year that’ll be me, but none of my stuff runs rite now
@xbpete8865 Ай бұрын
@@DohmSpeedShop oh okay you looked kinda like the truck owner next to mine and I over heard someone saying to him “ why’s this here” and he said “ if he likes it that’s all that matters” and I loved hearing that
@DohmSpeedShop Ай бұрын
@xbpete8865 ah makes sense
@GlarkStames Ай бұрын
great job!!
@DohmSpeedShop Ай бұрын
Thank you! One of my favorite shows to be at!
@StrawnCo77 Ай бұрын
🤟🏻👌🏻
@DohmSpeedShop Ай бұрын
🤌🤌
@dougieh9676 2 ай бұрын
Original Van Halen makes this truck even cooler 😂
@DohmSpeedShop 2 ай бұрын
Need some classic tunes with a classic truck haha
@WillHolterman 2 ай бұрын
That's a lot of time and effort on your part to make this video. Very cool. I got that orange metropolitan in the beginning of your video.
@DohmSpeedShop 2 ай бұрын
Yeah this is always such a big show, between a couple others I go to, I just had to film some of the gorgeous cars people put their blood sweat and tears into building, and I loved seeing it! Love the color! I hope to be out at the hampshire show in a couple weeks and get some footage of that as well. And thank you, the time it took me to make the video is well worth it!
@zackeryfurgison 2 ай бұрын
brt
@debbiemccarthy3901 2 ай бұрын
Thank you for sharing your video, I enjoy seeing all older cars and the love that is put into there care....❤
@DohmSpeedShop 2 ай бұрын
Your very welcome! One of the shows I try to make every year, can’t wait for the hampshire show in a couple weeks!
@debbiemccarthy3901 2 ай бұрын
@@DohmSpeedShop I'll tune in.......
@jeffthompson4911 2 ай бұрын
thank you for videoing this.... was not able to get there this time...................Jeff Thompson Rockford Illinois subscribed and like
@DohmSpeedShop 2 ай бұрын
Your welcome! I try to make the show every year, my dad and myself used to go every year in his ‘71 road runner (also on the channel) but hopefully next year I’ll have the car out there. Say hi if ya see me out there next year!
@jeffthompson4911 2 ай бұрын
@@DohmSpeedShop ok.......................thanks
@christopherdukett4158 2 ай бұрын
Did you have to drain the brake fluid prior to or can you just switch out the hose without doing anything else?
@DohmSpeedShop 2 ай бұрын
You will loose some brake fluid as you disconnect the line, I usually try to cap it off but you don’t have to. You will have to bleed that wheel when you’re done to get the air out. While the hose is disconnected do not touch the brake pedal or you’ll get air in the whole system and have to rebleed the whole system, watch your fluid level before driving.
@christopherdukett4158 2 ай бұрын
@@DohmSpeedShop awesome. thank you. I'm having the exactly same problem with my patriot. Changed pads, caliper and rotor, so hopefully this fixes it.
@Townsendcat2 3 ай бұрын
Don’t use the impact to do that number one number two mount that thing to a 2 x 4 there’s four bolt holes in the bottom and this is basic stuff, young man. I’m sorry that you don’t have a man to teach you these things if you ever have any questions reach out to meand my sons will help you with whatever knowledge you need young man you don’t hurt yourself ask questions
@DohmSpeedShop 3 ай бұрын
I did this to test the engine before I continue with a project I’m working on, it’s all for fun haha
@johncowart2733 3 ай бұрын
So, what you need is an impact gun w/a 15"mm socket 🖤...
@DohmSpeedShop 3 ай бұрын
Impact doesn’t work when trying to do this, as soon as it hits compression stroke it’ll impact and break the smooth motion to start the engine
@gunztommiegunz 3 ай бұрын
It’s a drill
@DohmSpeedShop 3 ай бұрын
All 20v worth of drill
@isaacramirez6316 3 ай бұрын
Where did u get that tool
@DohmSpeedShop 3 ай бұрын
I got mine from AutoZone but you can also get it from Amazon, OEMTOOLS 27277 is the part number
@kennethcrotts7870 3 ай бұрын
I use a pair of welding c-clamps. Takes about a minute.
@DohmSpeedShop 3 ай бұрын
I don’t like to with dual piston calipers if I can avoid it.
@durn210 3 ай бұрын
By the time you got this done I could have used a C-clamp five times
@DohmSpeedShop 3 ай бұрын
Works the same, and i wasn’t on a crunch for time. Good enough for who it’s for.
@durn210 3 ай бұрын
@DohmSpeedShop timing is everything especially you don't have to pay for your own labor just the parts. Get the Hell in there and get the hell out
@DohmSpeedShop 3 ай бұрын
Usually do, if I’m filming my wrenching none of it is terribly quick because of the filming aspect.
@kimberlykehler4772 3 ай бұрын
My husband everyday he comes home 30yrs of using his hands for hammers breaking countless ratchets he has the snapon guy on speed dial lol but his hands and arms go numb if he doesn't sleep cuddling a pillow he wakes up in so much pain and he's only 45
@DohmSpeedShop 3 ай бұрын
Yeah something I think most mechanics (or people in trades do) out of necessity unfortunately cause it’s just faster than walking across the shop. Bad habit of mine
@thinkfastchucklenutss 3 ай бұрын
that’s awesome!
@DohmSpeedShop 3 ай бұрын
Good ole fb marketplace find!
@JoshHefnerX 3 ай бұрын
I did the same thing you're doing. But much smaller box - was for a mini truck, and my A-frame was much longer. I still dinked the corner once backing up in a tight turn.
@DohmSpeedShop 3 ай бұрын
Yeah I may move it higher onto the rail. I’ve been hearing from others that this may not be the best option, but hey I gave it a shot
@Martin_Wood_ 3 ай бұрын
I had a collapsed brake hose (rubber) and it made my caliber stick on. We replaced the caliber and i found out it was the hose. Blew my mind!
@DohmSpeedShop 3 ай бұрын
Basically what happened here, I replaced the caliper thinking that was the issue and the hose was junk the whole time
@jacobcook7601 3 ай бұрын
Lmao, hopefully you at least got all the air out that you put in, if not someone's life may be in danger.
@DohmSpeedShop 3 ай бұрын
System was bled well and test driven, no issues
@ravenrock541 3 ай бұрын
I can tell you've never had a floor jack failure or you'd have a jack stand under the vehicle. It's an expensive lesson to learn
@DohmSpeedShop 3 ай бұрын
Hard to tell in video but I always have a jackstand under the car, I’ve seen a jack fail before I’d never risk that. May be a harbor freight jackstand but there’s one lingering under there.
@dillonpowell 4 ай бұрын
why wouldn't you disconnect the bottom control arm to the steering knuckle. now you're forcing the customer to get additional work that he or she didn't need.
@DohmSpeedShop 4 ай бұрын
In hindsight I could’ve done that, your not wrong
@generaljohnjohngunznshit4997 4 ай бұрын
What a useless video