OCC stingray motorized

My OCC schwinn Stingray Motorized build. F2 thrush exhaust (it is louder but good)
Short intake manifold
After market air filter adapter and filter
Direct bolt on motor mounts for Stingray
Bolt on hub sprocket 34T
High compression head
Front drum brake wheel

[@CORYJOHNM]

I think this is the best one yet. Common sense build. KISS rule applied and you did your DD on those parts.

[@dfixervergallo7781]

Thanks, appreciate it. Decide what you want out of the project. Research how to get there take your time build it right.

[@DavidPerez-iz2lo]

I just saw the video and was very much swayed to see a imense savings opportunity opposed to the Floridian way with respect to Jim ..There is enough moola for all and I m going to check out this possibility of a greater way of saving some ash for a newer up to date bike as there are so many nowdays. Thank for the share and have a safe covid memorial day.

[@dfixervergallo7781]

Thanks you too. I did this build with saving on my gas expenses, plus on vehicle insurance.

[@stonefree1837]

Nice build . Gotta put the chain tensioner on chain return side.

[@garyjames2926]

Great job like how You do what you can The 70s Green💚it Happy🤩trails

[@dfixervergallo7781]

Thanks, appreciate you. Happy trails to you also.

[@XiaolinDraconis]

Dude I thought this was my channel until I noticed the muffler. I got a gray tarp on my porch and that exact bike I'm building but did not remember uploading this video lol. I got this crappy motor mount that just mimics a v frame, it's such a tight fit man I wish I saw this type of mount. I'm getting an arch pulley that lets me put pulley wheels all along a path however many I need (which is like 2).

[@dfixervergallo7781]

No worries bro. Yeah I did a bunch of research before I started to put the bike together. There is always something we would like to do to the project.

[@shannon6815]

Damn, that is one sturdy ass moterized bicycle. Thats not a bicycle with a moter, that's a motorcycle with pedals lol. Sweet as hell.

[@dfixervergallo7781]

Thanks, it is super fun to ride.

[@dr2944]

Real cool setup. Mine same color. (If I'm lucky) I'll have it nice like that. Thanks for great ideas. HAGO🖖😎

[@dfixervergallo7781]

Thanks appreciate it. It takes time to build. Just keep at it.

[@gregsteele9002]

You can get mounts from Gasbike or Piston Chopper

[@kcscustombikes]

Can you pls do daily or weekly vlogs of you driving it and just showing the bike ?

[@nicolashallett3600]

I go two of these bikes ..both I'm planing on getting. Motor on

[@dfixervergallo7781]

They are fun to ride, I enjoy mine.

[@MetalAviation]

Badass! Finally found an OCC Stingray at a good price. Picking up tomorrow and starting to buy parts for my motor build. Can you post a link to the motor mounts you bought from Amazon? I'm not exactly what I'm looking for.

[@dfixervergallo7781]

kzbin.info/www/bejne/m5K3Yp97e795qqc This is build video listing the parts I used. Hope this helps you, Thanks again.

[@piotrn2879]

Super

[@danhood9716]

What size bike is the schwinn I have a 20 inch trying to do the same I am having a few issues

[@timothyparker8924]

Where did you get the motor mounts ..link?

[@darrinfry2251]

Wow great bike ,however can't find the motor mounts like you say . 🤷‍♂️

[@dfixervergallo7781]

The other place you can get it from is this site. The have other stuff too. www.pedalchopper.com/

[@TheFabricatingNeanderthal]

Do an update and ride video I wanna see that thruster pipe in action

[@dfixervergallo7781]

kzbin.info/www/bejne/hJi0k32rrNuDfLM Here it is, have to wait for nicer weather to do a drive.

[@JorgeRodriguez-ei2gi]

Great video of your chopper, could you leave some link of your buy on ebay also on amazon for your items for your chopper, thanks, say hello joe.

[@dfixervergallo7781]

Say no more fam. kzbin.info/www/bejne/m5K3Yp97e795qqc

[@hermitcrab9250]

Did you have to buy extended clutch and throttle cables to make them fit with the apehangers?

[@dfixervergallo7781]

I used the ones that came with the kit.

[@hermitcrab9250]

@@dfixervergallo7781 Ok thanks

[@charliebrown7566]

What you hub size sprocket adapter I have the 2006 Diamondback drifter chopper a need that adaptor thanks love your bike

[@dfixervergallo7781]

Thanks appreciate it. I did a build video check it out and let me know if you got any questions. My hub measured 1.25" I got the 36 tooth for more top end. www.amazon.com/gp/aw/d/B00LGXTQ1E?psc=1&ref=ppx_pop_mob_b_asin_title

[@charliebrown7566]

@@dfixervergallo7781 thanks man il check it and thanks again I enjoy building these bikes love it

[@thirdeyesurvivor3886]

Are the two bolts on the engine all that’s holding the exhaust on? Also how loud is that exhaust?

[@dfixervergallo7781]

The two bolts and a clamp. It is on the loud side.

[@thecrackedduo1367]

I also have an schwinn stingray that I want motorized and was wondering if you have suggestions for a cheap reliable braking system

[@dfixervergallo7781]

The faster you are going the better the brakes you want to have. Unfortunately the squeeze rubber bicycle brakes are the cheapest but they don't provide adequate breaking.

[@williamglass2223]

What size stingray is that, is it the kids size? I’m looking to buy one and motorize it, but I’m 6’2” and not sure if it would look a little silly.

[@dfixervergallo7781]

I have a adult size, I am 5'9" I would think you should be ok.

[@brucerussell1708]

Is that the original wheel on the front? Did you add the drum brake to it? If so what is it called and where do I get one?

[@dfixervergallo7781]

This is the wheel www.pedalchopper.com/front-brake-solutions-occ-schwinn-stingray/

[@lifesadventureskeepingitre1180]

What kinda motor mounts did you use cause im building my first stingray and not sure how to mount the motor.

[@dfixervergallo7781]

I bought mine from Amazon but they are no longer available there. You can get these www.pedalchopper.com/motor-mount-drag-pipe-stingray-specific/.

[@lifesadventureskeepingitre1180]

@@dfixervergallo7781 Thank you.

[@MrLinkvi]

How were you able to mount the gas tank like that?

[@dfixervergallo7781]

This is what I used with self tapping screws. www.amazon.com/LASCO-13-1603-22-Gauge-Galvanized-Perforated/dp/B00HYWEUAS/ref=gp_aw_ybh_a_1?_encoding=UTF8&psc=1&refRID=7AWHAXX9T3H0DPQG78HW

[@codebreakeractivate6366]

Hello I have a question how did you mount your gas tank I mounted mine and it messed it up and dose yours shake a lot to?

[@dfixervergallo7781]

Sorry for late reply I used plumbers strap.

[@darkroomignite8264]

A smaller sprocket on the chopper reduces vibration. You want a 32-36 tooth for the smaller rear tire

[@AlbertoSerranoQuinones-eq7qw]

Como puedo obtener dos bici moto de esas aquí en cuba pueden decirme el precio de esa bici moto

[@randyszerencse7320]

Would you post a list of all the items?

[@dfixervergallo7781]

Say no more kzbin.info/www/bejne/m5K3Yp97e795qqc

[@jackdruyon7338]

Hey man sweet ride! Where did you find your engine ?

[@jackdruyon7338]

And your aluminum mounting brackets ?

[@dfixervergallo7781]

www.amazon.com/gp/aw/d/B0129H7HKW?psc=1&ref=ppx_pop_mob_b_asin_title This is the engine kit I bought.

[@dfixervergallo7781]

www.amazon.com/Chopper-2-Stroke-Motorized-Bicycle-Engine/dp/B07BHYD4VC/ref=mp_s_a_1_90?dchild=1&keywords=80cc+bicycle+engine+kit&qid=1587093755&sprefix=80cc+&sr=8-90&swrs=D2A27648E55A2E956EF47F1F7A5C711E This are the mounts I used. Thanks

[@jackdruyon7338]

DFixer Vergallo thanks g

[@austen9973]

Amazon ebay or find them in you local area

[@Wavylit]

i cant find the moter mounts no were

[@dfixervergallo7781]

I got a parts build video. Let me post the link. Hope it helps. kzbin.info/www/bejne/m5K3Yp97e795qqc

[@contractkilla6587]

👍👍👍👍👍👍☝️

[@jannovaknovak682]

Chtělo by to český výklad, je to možné ?

[@asphaltcowboy7868]

Can you tell us what size axle adapter you used?

[@dfixervergallo7781]

Yeah no problem, I actually did a build video. Here is the link hope it helps. kzbin.info/www/bejne/m5K3Yp97e795qqc

[@duvanmartinez8956]

What size sprocket adapter do you use?

[@dfixervergallo7781]

This is the one I ordered, it is 1 1/4 I placed the rubber pad between the sprocket and hub adapter to also. www.pedalchopper.com/performance-aftermarket-machined-cnc-billet-aluminum-parts/three-point-hub-adaptor/

[@X_Death-vg8sj]

You should links to the items from so they're easier to find

[@dfixervergallo7781]

I got you kzbin.info/www/bejne/m5K3Yp97e795qqc

[@kennethwinegar3261]

Do you have the link for the mounts you used

[@dfixervergallo7781]

I got these from Amazon OCC Chopper CNC Mount For 2-Stroke 66CC/80CC Gas Motorized Bicycle Engine by GasBike. Looks like they are out of stock but you can still get them from this link. www.pedalchopper.com/motor-mount-drag-pipe-stingray-specific/

[@danielmaldonado5212]

What kind of the engine mounts are they!!??

[@dfixervergallo7781]

This is the parts list video. kzbin.info/www/bejne/m5K3Yp97e795qqc

[@otisrush8110]

Hey,,😎where did you get your front fender from?

[@dfixervergallo7781]

Link to my build video. kzbin.info/www/bejne/m5K3Yp97e795qqc

[@arkar5055]

please how buy i "am from Myamar

[@jackdenied9756]

What is the Motor mount your using for your motor

[@dfixervergallo7781]

Here is a build video I did hope this helps. kzbin.info/www/bejne/m5K3Yp97e795qqc

[@lectryack5056]

How did you do the tuning Sprocket

[@dfixervergallo7781]

I bought a hub adapter with sprocket kit. Here is a build video I did. kzbin.info/www/bejne/m5K3Yp97e795qqc

[@MrLinkvi]

How do you have the gas can bolted on?

[@dfixervergallo7781]

Sorry for the super late reply. I actually used metal strap and self-tapping screws. www.amazon.com/Mintcraft-TWC0534-3L-Pipe-Strap/dp/B002WD9EXM/ref=sr_1_9?dchild=1&keywords=metal+strap&qid=1601491071&sr=8-9

[@Jeremy-km4dj]

where did you get your rear tire

[@dfixervergallo7781]

www.amazon.com/gp/aw/d/B01CGDW2AO?psc=1&ref=ppx_pop_mob_b_asin_title Unfortunately it is not available

[@judahhaynes4694]

Where did you get the front fender from?

[@dfixervergallo7781]

Sorry for the long reply but here is the exact one I bought. www.amazon.com/gp/aw/d/B01MU7446Q?psc=1&ref=ppx_pop_mob_b_asin_title

[@williambustard1379]

Can u post the links to the mounts?

[@dfixervergallo7781]

Here it is. www.pedalchopper.com/motor-mount-drag-pipe-stingray-specific/

[@Jeremy-km4dj]

where did you get your front drum brake?

[@dfixervergallo7781]

kzbin.info/www/bejne/m5K3Yp97e795qqc Here is a build video I did. Thanks for the comment.

[@georgemort3599]

We’re did you get the studed tires

[@dfixervergallo7781]

I got it from amazon Mongoose MG78456-2 Fat Tire, 20 x 4

[@gagan-tb2pp]

Where do you get the front fender?

[@dfixervergallo7781]

I used Lowrider 20" Flared Adjustable Front Fender Chrome. www.amazon.com/Flared-Adjustable-Front-Fender-Chrome/dp/B01MU7446Q/ref=pd_ybh_a_3?_encoding=UTF8&psc=1&refRID=T244P7N9J0YB1RP3EZC9

[@jhoner2635]

How did you get the drum break?

[@dfixervergallo7781]

These guys have a few different options. www.pedalchopper.com/front-brake-solutions-occ-schwinn-stingray/

[@danieltackett8983]

So where did you get the back tire fr? Lol

[@dfixervergallo7781]

I got it from amazon Mongoose MG78456-2 Fat Tire, 20 x 4

[@deetoxinz7252]

Idk why but my exhaust like yours does NOT fit my bike like that and idk why.....

[@dfixervergallo7781]

Possibly different engine mounts?

[@deetoxinz7252]

@@dfixervergallo7781 same one I'm pretty sure.

[@OutdoorJoe734]

how is gas tank mounted?

[@dfixervergallo7781]

I used plumbers strap and some self tapping screws. www.lowes.com/pd/AMERICAN-VALVE-1-2-in-to-4-in-dia-Galvanized-Hanger-Iron/1244159

[@mattfixit]

Where did you get your tire

[@dfixervergallo7781]

I got it from amazon Mongoose MG78456-2 Fat Tire, 20 x 4

[@gta5grindzxb145]

Over $70 for that exhaust? I gave $40 to $50 for mine. Same thing

[@dfixervergallo7781]

That is a great buy. I should have looked more before I pulled the trigger on the one I bought. Can't win them all.

[@michaelpitts3049]

I have one with no motor

[@mattfixit]

Hi

[@dfixervergallo7781]

Hello

[@kenithgravitt6701]

Can I have your bike 😭😭😭😭😜😜😜😜😜

[@CarltonsDayzVids]

Dude the prices you're saying you're paying for those items is ridiculous and unrealistic

[@dfixervergallo7781]

Well unfortunately that is what I paid for them. I don't have any need or reason to lie about that.

[@patrickroberts7847]

You might as well buy a motorcycle dude if you spent that much money

[@dfixervergallo7781]

True, the only real advantage to having a motorized bicycle is no insurance, no plates, and in some states no drivers license.

[@danielmaldonado5212]

Email me

[@austen9973]

Where did u find the motor mount I'm looking for 1 u don't have to weld to the frame and how much

[@dfixervergallo7781]

These are the mounts I bought, unfortunately, they are currently unavailable. www.amazon.com/gp/product/B01JB4TTTI/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Here is a different option. www.pedalchopper.com/motor-mount-drag-pipe-stingray-specific/

[@michaelreitzler7106]

I got mine for 65 with shipping on ebay