I know what you drive now😂

Curious what speakers they used?

As a Rockfordian, I have always been fascinated by abandoned schools. Like...what they were like. How did they feel. What kind of happy memories.

based and stick pilled

Very cool rig

Are you making anymore videos

Still have mine

WAT AN AGLY MOTOR HOM BAT ILIKIT 😂 A COOL RV TO PRISORV AND REMOTOL AS NEU. UP DAIT TO TAC AII OBOR ❤

WAT ACRAP IWOODITLAFTI ALOWN MA DON'T BE CHIP GO GAT ANEU ONE BAT MY BE GOOD VLASIINS TO YOU

Hello friend, how are you, sorry to bother you, I wanted to know if the manual transmission of that 2.2 caravan fits my caravan 2.5 year 1994, complete with its CV axle, please? Do the axles work or do I have to modify that? thank you.

The car that saved Chrysler. Under appreciated cars for sure.

My dad had one in the same color blue. I still have the back seat.

The transmission should be fine if the fluid and filter are changed about every 40,000 miles. Use only ATF+4.

Que hicieron llegar está joya a mi casa en 1978

Gracias a mis hermanos mayores

Soy poblano pero en especial todo este disco ha cido un imno en mi casa

dude, had me a 76 sporty had major issues with the hole thing, took me a year of chasing gremlins, just to get it where it was fit to travle. not a great ride, but once yo get past the headaches, the old dog runs abd runs. here is a tip when buying parts, but triple get a solar charger for batterys. black tank useage is small only 15 gallon then ya need to dump it. check and greese parts wacth for leaks rget get costly fast.had to redo many points wicth told were good. found them roten. water pipes just one of many. look for melted wire. get a second fuse block just to run housing parts.. check geny works too.

Hello friend, sorry for the question. When changing the automatic transmission for a 5-speed, is it necessary to change the BCM computer? Or do you just have to bypass the transmission start switch? thank you.

Hello friend, how are you, sorry for the question... to bypass the automatic transmission start switch, how are those cables connected? both for it to start and for it to have a reverse light? I would appreciate your help, I have a similar one here in Santiago de Chile and I want to make it with a 5-speed transmission, thank you.

Gracias por publicar estos videos historicos que nos ayudan a conocer a nuestra gente y la gente de nuestros ancestros: mi madre y la abuela de mi padre eran de por esos rumbos que no he tenido la dicha de visitar todavia.

Video muy bonito de toda mi familia❤

They hot wired your fan motor check oem wiring for bad fan motor resistor

1985 to 88 had the same look with the sealed beam headlights and metal grille with truck mirrors, 1989 to 91 got the next facelift with newer door mirrors and grille but same old sealed beam headlights and offered extended body . 1992 to 97 got the newer dashboard with composite headlights and revised grille. 97 was only year to have the red tail lights.

Those were great cars! Definitely not a POS. They were much better than the other junks (Celebritys and Tauruses) made by GM and Ford in the 1980s

Hand me over one of those beers un the back, will ya !

Does it still run

That was a mouse that jumped on you lol if you pause it, you can see it, you pissed him off

1:26

This is not the first time that i've seen the chrome tall changer spindle's record shelf (the shelf where the records are hung prepared to drop one by one) facing the incorrect direction or position which what causes the 45's to sometimes not drop always when using that black tall 45 adaptor as seen in this video. The record shelf of the spindle seen here is facing east when it really should be facing north-east if you see what i mean. The solution is you have to remove the platter and force turn the platter axle where the platter sits on that is on the base of the changer right next to the changer gear with vice grips (using a rag or towel not to damage the axle) turning the axle until that notch that is on the top edge that receives the fitting of the little metal thingy sticking out of the side of the tall spindle, that notch on the top edge of the platter axle, where you fit the platter, the notch has to face the north-east direction so that when you fit the spindle in place, it obligates the spindle's record shelf to face north-east or in this case, the spindle record shelf is faced aligned to the tonearm's axle. Also as that record overarm is made of plastic, it's usually slightly not leveled and if you force/bend down the overarm to force it to shape it leveled straight as possible (careful not to break it of course) so that the 45 singles records sitting on the black 45's adaptor's shelf stays on a leveled angle so that the 45's adaptor metal mechanism pushes perfectly against the surface of the hole of the records, pushing off perfectly without any 'miss' when using the black 45 tall adaptor

0:19 "because I fuckin' want it, okay?" lol I like ur attitude, bro. I've seen a '91 Chevy Lumina APV that was converted to become RWD with a 5-speed manual on the floor. Crazy.

Parabéns cara,coisa linda

I prefer the newer look from 1986 to 1989 of these also the were fuel injected too by the redesign. The 1981-85s you truly never see anymore so this is indeed a treat 👍

Looks like Parma OH

My 1st car was an 84 Chevette, with parts from a 76 and a 79. It had a few issues, such as I had to hold the shifter in reverse while reversing, otherwise, it would pop out of gear. But it was a great 1st car. Lots of fond memories roaming the countryside with my buds during my JR/SR years of High School. I even drove to and from my best bud's house and mine several times as the odometer hit 100,000 miles. It was a bright blue, I later added neon green accessories ( Hey, it was the late 80s) LOL. I alsd added a stereo system built mostly from "Flea Market" parts and a "Sparkomatic" radio. It was cheap, but it worked pretty good. Great memories.

Deserves a full restoration.

just stop swearing. you're acting like a 16 year old with a chip on its shoulder. just stop.

Quiet can be good, sleeper effect. Nothing not even the wheels suggest this thing can leave a chevy lumina at the light.

2 days with a welder could have got it going.

When it comes to these I actually consider "base model" a selling point.

Cerco il galleggiante disel gran wojagger 1994

Not the best quality car of this area but far less trashy than a Yugo!!

I'm watching this masterpiece again.. It is so sad they tore it down, Millions of memories lost to time over it's almost 100-year run. Seems like the city doesn't care about these old historic places. like when they tore down the old civil war Hospital on Main Street

What is the fuel mileage ? First one I've seen with a 4 cyl. Most had V6.

Looks like my house, all Mopar except all my cars are Shelby's. Just bought a similar Dakota 2.5. going to paint it like a Shelby Dakota

What are the parts you pointed to at 1:05 and 1:09

What was wrong with the fourth car? Why couldn’t it stay running? Why didn’t it start on the first try when the rest of the Dodgers started on the first one Why did that Ute keep on starting and dying and didn’t want to run I don’t know if that is common on dodge Utes in the winter or not I like weird cars that are half of a car and half of a pick up truck. The front end is a car in the back and is a pick up truck. Is the rampage OK?

Is this car still in your possession ? Oh boy I really hope you say yes lol ... I would like to make a very respectful offer if you do. I have been trying to locate a K-Car for a few years now. Please lmk. Thank you.

These were actually VERY GOOD cars! They "did-the-job" ALWAYS!

Plymouth with dodge caravan rear light ?

i have a 1990 umc aeromate stepvan 2.5l turboit wont stay running idle give it gas and it dies got any suggestions