Como puedo obtener dos bici moto de esas aquí en cuba pueden decirme el precio de esa bici moto
@williambustard13798 ай бұрын
Can u post the links to the mounts?
@dfixervergallo77818 ай бұрын
Here it is. www.pedalchopper.com/motor-mount-drag-pipe-stingray-specific/
@XiaolinDraconis9 ай бұрын
Dude I thought this was my channel until I noticed the muffler. I got a gray tarp on my porch and that exact bike I'm building but did not remember uploading this video lol. I got this crappy motor mount that just mimics a v frame, it's such a tight fit man I wish I saw this type of mount. I'm getting an arch pulley that lets me put pulley wheels all along a path however many I need (which is like 2).
@dfixervergallo77819 ай бұрын
No worries bro. Yeah I did a bunch of research before I started to put the bike together. There is always something we would like to do to the project.
@darrinfry2251 Жыл бұрын
Wow great bike ,however can't find the motor mounts like you say . 🤷♂️
@dfixervergallo7781 Жыл бұрын
The other place you can get it from is this site. The have other stuff too. www.pedalchopper.com/
@randyszerencse7320 Жыл бұрын
Would you post a list of all the items?
@dfixervergallo7781 Жыл бұрын
Say no more kzbin.info/www/bejne/m5K3Yp97e795qqc
@lbsavageking3232 Жыл бұрын
What type of exhust is that?
@danielmaldonado1451 Жыл бұрын
Email me
@danielmaldonado1451 Жыл бұрын
What kind of the engine mounts are they!!??
@dfixervergallo7781 Жыл бұрын
This is the parts list video. kzbin.info/www/bejne/m5K3Yp97e795qqc
@lectryack5056 Жыл бұрын
How did you do the tuning Sprocket
@dfixervergallo7781 Жыл бұрын
I bought a hub adapter with sprocket kit. Here is a build video I did. kzbin.info/www/bejne/m5K3Yp97e795qqc
@lectryack5056 Жыл бұрын
Does the exhaust burn ur leg?
@dfixervergallo7781 Жыл бұрын
I wrapped it with exhaust wrap.
@thirdeyesurvivor3886 Жыл бұрын
Are the two bolts on the engine all that’s holding the exhaust on? Also how loud is that exhaust?
@dfixervergallo7781 Жыл бұрын
The two bolts and a clamp. It is on the loud side.
@piotrn2879 Жыл бұрын
Super
@MetalAviation Жыл бұрын
Badass! Finally found an OCC Stingray at a good price. Picking up tomorrow and starting to buy parts for my motor build. Can you post a link to the motor mounts you bought from Amazon? I'm not exactly what I'm looking for.
@dfixervergallo7781 Жыл бұрын
kzbin.info/www/bejne/m5K3Yp97e795qqc This is build video listing the parts I used. Hope this helps you, Thanks again.
@IShadeGreenI Жыл бұрын
Some of my experience with this issue. The oem iacv is really expensive. Even after I clean it I'm still getting rough idle. You can kind of adjust the position of the iacv it gives some play. I took it off like 5 times to clean it and make sure it spins freely, added some DW40. I got nothing to loose. The rpms are still at 1100. So I'm definitely replacing with an off brand one from autozone. Currently waiting on part. Wish everyone luck it didn't work for me. Wish I knew how to calibrate it or something.
@lifesadventureskeepingitre11802 жыл бұрын
What kinda motor mounts did you use cause im building my first stingray and not sure how to mount the motor.
@dfixervergallo77812 жыл бұрын
I bought mine from Amazon but they are no longer available there. You can get these www.pedalchopper.com/motor-mount-drag-pipe-stingray-specific/.
@lifesadventureskeepingitre11802 жыл бұрын
@@dfixervergallo7781 Thank you.
@X_Death-vg8sj2 жыл бұрын
You should links to the items from so they're easier to find
@dfixervergallo77812 жыл бұрын
I got you kzbin.info/www/bejne/m5K3Yp97e795qqc
@dr29442 жыл бұрын
Real cool setup. Mine same color. (If I'm lucky) I'll have it nice like that. Thanks for great ideas. HAGO🖖😎
@dfixervergallo77812 жыл бұрын
Thanks appreciate it. It takes time to build. Just keep at it.
@shannon68152 жыл бұрын
Damn, that is one sturdy ass moterized bicycle. Thats not a bicycle with a moter, that's a motorcycle with pedals lol. Sweet as hell.
@dfixervergallo77812 жыл бұрын
Thanks, it is super fun to ride.
@driftboss22152 жыл бұрын
This could be why when I full throttle realy fast the car cuts out
@Wavylit2 жыл бұрын
i cant find the moter mounts no were
@dfixervergallo77812 жыл бұрын
I got a parts build video. Let me post the link. Hope it helps. kzbin.info/www/bejne/m5K3Yp97e795qqc
@arkar50552 жыл бұрын
please how buy i "am from Myamar
@michaelpitts30492 жыл бұрын
I have one with no motor
@asphaltcowboy78682 жыл бұрын
Can you tell us what size axle adapter you used?
@dfixervergallo77812 жыл бұрын
Yeah no problem, I actually did a build video. Here is the link hope it helps. kzbin.info/www/bejne/m5K3Yp97e795qqc
@stonefree18372 жыл бұрын
Nice build . Gotta put the chain tensioner on chain return side.
@garyjames29262 жыл бұрын
Great job like how You do what you can The 70s Green💚it Happy🤩trails
@dfixervergallo77812 жыл бұрын
Thanks, appreciate you. Happy trails to you also.
@jackdenied97562 жыл бұрын
What is the Motor mount your using for your motor
@dfixervergallo77812 жыл бұрын
Here is a build video I did hope this helps. kzbin.info/www/bejne/m5K3Yp97e795qqc
@jannovaknovak6822 жыл бұрын
Chtělo by to český výklad, je to možné ?
@OutdoorJoe7342 жыл бұрын
how is gas tank mounted?
@dfixervergallo77812 жыл бұрын
I used plumbers strap and some self tapping screws. www.lowes.com/pd/AMERICAN-VALVE-1-2-in-to-4-in-dia-Galvanized-Hanger-Iron/1244159
@otisrush81103 жыл бұрын
Hey,,😎where did you get your front fender from?
@dfixervergallo77813 жыл бұрын
Link to my build video. kzbin.info/www/bejne/m5K3Yp97e795qqc
@JorgeRodriguez-ei2gi3 жыл бұрын
Great video of your chopper, could you leave some link of your buy on ebay also on amazon for your items for your chopper, thanks, say hello joe.
@dfixervergallo77813 жыл бұрын
Say no more fam. kzbin.info/www/bejne/m5K3Yp97e795qqc
@codebreakeractivate63663 жыл бұрын
Hello I have a question how did you mount your gas tank I mounted mine and it messed it up and dose yours shake a lot to?
@dfixervergallo77812 жыл бұрын
Sorry for late reply I used plumbers strap.
@darkroomignite82642 жыл бұрын
A smaller sprocket on the chopper reduces vibration. You want a 32-36 tooth for the smaller rear tire
@deetoxinz72523 жыл бұрын
Idk why but my exhaust like yours does NOT fit my bike like that and idk why.....
@dfixervergallo77813 жыл бұрын
Possibly different engine mounts?
@deetoxinz72523 жыл бұрын
@@dfixervergallo7781 same one I'm pretty sure.
@CORYJOHNM3 жыл бұрын
I think this is the best one yet. Common sense build. KISS rule applied and you did your DD on those parts.
@dfixervergallo77813 жыл бұрын
Thanks, appreciate it. Decide what you want out of the project. Research how to get there take your time build it right.
@DavidPerez-iz2lo3 жыл бұрын
I just saw the video and was very much swayed to see a imense savings opportunity opposed to the Floridian way with respect to Jim ..There is enough moola for all and I m going to check out this possibility of a greater way of saving some ash for a newer up to date bike as there are so many nowdays. Thank for the share and have a safe covid memorial day.
@dfixervergallo77813 жыл бұрын
Thanks you too. I did this build with saving on my gas expenses, plus on vehicle insurance.
@Jeremy-km4dj3 жыл бұрын
where did you get your rear tire
@dfixervergallo77813 жыл бұрын
www.amazon.com/gp/aw/d/B01CGDW2AO?psc=1&ref=ppx_pop_mob_b_asin_title Unfortunately it is not available
@Jeremy-km4dj3 жыл бұрын
where did you get your front drum brake?
@dfixervergallo77813 жыл бұрын
kzbin.info/www/bejne/m5K3Yp97e795qqc Here is a build video I did. Thanks for the comment.
@charliebrown75663 жыл бұрын
What you hub size sprocket adapter I have the 2006 Diamondback drifter chopper a need that adaptor thanks love your bike
@dfixervergallo77813 жыл бұрын
Thanks appreciate it. I did a build video check it out and let me know if you got any questions. My hub measured 1.25" I got the 36 tooth for more top end. www.amazon.com/gp/aw/d/B00LGXTQ1E?psc=1&ref=ppx_pop_mob_b_asin_title
@charliebrown75663 жыл бұрын
@@dfixervergallo7781 thanks man il check it and thanks again I enjoy building these bikes love it
@timothyparker89243 жыл бұрын
Where did you get the motor mounts ..link?
@danhood97163 жыл бұрын
What size bike is the schwinn I have a 20 inch trying to do the same I am having a few issues
@danieltackett89833 жыл бұрын
So where did you get the back tire fr? Lol
@dfixervergallo77813 жыл бұрын
I got it from amazon Mongoose MG78456-2 Fat Tire, 20 x 4
@gregsteele90023 жыл бұрын
You can get mounts from Gasbike or Piston Chopper
@kcscustombikes3 жыл бұрын
Can you pls do daily or weekly vlogs of you driving it and just showing the bike ?
@pedropavon99043 жыл бұрын
Nice
@kenithgravitt67013 жыл бұрын
Can I have your bike 😭😭😭😭😜😜😜😜😜
@thecrackedduo13673 жыл бұрын
I also have an schwinn stingray that I want motorized and was wondering if you have suggestions for a cheap reliable braking system
@dfixervergallo77813 жыл бұрын
The faster you are going the better the brakes you want to have. Unfortunately the squeeze rubber bicycle brakes are the cheapest but they don't provide adequate breaking.
@jhoner26354 жыл бұрын
How did you get the drum break?
@dfixervergallo77814 жыл бұрын
These guys have a few different options. www.pedalchopper.com/front-brake-solutions-occ-schwinn-stingray/
@austen99734 жыл бұрын
Where did u find the motor mount I'm looking for 1 u don't have to weld to the frame and how much
@dfixervergallo77814 жыл бұрын
These are the mounts I bought, unfortunately, they are currently unavailable. www.amazon.com/gp/product/B01JB4TTTI/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Here is a different option. www.pedalchopper.com/motor-mount-drag-pipe-stingray-specific/
@michaelreitzler71063 жыл бұрын
I got mine for 65 with shipping on ebay
@nicolashallett36004 жыл бұрын
I go two of these bikes ..both I'm planing on getting. Motor on
@dfixervergallo77814 жыл бұрын
They are fun to ride, I enjoy mine.
@StoicVisions4 жыл бұрын
Plus how did you do the wiring for the dash to work and everything omg this is so relieving to see someone recently have something done
@dfixervergallo77814 жыл бұрын
The Mazda coolant temp sensor threads in to the GM cylinder head. Then just plug it in. The oil pressure sensor I used this www.amazon.com/Engine-Adapter-Pressure-Sensor-551172/dp/B015NFNC10/ref=mp_s_a_1_1_sspa?dchild=1&keywords=ls1+oil+pressure+adapter&qid=1599566377&sprefix=ls1+oil+pre&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyR1M5MVhTOTZYOTA3JmVuY3J5cHRlZElkPUEwMDc4Mzc3MkpTTE9KNk9NOFA0UyZlbmNyeXB0ZWRBZElkPUEwMTEzODMxMjJCUVNXQTVaOFZZViZ3aWRnZXROYW1lPXNwX3Bob25lX3NlYXJjaF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl For the Crankshaft this is what I got www.ls1rx8.com/store/p14/LS_Trigger_Wheel.html
@StoicVisions4 жыл бұрын
DFixer Vergallo I love you bro thank you
@StoicVisions4 жыл бұрын
Bro I have so many questions lmfao I’m doing a swap right now in my Rx8 what did you do for the steering shaft and for the brake lines ?
@dfixervergallo77814 жыл бұрын
The brake lines I just bent them out of the way. Without taking them apart. The steering I bought this www.ls1rx8.com/store/p95/Steering_Extension_.html
@StoicVisions4 жыл бұрын
DFixer Vergallo fueling ?
@dfixervergallo77814 жыл бұрын
Dissembled the RX8 Fuel pump assembly and installed the one that works for the power and fuel demand of The engine. Remove the RX8 in fuel pump assembly fuel pressure regulator.
@StoicVisions4 жыл бұрын
DFixer Vergallo man I love it I’m gonna be doing a twin turbo set up and a lot of this little shit has been bugging me
@dfixervergallo77814 жыл бұрын
Nice, the plan on the one I am working on is Super Charger.