Hi brother. Great video. Do we need to apply silicone on the rubber seal before putting it back in the position? Thanks
@TehmasKhan4 ай бұрын
Hi brother. Great video. Do we need to apply silicone on the rubber seal before putting it back in the position? Thanks
@Superheadless8 ай бұрын
Any problem restarting without priming fuel filter?
@mohamadkiherkhttab6384 Жыл бұрын
Hallo, das Video ist großartig. Aber ich habe ein Problem mit Öldampf, der aus der Motorhaube meines VWturan austritt. Können Sie mir sagen, wo das Problem liegt? Vielen Dank.
@castrolgtx5064 Жыл бұрын
Thanks for sharing
@Adamsadowy Жыл бұрын
Hi the water in fuel light is on , on my vito 109cdi any tips to deal with it ?
@rs_99_ Жыл бұрын
Awesome
@paulacreman53422 жыл бұрын
Brilliant, thank you very much for this video. Helpful and to the point.
@antonikarin2 жыл бұрын
Have you notice some one if being leacking all those parts... engine pressure oil is flashing and beeping often during the driving?
@roostaraver2 жыл бұрын
Did this fix the leak in the end mate
@bandzar802 жыл бұрын
Great video. Well done
@Harbin272 жыл бұрын
I have lost one of those clips , what can i put something else , ??
@marksmall4082 жыл бұрын
No need to disconnect anything, there's just enough room to manoeuvre the alternator in and out, just need to be careful and take your time!! Just completed my installation... dashboard lit up like a christmas tree with lights, eventually gave a solid red battery light. Check the battery charging after pain fight with the fuse box... check the battery first is my advice!!
@lambo77672 жыл бұрын
Where are you based? Could you do this for me? Please. Ryan
@jeffmantle24682 жыл бұрын
terrible camera work. Maybe get someone to hold a camera next time
@explorethegardenroutesouth26752 жыл бұрын
Thank you for the vid
@naqi162 жыл бұрын
Nice Video Thanks Mate
@afkfavorite2 жыл бұрын
Him I changed mine but it's still leaking even worse. Could par be faulty? I was working very accurate not sure why it's leaking so bad.
@mo9809 Жыл бұрын
Hey I have the same problem could you tell me what the problem was in your case?
@afkfavorite Жыл бұрын
Hi. To be honest I tightened it a little more than manufacturer stated and now leak is really unnoticeable. I think it could be that I have not cleaned surface where seal goes. I've seen some marks left from old seal but I couldn't clean it fully I thought it will be fine. Now I top up 0.5L every 6000miles (6months) but I will need to replace it again.
@mo9809 Жыл бұрын
thank you very much @@afkfavorite
@manzarrafee3 жыл бұрын
Hi does the injector comes with a seal too? I can see a Grove there but my injector didn't have seal on them?
@CryptoMindsets073 жыл бұрын
Hey mate great video. I have a question, do you this van had electric fuel pump in fuel assembly. In my 2003 diesel vito it does not have electric pump. Any help would be great. Thanks
@Thevoiceofsense3 жыл бұрын
This video would have been much better if you showed it from the start of taking things off
@RR-wj5no3 жыл бұрын
Where are you based brother? Can you do this for me?
@patrickjmorgan3 жыл бұрын
Thanks for this, Latif.- Ill be doing this job later in the week- it looks marginally easier than replacing the steering-pump!
@philip.aocallaghan46023 жыл бұрын
After removing the high-pressure line and removing injectors, what is the procedure to bleed the system when re-installed.. thank you
@290Noname3 жыл бұрын
You can use a diagnostic computer to bleed the system
@philip.aocallaghan46023 жыл бұрын
@@290Noname thank you for the reply.. and the possibility to bleed without VCDS please, would you know
@Sensei9483 жыл бұрын
Master error P145F in 1.6 tdi engine appeared during dpf regeneration too high mass air flow during regeneration ... What can it be and how to fix it ...
@jamiebaldwin80033 жыл бұрын
For anyone who experiences an oil leak around your injector on the vw 1.6tdi engine. It certainly won't be the rocker cover gasket as that has no way of leaking oil into around the injectors, also this engine has a VERY Common rocker cover fault, at the back of injector 3/4 by the filler cap they leak through the cover itself, I've seen so many people being told that it's rocker gasket or injector seals, definitely isn't rocker gasket as it's impossible for oil to leak into the injectors, they leak from two separate places around injectors 3 and 4 by the filler cap.
@philip.aocallaghan46023 жыл бұрын
Hi, today I noticed I have a lot of oil around the area you mentioned, are you certain it is the valve cover, there are pools of oil around the injectors ..Thank you for any advice
@jamiebaldwin80033 жыл бұрын
@@philip.aocallaghan4602 it definitely has nothing to do with rocker cover gaskets, these covers have a common factory fault. Look on the Internet about it, they leak in two places around the back of injector 4., I have the same issue. I done the seals, but constantly pools of oil coming from injector 4/3 area. If you look at the rocker cover. You will see that it looks like two prices molded together. It leaks from that. Another way I noticed was I kept cleaning the oil around the injector 3/4 are. Get someone to rev the car and you will see oil coming out of the part ive mentioned, common fault, have a look on the net about it
@jamiebaldwin80033 жыл бұрын
I am going to be taking my injectors out and sealing around the leaking area with some sealant with my finger. Instead of changing the whole cover, also don't forget that if you do buy a rocker cover, there are two types, as there is two types of injector/rocker seals, to fit each type of rocker cover.
@jonai89213 жыл бұрын
@@jamiebaldwin8003 Were you able to fix the leakage with sealant?
@jamiebaldwin80033 жыл бұрын
@@jonai8921 I still haven't had chance to do it yet, you can seal it though instead of removing it all as I noticed someone on the Internet doing it.
@jamiebaldwin80033 жыл бұрын
This is wrong. Must be leaking oil badly. New seals you put on are completely different to the original ones/right ones for your rocker. They sell two types or seals. Your new ones are not for your rocker cover that's why they didn't even click in, they just slotted in due to being too small! I have no idea how anyone on these comments haven't noticed this! Two completely different type of injeactor/rocker seals! New ones fitted are completely wrong! Different part number/different size/different shape all together! Original ones for your rocker has a part number starting with (03L) which is written all over the seals! The seals you have fitted have no part number written on them and they are for seals part numbers with (04L)
@sevdalindikov63543 жыл бұрын
Briliant video. Do you know what is the part number for the rubber seal as shown at 7:00? Kind regards.
@MEGASilleh3 жыл бұрын
Thank you for the vid, this is great! Quick question - should you replace the seals on the actual injectors after you have removed them from the head?
@MEGASilleh3 жыл бұрын
How does that answer my question???!
@adamtwinstravels75154 жыл бұрын
nice 2021
@chuckbradley14 жыл бұрын
Your camera work is shite.
@larbibenmhidi82594 жыл бұрын
Hi. I would like to know if we can change the injector seals on the rocker cover without removing the rocker cover. thank you
@jamiebaldwin80033 жыл бұрын
Yes you can, that's how I done mine, they just prise out with a small flat end screwdriver. The seals in this video are wrong! He's put the wrong and different seals back in, I know because I've done mine and they are totally different shape and size and different part numbers.
@necromecro4 жыл бұрын
Hello there, nice work. Can we uninstall and install injector seal without removing whole cover?
@290Noname4 жыл бұрын
Yes
@necromecro4 жыл бұрын
@@290Noname Thank you. I mean the seal which is mounted on head cover. 4 pieces. Not o-rings on the injektor. Let me check twice :)
@securecloud994 жыл бұрын
can i put diesel injector cleaner in my 2005 2.0 tdi
@securecloud994 жыл бұрын
hi, just.need to ask, if 2005 model also have injectors..
@Narkiukas4 жыл бұрын
what torque for bolts?
@Oscar-je6pp3 жыл бұрын
bump
@itfaqkayani44464 жыл бұрын
Great video really helpful goodwork
@jDeacon1584 жыл бұрын
Are you sure you used the right seals for around the injectors? I went to VW to get the new seals and they gave me the same shape you used in this video however I found they were about 1mm too small on the diameter and didn't seal into the rocker cover so I went back to VW and took an old seal with me and they realised they had given me the wrong seals.
@schindlerk3 жыл бұрын
Same happened to me, no seal at all sue to being sloppy in the rocker cover.
@NohabloEng10 ай бұрын
I've had the same problem, swear it's all these 1.6 engines
@atiamfx4 жыл бұрын
try to touch the TPU chip for a couple of seconds ,make sure your temperature is above 30c degree or use hair dryer or heat gun gently .. that's works for me
@amiltonwong4 жыл бұрын
I have a similar issue on startup the ASUS X-99-A. Does it mean this issue comes from the low temperature?
@atiamfx4 жыл бұрын
@@amiltonwong I think it's kind of light sensor or temperature sensor some thing like that
@amiltonwong4 жыл бұрын
@@atiamfx Got it. Thanks :)
@derrickndika67264 жыл бұрын
How do I replace the Bonnet opening cable on 2008 Mercedes Vito 115cdi
@290Noname4 жыл бұрын
I will find out
@andrewjfulker4 жыл бұрын
Thank you. You explained it all in very straightforward terms. This seemed like a real world replacement that I can actually do after having watched your video.
@johnburton91564 жыл бұрын
You never showed us how to take anything off
@fostermajor95914 жыл бұрын
Thank you Latif Yusuf, for the very handy and informative video. Had the same problem on my mk6 golf 1.6TDI but where the injector holding down bolt broke and fired 1 and 2 injector out ....ouch. Now replaced with all new parts as well as rocker cover gasket and injector seals for rocker cover. Tried TPS but apparently i need a trade account to order stuff, no worries though as i got my parts from GSF car parts (part number 110VG0420) for them.
@290Noname4 жыл бұрын
Cheers for that, GSF are my suppliers didn't know they stock the parts for this
@fostermajor95914 жыл бұрын
@@290Noname Neither did but Eurocar parts at the moment are having a meltdown on deliveries. So just rang GSF on the off chance told them what i needed and they said yes heres the part for the website, punched it in and ordered :-)
@Sensei9483 жыл бұрын
@@290Noname Hello, why does the timing synchronization change from 1.2 on a cold engine to 0.4 on a warm 90 C? Is the timing correctly installed? 1.6 tdi cayc engine ....
@290Noname3 жыл бұрын
@@Sensei948 What engine?
@Sensei9483 жыл бұрын
@@290Noname 1.6 tdi cayc
@AnilKumar-yn6ns4 жыл бұрын
Still a problem on 1.6 tdi 2015 I have an oil leak looks like same problem
@bencooper66164 жыл бұрын
Really helpful - thanks!
@moedem4 жыл бұрын
Apparently this rock cover leak is a common problem for this engine
@stefanr.34954 жыл бұрын
Yeah, it fails at as low as 30k miles
@angel_as57835 жыл бұрын
No se puede extraer las juntas sin levantar la tapa de balancines?. Gracias
@290Noname5 жыл бұрын
puede quitar los sellos sin levantar la cubierta del rcoker
@colin50645 жыл бұрын
First class info very helpful thank you
@SuhailKhan-sp9hj5 жыл бұрын
thenk you so much very good help I do this one my self my brother if I brake you pay ok I find you tank you
@satiyorum5 жыл бұрын
Do you need to take off oil out? Before take off injector from engine..
@290Noname5 жыл бұрын
No you don't have to
@satiyorum5 жыл бұрын
Hi i bought rocker gasket for my car from tps i got rocker gasket, 4 seal ring and 4 washer ring, when i remove injector you need replece clamping claw with bolt is well told me. Do I need to exchange this bolts THANKS
@290Noname5 жыл бұрын
@@satiyorum with VW its advisable to change the bolts as I believe they are stretch bolts