This is to pump water in to the espresso machine and pitcher rinser but what gets connected for the gray water to come out!
@CaffewerksКүн бұрын
Typically your espresso machine will come with a drain hose, so you'll use that. We offer a drain hose that works great with the spin jet rinser: caffewerks.com/products/pitcher-rinser-drain-hose-for-300mm-600mm-rinsers?_pos=2&_psq=drain-ho&_ss=e&_v=1.0 You can feed both drain hoses into a waste water container.
@wwinky9911 күн бұрын
I can see where it would be helpful but I don’t think it looks hygienic
@Caffewerks10 күн бұрын
I am curious to hear more about that thought? Can you elaborate?
@sariego918 күн бұрын
Would this be ok with the la marzocco linea mini?
@Caffewerks16 күн бұрын
Yes! You will need to convert your Mini to "direct plumb in" and then you connect the CW5000 water pump system!
@sariego914 күн бұрын
@@Caffewerks I have the plumb kit on hand, I will start saving money for this it looks great thank you
@hgerrard2745Ай бұрын
Excellent, nice job pal
@CaffewerksАй бұрын
Thank you! Cheers!
@UknowjustinАй бұрын
Beautiful!
@CaffewerksАй бұрын
Thank you!
@brandons5396Ай бұрын
How often should Flojet pump be kicking in? I have mine setup with pressurized tank and usually it will toggle on every second shot or near the end of shot.
@CaffewerksАй бұрын
A BW5000 pump will kick on nearly every time to draw water from it. Adding a larger accumulator tank will keep it from turning on and off every time
@brandons5396Ай бұрын
How often should Flojet pump be kicking in? I have mine setup with pressurized tank and usually it will toggle on every second shot or near the end of shot.
@CaffewerksАй бұрын
A BW5000 pump will kick on nearly every time you draw water from it. Adding a larger accumulator tank will keep it from turning on and off every time
@RSURRECTED2 ай бұрын
hi Caffewerks, im in the process of building a cart and seeking advice on the setup I found on your website for a GS3 pump/accumulator kit to plumb in along with a plumbing lines for a pitcher rinser and drain for the gs3. Is there an email I can reach for some consultation? Thanks!
No need for a pressure regulator after the accumulator?
@Caffewerks3 ай бұрын
No, no need, but it may be helpful depending on what you are connecting to the system.
@chookchack3 ай бұрын
@@Caffewerks so whats the line-pressure this accumulator is giving? I have the lelit bianca v2.
@Caffewerks2 ай бұрын
@@chookchack the accumulator does not increase / decrease pressure. It simply holds an additional amount of water to keep the pump from over cycling. Tgey are set to 15-20 PSI
@chookchack2 ай бұрын
@@Caffewerks im asking because ive read lelit bianca prefers inline pressure around 2-3 psi.
@esbenrasmussen42893 ай бұрын
Would've been nice to hear the sound from it. I am switching to remin RO soon, but a vibe pump to feed my rota machine seems a step backwards
@Caffewerks3 ай бұрын
Sound is a hard thing to capture - because it is going to vary depending on where and how and what material you have your system in or on. A larger accumulator will keep the pump from cycling frequently. Check out our High Volume System!
@mariovasquezsr77734 ай бұрын
Thanks for the video! Great idea, would you consider doing a video about how the plumbing works ? I currently have a collapsible coffee cart and it can get pretty heavy, and doing it every weekend Im starting to see a little bit of wear N tear.
@Caffewerks4 ай бұрын
We have a few videos on our channel that are install / FAQ videos of our systems! Our Connect Cube System is a great match for collapsible carts!
@trisdelphie4 ай бұрын
Please provide information on the size of the orchestral notes engine gasket? 
@trisdelphie4 ай бұрын
Nota Orchestrale
@Caffewerks4 ай бұрын
Our 8mm gasket should be the right fit for your machine
@scider24 ай бұрын
Do you connect the filter after the accumulator?
@Caffewerks4 ай бұрын
After!
@RSURRECTED4 ай бұрын
nice work
@Caffewerks4 ай бұрын
Thank you!
@visuallyrapt4 ай бұрын
Looking gewddd, Ember Gewds Good! Muahaha.
@Caffewerks4 ай бұрын
😂
@ericaleshon47345 ай бұрын
Ragana is sick
@Caffewerks5 ай бұрын
🤙
@khaledsha7706 ай бұрын
To which pressure did you set on the accumulator? Its recommended to set it 0.2 bar under pump cut-in pressure, but couldn't find this information any where!
@Caffewerks5 ай бұрын
We preset our acumulator pressure before shipment. If you need to make adjustments to your pressure, you can do so with a pressure regulator.
@Tawfiqsaid237 ай бұрын
Do these come in different plug types?
@Caffewerks7 ай бұрын
Hello, They can, depending on what product and what plug needed. Send us a email [email protected]
@simonrene79868 ай бұрын
Does the pump run each time you use the rinser and/or pull a shot? I was ready to order a kit but the noise just through me off :( Would there be a way to fix that? Maybe "encasing" the pump? That being said, it's a pretty neat system though. Exactly what I have been looking for.
@Caffewerks8 ай бұрын
Hello! ALL pump systems will make noise, its part of the function. The volume of the sound will depend on the material you place the system on (Wood Vs Metal) The accumulator helps keep the pump from engaging (turning on) with each shot you pull. The larger the accumulator, the less the pump will turn on and off.
@Rfalzo10 ай бұрын
EXACTLY what I was looking for! ordering a kit for espresso and coffee brewer. Do you have a video on the pressure reducer install on an espresso machine?
@Caffewerks10 ай бұрын
Hello! Thanks for the kind words. The Pressure Regulator gets installed inline between the the end fitting and the check valve. You can see an install diagram in the photo gallery here: caffewerks.com/collections/install-kits/products/copy-of-espresso-machine-install-kit
@markjuneacero11 ай бұрын
I see that on the espresso machine, the gauge has already pressure on the pump side. Should you bleed off that line during closing or just leave that pressure there overnight?
@Caffewerks10 ай бұрын
You can leave it plugged in and powered on over night.
@lewf5685 Жыл бұрын
Thanks! Great information!
@Caffewerks11 ай бұрын
Our pleasure!
@WakeUpNow1 Жыл бұрын
hello sir pleas can i get your contact i have something i want to enquire from you
Do you still need a water softening and filtration system?
@Caffewerks Жыл бұрын
We always suggest using some kind of Filtration. We have panel mounted Dual stage filters, as well as in line filters. Depends on your water, and your needs!
@tristanmontemurro3185 Жыл бұрын
Hey can I plug a generator in to all of this?
@Caffewerks Жыл бұрын
Hi Tristan, Our Electrical Distribution Panel is best run on a generator
@saifpathan7650 Жыл бұрын
I need this pump can you send me your contact number
@DEADPEDAL Жыл бұрын
This is so sick. I am moving to the area soon so I can't wait to see the store and the truck!
@Caffewerks Жыл бұрын
Have fun!
@reza0gan Жыл бұрын
Hello, we are planning for a small coffee station with an espresso machine to handle an estimated 100-200 cups a day. There is a main water source but the pressure is rather low (~1.0 bar) and we need at least 2.0 bar for the machine. Can you help to recommend a solution that would help us to increase & stabilize the water pressure for our setup? Thank you.
@Caffewerks Жыл бұрын
Our 3.2 high volume system will increase pressure to 60-70 PSI. So this would be our suggestion for a boost system.
@chungster94 Жыл бұрын
Hello! Recently purchased a water pump system from Caffewerks and I am wondering which tank you recommend for waste water using the reliance 7gal aquatainer for fresh water, keeping in mind the 15% larger rule mentioned in this video. Thanks in advance for your help!
@Caffewerks Жыл бұрын
Hello! Many of our customers look to RV water tanks when looking for a larger size. Rec Pro is a great brand
@ibandribew Жыл бұрын
Very nice to get this whole thing at once. Thank you. Doing a hand sink in the cart, can I just use a large accumulator after the pump and have three water outlets?
@Caffewerks Жыл бұрын
Our High Volume system would be able to support your hand wash sink, rinser and espresso machine!
@ibandribew Жыл бұрын
@@Caffewerks thank you, that's great
@user-ez6pi2zm6h Жыл бұрын
How can I the aqua tanker to dispense water for watering patio plants? I don't have any outdoor faucet so I was hoping I could rig this for that purpose. Thank you.
@Caffewerks Жыл бұрын
Hello, The BW500 could be a great solution for your need. You would use the pump system with a fresh water tank, like a 5 gallon water cooler jug. Then you would want to connect some type of hose end for watering. This system shown, is for use with Espresso machines.
@user-ez6pi2zm6h Жыл бұрын
@@Caffewerks Thank you for your suggestion. Under consideration.
@andrewrockwell1086 Жыл бұрын
Random question, but I've been wondering about using a Flojet and accumulator to plumb in a new espresso machine, but I don't have room for a 5 gal tank nearby. Does the pump produce enough pressure (head) to allow the watertank to be a floor below my kitchen?...oddly that would be my easiest solution.
@Caffewerks Жыл бұрын
Yes and no. It could work, its just a long way to travel. We have a client that made a platform, a floor below, but high on the ceiling, so that the tank was as close as possible. It worked and was pretty cool!
@andrewrockwell1086 Жыл бұрын
@@Caffewerks thanks for that- I may give that a shot!
@jaaasper11 Жыл бұрын
my order didn't have plugs when it arrived. When removing tubing from connections it makes mark on the tube, do I need to cut the part where it has marks when reconnecting the same tube? I need to remove mine when transporting it to fit in my container.
@Caffewerks Жыл бұрын
Unless the edge (where the tubing meets the fitting flat) gets damaged, you should be okay.
@irabeltran7415 Жыл бұрын
Fantastic! I live in San Diego and know Bird Rock- can't wait to see the VW truck in action. Beautiful work.
@Caffewerks Жыл бұрын
Thank you very much!
@ahmdAlaswad Жыл бұрын
Is it possible to make two outlets out of it? one to be connected to the coffee machine and the other to a water tab?
@Caffewerks Жыл бұрын
That would not be possible with the BW5000, but the Caffewerks Medium Volume System (on our website) would be able to support both and our kits include a tee fitting to split the line.
@Espresso_Breath Жыл бұрын
Any tips on how to reduce noise on the medium volume system? After the accumulator empties, and the pump kicks in, its quite noisy for about 60-90 seconds. It is pretty loud when it kicks in and im talking to customers. the noise is coming from the the pump, and pickup tube itself and not from anywhere else. It seems the pickup tube is vibratiing alot inside the water tank. I've tried multiple different methods on trying to reduce this noise. The aquatainer is on a 3/4 inch rubber mat to help with vibration. Ive been thinking about building some type of soundproof box to cover the pump/accumulator with
@Caffewerks Жыл бұрын
Great question. All pump systems will make sound. Theres no way to silence it completely. Adding a rubber mat under the accumulator & Pump will help with vibrations. The volume level may also be aided by the material your cart is made of, wood vs metal, etc. If you want to send an email with photos of your set up we may be able to come up with more solutions.
@xtremeadventures Жыл бұрын
Very difficult to watch
@Caffewerks Жыл бұрын
Hi! To be fair 2015 was a long time ago in technology for easy video recording! Haha. Check out our newer BW5000 video here: kzbin.info/www/bejne/rKm4poKYr9qegJY
@earthmovement2012 Жыл бұрын
very cool
@Caffewerks Жыл бұрын
Thanks!
@meganlee9937 Жыл бұрын
Thanks! I hope I can figure this out. It is -9° here in MN.
@Caffewerks Жыл бұрын
Send us an email if you need any extra help!
@blakecrovelle Жыл бұрын
dude this video is great! 100% coming back to this once we reach this step! out of curiosity where did you get the actual box/stand you used in this video? its so dope
@Caffewerks Жыл бұрын
Thanks for the kind words! This is our Road Case Coffee Cart - check out our instagram for my photos of it!
@GoFindMaria Жыл бұрын
Looks great! Congratulations
@Caffewerks Жыл бұрын
Thank you!
@Mark-ez4ro Жыл бұрын
Really cool idea!!!
@Caffewerks Жыл бұрын
Glad you think so!
@Mark-ez4ro Жыл бұрын
Wait what’s the power source for the equipment?
@Caffewerks Жыл бұрын
This one is powered by a Honda Generator!
@Mark-ez4ro Жыл бұрын
Oh ok I see great set up
@jordanyard2696 Жыл бұрын
This is so rad. Why is it 220v? How does that work?
@Caffewerks Жыл бұрын
The Espresso Machine requires 220v power.
@zmezgar2387 Жыл бұрын
Didnt read the comments so I am not sure if anyone mentioned or not. Your volumne was way down couldnt hear anything on my end. Barely. All my volumes were up had to use closed caption.
@Caffewerks Жыл бұрын
Hi! To be fair 2015 was a long time ago in technology for easy video recording! Haha. Check out our newer BW5000 video here: kzbin.info/www/bejne/rKm4poKYr9qegJY
@jeffreywetzel558 Жыл бұрын
What an awesome video! I'm in the planning stages of building out my own coffee cart and don't fully understand the pump/plumbing aspects of it. Your video was super clear in walking through the whole process. I feel super confident moving forward with my build now. I'll be coming by when it's time to place an order. Thanks so much!!
@Caffewerks Жыл бұрын
Thanks for the kind words! Drop us an email if you have any questions!
@abubarista Жыл бұрын
Hey! Would y'all recommend this system if I want to only run a milk pitcher rinser? Or would I encounter a lot of issues if I were to do that?
@Caffewerks Жыл бұрын
We would recommend our medium volume system. This would provide minimal results.
@abubarista Жыл бұрын
@@Caffewerks thank you so much!
@cassiegrangroth7756 Жыл бұрын
Has anyone made a coffee cart business and done all the work themselves and been approved by their health department? Any suggestions as to how to get your electrical and water system approved by the health department when doing the work yourself?
@Caffewerks Жыл бұрын
We would love to help you out with this Cassie! You can find a consulting link on our website, we have built carts, and walked 100s though the process of what you need to do to get up and running!
@jaaasper11 Жыл бұрын
Do you have video of installation of your 5 gallon pickup tube to a round gallon? I cant seem to find one and its the usual container here in our country I hope you can make some.
@Caffewerks Жыл бұрын
Process is the same for the 5 gallon container! You would just add the 5 gallon jug lid that comes with the pick up tube in place of the aqua tainer lid